Skip to content
✨ FREE Pattern 🎯 Beginner Friendly ⏱️ Single-Day Project

Boho Paisley Crochet Bedspread Pattern

⏱️ 3–4 hours
↓ Jump to Pattern
Boho Paisley Crochet Bedspread Pattern
✨ FREEBeginner Friendly
🪝

Beginner Friendly

Perfect for those just starting their crochet journey, with clear instructions and simple techniques

⏱️

Single-Day Project

A satisfying project you can complete in a single afternoon or evening.

🎀

Handmade Gift

A beautiful keepsake — free forever. Read online or print at home.

About This Boho Paisley Crochet Bedspread Pattern

This paisley crochet bedspread pattern uses a deep burgundy background to set off large teal and gold paisley appliqués, small floral details, and a decorative border. The motifs are crocheted separately, embellished with embroidery, and sewn onto simple panels, creating a richly layered look inspired by the bedspread in the photo.

This is an advanced project that combines flat panel work, shaped appliqués, color changes, embroidery, and careful layout. A queen-size bedspread can take around 80 to 120 hours, with more time needed for larger beds or extra pillow covers. Measure your mattress and desired drape before starting; the sample dimensions are only a planning guide.

Materials

  • Worsted-weight cotton or cotton blend in deep burgundy Main bedspread color; approximately 2,000-2,600 g for a large bedspread
  • Worsted-weight cotton or cotton blend in warm gold Paisley outlines, floral centers, and border; approximately 800-1,100 g
  • Worsted-weight cotton or cotton blend in teal Paisley centers and accent details; approximately 500-700 g
  • Worsted-weight cotton or cotton blend in cream Small paisley details and embroidery; approximately 250-400 g
  • Small amounts of olive green and muted rose Optional leaf and flower accents
  • 5 mm crochet hook For the background panels
  • 4 mm crochet hook For the paisley appliqués and edging
  • Yarn needle, scissors, and stitch markers For assembly and finishing
  • Blocking mats and rustproof pins To shape the appliqués and panels
  • Tape measure To size the bedspread and plan the layout

Abbreviations

chchain
sl stslip stitch
scsingle crochet
hdchalf double crochet
dcdouble crochet
trtreble crochet
sc2togsingle crochet 2 together
incwork 2 sc in the same stitch
skskip
spspace
reprepeat
st(s)stitch(es)
RSright side
WSwrong side
Before you start: Make one complete paisley appliqué and one background swatch. Block both before measuring them, then plan the motif spacing on paper so the pattern fits your bedspread dimensions.

Burgundy bedspread panels

  1. Measure the mattress width and length, then add the overhang you want on each side and at the foot. Decide whether the top edge will stop below the pillows or cover the full mattress.
  2. With burgundy and the 5 mm hook, make a foundation chain to the width of one panel. Add 2 ch for turning; these turning chains do not count as a stitch.
  3. Row 1: Work 1 dc in the third ch from the hook and 1 dc in each remaining chain. Count the stitches and record the total.
  4. Row 2: Ch 2, turn, and work 1 dc in each stitch across. Keep the same stitch count on every row.
  5. Repeat Row 2 until the panel reaches the planned length. Make separate panels for the center and side sections if the bedspread is too wide to work comfortably as one piece.
  6. To join panels, place them with RS together and sew through the inner loops with a yarn needle. Keep the seam relaxed so the fabric lies flat.
  7. Make a small swatch and measure its stitch and row gauge before calculating the foundation chain and row count. Adjust the hook size if the fabric feels stiff or too open.

