Skip to content
✨ FREE Pattern 🎯 Beginner Friendly ⏱️ Single-Day Project

Burgundy and Blush Flower Vine Table Runner Crochet Pattern

⏱️ 3–4 hours
↓ Jump to Pattern
Burgundy and Blush Flower Vine Table Runner Crochet Pattern
✨ FREEBeginner Friendly
🪝

Beginner Friendly

Perfect for those just starting their crochet journey, with clear instructions and simple techniques

⏱️

Single-Day Project

A satisfying project you can complete in a single afternoon or evening.

🎀

Handmade Gift

A beautiful keepsake — free forever. Read online or print at home.

About This Burgundy and Blush Flower Vine Table Runner Crochet Pattern

This crochet flower table runner pattern strings five large, eight-petal flowers down a single line, alternating deep burgundy and soft blush pink, each centered on a raised cream textured disc. Between and around every bloom, a slim olive green vine carries small leaves, tiny pink accent flowers, and a scattering of miniature bud clusters, so the whole runner reads as a continuous garden rather than a row of separate flowers. A small tassel finishes the top end.

What makes this design distinctive is the layered petal shape used for every large flower: each of the 8 petals is worked individually with a slight domed texture rather than flat lace loops, giving the blooms real weight and dimension against the delicate, open vine connecting them. Mixing two flower colors on repeat down the line, rather than using a single shade throughout, is what gives the finished piece its rich, jewel-toned rhythm. Expect to spend 22-26 hours total across 5 large flowers, roughly 10 small accent flowers, 16 leaves, and the connecting vine.

This is an advanced pattern, best suited to someone comfortable working individually shaped, slightly domed petals and confident assembling a vine-connected line of large motifs, rather than someone wanting a flat, single-technique project.

Materials

  • DK weight cotton yarn, burgundy wine ~60g, 3 flowers
  • DK weight yarn, blush pink ~60g, 2 flowers
  • DK weight yarn, cream ~30g, flower centers
  • DK weight yarn, pale pink ~20g, small accent flowers
  • DK weight yarn, olive green ~50g, vine and leaves
  • DK weight yarn, sage green ~20g, bud accents
  • Crochet hook 3.5 mm (US E/4)
  • Tapestry/yarn needle
  • Steam iron and pressing cloth, or blocking mat and pins
  • Sharp scissors

Abbreviations

chchain
sl stslip stitch
scsingle crochet
hdchalf double crochet
dcdouble crochet
MRmagic ring
incincrease (2 sc in one st)
BLOback loop only
st(s)stitch(es)
reprepeat
FOfasten off
Before you start: Make one complete large flower and lay it against a length of vine before starting the rest; confirming the flower’s finished width now tells you exactly how much vine to work between each bloom.

Large Flower Center (make 5)

  1. With cream, 8 sc in MR. (8 sts)
  2. Round 2: inc in each st around. (16 sts)
  3. Round 3, worked in BLO only: sc around even to raise a slight dome. (16 sts)
  4. Round 4: sc around even, both loops now. (16 sts)
  5. Sl st to close, FO leaving a short tail. Repeat for 5 centers total.

Large Flower Petals (make 5: 3 burgundy, 2 blush)

  1. With petal color, join in any st along the outer edge of a finished center. Work each of 8 petals individually rather than in one continuous round: ch 2, (sc, hdc, 2 dc, hdc, sc) in the 2nd ch from hook, sl st into the next base st on the center to anchor the petal.
  2. Repeat this individual petal 8 times total, evenly spaced around the center, sl st between each to keep spacing even.
  3. FO leaving a long tail for joining to the vine. Repeat for all 5 flowers, alternating burgundy and blush in this order: burgundy, blush, burgundy, blush, burgundy.

Small Accent Flower (make approximately 10, in pale pink)

  1. Ch 2. Round 1: 6 sc in 2nd ch from hook, do not join, work in a continuous spiral.
  2. Round 2: *ch 2, sl st in same st, sl st in next st; rep from * around all 6 sts to form 6 small petals.
  3. FO leaving a short tail for attaching. Repeat for approximately 10 flowers total, 2 per large flower.

Leaf Motif (make approximately 16, in olive green)

  1. Ch 8. Starting in 2nd ch from hook: sl st, sc 2, hdc 2, dc 1, 3 dc in last ch.
  2. Continue down the other side: dc 1, hdc 2, sc 2, sl st in last ch.
  3. FO leaving a short tail for attaching. Repeat for approximately 16 leaves total.

Bud Accents (make approximately 8, in sage green)

  1. 5 sc in MR. Pull the MR tail tight to close, then sl st into the first sc to close into a small tight bud shape.
  2. FO leaving a short tail for attaching. Repeat for approximately 8 total, tucked among the leaves.