Paisley appliqué body

  1. With teal and the 4 mm hook, ch 4. Row 1: Work 3 sc in the second ch from the hook. (3 sts)
  2. Row 2: Ch 1, turn, inc in the first st, sc in the next st, inc in the last st. (5 sts)
  3. Row 3: Ch 1, turn, inc in the first st, sc in each st to the last st, inc in the last st. (7 sts)
  4. Row 4: Ch 1, turn, inc in the first st, sc in each st to the last st, inc in the last st. (9 sts)
  5. Rows 5-7: Ch 1, turn, sc in each st across. (9 sts per row)
  6. Row 8: Ch 1, turn, sc2tog, sc in the next 5 sts, sc2tog. (7 sts)
  7. Row 9: Ch 1, turn, sc in each st across. (7 sts)
  8. Row 10: Ch 1, turn, sc2tog, sc in the next 3 sts, sc2tog. (5 sts)
  9. Row 11: Ch 1, turn, sc in each st across. (5 sts)
  10. Row 12: Ch 1, turn, sc2tog, sc in the next st, sc2tog. (3 sts)
  11. Row 13: Ch 1, turn, sc in each st across. (3 sts)
  12. Row 14: Ch 1, turn, sc2tog, sc in the last st. (2 sts)
  13. Row 15: Ch 1, turn, sc2tog. (1 st) Fasten off, leaving a long sewing tail. The narrow end forms the pointed tip of the paisley.
  14. With gold, join at the wide end and work sc evenly around the outer edge, placing 3 sc in each outer corner and 1 sc at the end of each row. Join with a sl st and fasten off.

Paisley curl and inner outline

  1. With gold, ch 18. Starting in the second ch from the hook, work 1 sl st in each ch. Fasten off, leaving a long tail. The cord should curl naturally; if it does not, gently twist it into a curve.
  2. Pin the cord in a curved line from the narrow tip toward the broad end of the teal body. Sew it down with small matching stitches, shaping the tip into a loose inward curl.
  3. For a second outline, use cream yarn and a yarn needle to embroider a running stitch just inside the gold edge. Keep the stitch length even and avoid pulling the fabric tight.
  4. Make additional motifs in teal, gold, or cream. For a reversed paisley, turn the appliqué over before sewing it onto the background.
  5. Block the finished appliqué flat before attaching it to the bedspread. Pin the curl in place so its curve stays open and visible.

Small floral accent

  1. With gold, make a magic ring. Ch 1, then work 8 sc into the ring. Join with a sl st to the first sc and tighten the ring. (8 sts)
  2. Change to cream. *Ch 3, sl st in the next sc.* Rep from * around to form 8 small petals. Join and fasten off.
  3. With muted rose or teal, make a French knot or a small satin stitch in the center of the flower.
  4. For leaves, with olive green ch 6. Starting in the second ch from the hook, work 1 sl st, 1 sc, 1 hdc, 1 sc, and 3 sc in the last ch. Continue along the other side with 1 sc, 1 hdc, 1 sc, and 1 sl st. Fasten off, leaving a tail for sewing.
  5. Sew one or two leaves behind selected flowers, and attach the flowers to the burgundy background between paisley motifs.

Layout and appliqué placement

  1. Block the burgundy panels and all appliqués before arranging them. Lay the panels flat and mark a loose grid with removable markers or pins.
  2. Place the paisleys in alternating directions, leaving enough burgundy space around each motif to keep the design distinct. Stagger the rows rather than lining up every motif vertically.
  3. Arrange larger teal paisleys as the main accents and smaller gold or cream paisleys between them. Add floral accents sparingly to avoid crowding the surface.
  4. Pin each appliqué from its center outward, then sew around the entire gold outline with small whip stitches. Secure the curled tail at several points so it cannot catch on bedding.
  5. Join the bedspread panels after the motifs are attached if the panels are small enough to handle easily. For a large piece, join panels first and then sew on the motifs over the seam areas only if the layout calls for it.
  6. Check that the motif spacing remains consistent at the edges. Use partial appliqués only where needed to keep the border balanced.

Decorative border

  1. With burgundy and the 4 mm hook, join yarn at a corner. Work sc evenly around the bedspread edge, placing 3 sc in each corner. Along row edges, distribute the sc evenly without pulling or ruffling.
  2. Join with a sl st to the first sc. Round 2: Ch 1, sc in each stitch around, working 3 sc in each corner stitch. Join and fasten off.
  3. Join gold at a corner. Ch 1, sc in the same corner, *ch 3, sk 2 sts, sc in the next st.* Rep from * around, adjusting the skipped stitches near the corners to keep the border flat.
  4. Round 4: In each ch-3 space, work 1 sc, 1 hdc, 1 dc, 1 hdc, and 1 sc. Work 1 sl st in each sc between spaces. At each corner, add one extra ch-3 space if needed to keep the edge from drawing in.
  5. Fasten off and weave in the ends securely. Lay the bedspread flat and block the border gently to even out the scallops.