Connecting Vine

  1. With olive green, ch a length matching your planned spacing between the first and last flower, approximately 100 cm total, to form the vine’s main spine.
  2. Sl st back down the entire chain for body and a smooth edge. FO leaving tails at both ends.

Tassel (make 1, for the top end)

  1. Wrap olive green yarn around 2 fingers or a small piece of cardboard approximately 20 times.
  2. Tie tightly at the top with a separate strand, leaving a long end for attaching, then cut through the loops at the bottom to release the tassel strands.
  3. Wrap and tie a separate strand around the tassel a short distance below the top tie to form its neck, then trim the ends evenly.

Assembly

  1. Pin the vine down the center of your work surface, curving it gently side to side rather than in a straight line.
  2. Position the 5 large flowers evenly along the vine in the alternating color order established earlier, and pin.
  3. Sew each flower down firmly through its center into the vine below.
  4. Tuck and tack 3-4 leaves around the base of each flower, angling them outward, and tack 2 small accent flowers and 1-2 bud accents near each large flower.
  5. Attach the finished tassel to the very top end of the vine, above the first flower.

Finishing

Turn the finished runner over and check for any flower or leaf held by only a single stitch; add a second point wherever a piece feels loose. Weave in all remaining tails. Steam-block gently, keeping the large flower petals slightly domed rather than pressed flat, and let the whole piece dry completely before moving it to the table.

Tips for Success

  • Work each large flower’s BLO center round carefully; skipping it or working through both loops flattens the raised dome effect.
  • Keep all 8 petals on each large flower evenly spaced; uneven spacing is very visible on a flower this size.
  • Strictly alternate burgundy and blush down the line as given, rather than randomizing, to match the clean color rhythm shown in the photo.
  • Curve the vine loosely rather than pinning it straight, for a more natural, garden-like flow.
  • Vary leaf and accent flower placement slightly at each large flower rather than repeating an identical arrangement every time.

Common Mistakes to Avoid

  • Working large flower petals in one continuous round instead of individually loses the slightly domed, dimensional shape. Fix: work each petal as its own small piece anchored with a sl st, as instructed.
  • Alternating flower colors inconsistently breaks the clean rhythm down the runner. Fix: strictly follow burgundy-blush-burgundy-blush-burgundy in order.
  • Sewing large flowers down around their outer petals instead of through the center flattens their dimension. Fix: stitch through the center only so petals stay raised.
  • Placing leaves and accent flowers identically at every large flower looks repetitive across the runner’s length. Fix: vary angle and spacing slightly at each flower position.
  • Pinning the vine in a perfectly straight line looks stiff. Fix: curve it gently from side to side as you pin.

Ways to Customize This Pattern

  • Reduce to 3 large flowers for a shorter runner suited to a smaller table.
  • Swap burgundy and blush for a different two-color combination, such as navy and dusty blue, for a different palette.
  • Use a single flower color throughout instead of alternating two for a more cohesive, monochrome look.
  • Add a second tassel at the bottom end for a symmetrical finish on both sides.
  • Scale each large flower down slightly for a set of matching coasters using the same motif.

Frequently asked questions

Count the center’s stitches and divide by 8 before starting, marking every few stitches with a scrap of yarn if needed, so each petal anchors at a consistent interval rather than being placed by eye alone.

Yes. Add flowers in pairs to keep the alternating color pattern balanced, and extend the vine length and leaf count proportionally to match.

One tassel, as shown in the photo, is enough for a finished look, though adding a matching tassel at the bottom end gives the runner a fully symmetrical finish if you prefer that.

This usually means the BLO round was worked through both loops by mistake. Check that Round 3 of the center is worked in back loop only to create the raised ridge that lets the dome build properly.

Burgundy and Blush Flower Vine Table Runner Crochet Pattern

The finished Burgundy and Blush Flower Vine Table Runner Crochet Pattern

🧶
Cozy Amigurumi

All our free patterns are tested multiple times by real makers before publishing. We believe clear, beautiful patterns should be free for everyone.

Read Our Story →
🎁

Get Free Patterns in Your Inbox

New free amigurumi patterns every week — no spam, unsubscribe anytime.

🔒 No spam · Unsubscribe anytime · 100% free patterns only

Made this? Share it! 📸 Tag #CozyCrochetPatterns on Instagram or Pinterest

Want More?

More Free Patterns Coming Soon 🎀

Instant PDF delivery. All tested. All beautiful.

Browse More Free Patterns →
Stay in the Loop

Free patterns + tips every week 📬

Join 1106 crocheters — no spam, just yarny goodness.

We respect your privacy. Unsubscribe anytime. Privacy Policy