Optional matching pillow covers

  1. Measure the pillow insert. Make two burgundy rectangles in dc rows, each the width of the insert. Make one panel the full height and the second panel about two-thirds of the height for an overlapping envelope back.
  2. On the overlap edge of the shorter panel, work 3 rows of sc. On the longer panel, work 3 rows of sc and make buttonholes in the final row by chaining 1 and skipping 1 stitch at evenly spaced intervals.
  3. Arrange one or two paisley appliqués and small floral accents on the front panel. Sew them down securely, especially around the narrow curled tips.
  4. With WS together, overlap the back panels and sc around the outer edge, placing 3 sc in each corner. Insert the pillow form and mark the button positions through the buttonholes.
  5. Sew on buttons securely, then check that the envelope opening closes without stretching the fabric.

Finishing

Weave in all remaining ends and check the appliqués for loose edges, especially around the curled tips. Lay the bedspread flat, smooth the border, and block it gently according to the yarn label. Let it dry completely before placing it on the bed. If you made matching pillow covers, align their paisley direction with the main bedspread for a coordinated set.

Tips for success

  • Keep a written count of each appliqué row; the paisley shape depends on balanced increases and decreases at both edges.
  • Use a smaller hook for the motifs than for the background so the appliqués stay firm and hold their shape.
  • Pin the curl in place before sewing it down, and secure it at several points so the narrow cord does not lift during use.
  • Arrange all motifs before sewing any of them. A paper layout makes it easier to balance large and small paisleys across the bed.
  • Test the border on a swatch with the same panel edge stitch pattern; the number of spaces may need adjustment to lie flat.

Common mistakes to avoid

  • Uneven paisley sides: an increase or decrease was missed. Count each row and check that the increases are at both ends of the row.
  • A curled appliqué edge: the stitches are too tight or the piece was not blocked. Pin it to measurements and steam or wet-block according to the yarn label.
  • A border that waves: too many stitches were added along the row edges. Remove the border round and redistribute the sc evenly.
  • A stiff or puckered appliqué: the sewing stitches were pulled too tightly. Unpick the affected section and resew with small, relaxed stitches.
  • Motifs that look crowded: appliqués were sewn down before checking the full layout. Unpin and rearrange them with more negative space around the larger paisleys.

Ways to customize this pattern

  • Replace burgundy with deep forest green, navy, or plum while keeping gold as the contrast color.
  • Make the paisleys smaller for a tighter repeat, or add extra straight rows to the body for larger appliqués.
  • Use cream for the main paisley body and teal for the curl to create a lighter, more open design.
  • Add small embroidered dots or chain-stitch vines around selected motifs for extra surface detail.
  • Make a coordinating table runner or cushion covers using the same paisley appliqués on a smaller burgundy panel.

Frequently asked questions

The number depends on the finished size of each appliqué and the spacing you prefer. Make one motif, measure it after blocking, then sketch a layout across the measured bedspread panels before crocheting the rest.

You can surface crochet the curl and small accents, but the shaped paisley body is easier to control as a separate appliqué. Sewing it on afterward also lets you block the motif independently and adjust the layout.

Fasten off both ends securely, then sew the cord down along its length with matching yarn. Add extra stitches around the inner curl and narrow tip, where the cord is most likely to lift.

Yes. Make fewer burgundy panels and scale the layout to your preferred blanket size. Keep the appliqués spaced evenly and reduce the border width if the blanket is intended for everyday use.

Boho Paisley Crochet Bedspread Pattern

The finished Boho Paisley Crochet Bedspread Pattern

🧶
Cozy Amigurumi

All our free patterns are tested multiple times by real makers before publishing. We believe clear, beautiful patterns should be free for everyone.

Read Our Story →
🎁

Get Free Patterns in Your Inbox

New free amigurumi patterns every week — no spam, unsubscribe anytime.

🔒 No spam · Unsubscribe anytime · 100% free patterns only

Made this? Share it! 📸 Tag #CozyCrochetPatterns on Instagram or Pinterest

Want More?

More Free Patterns Coming Soon 🎀

Instant PDF delivery. All tested. All beautiful.

Browse More Free Patterns →
Stay in the Loop

Free patterns + tips every week 📬

Join 1106 crocheters — no spam, just yarny goodness.

We respect your privacy. Unsubscribe anytime. Privacy Policy