Burgundy Orchid Flower Crochet Blanket
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Burgundy Orchid Flower Crochet Blanket
This orchid crochet blanket pattern covers a bed in 80 deep burgundy squares, each topped with its own three-dimensional white orchid with a ruffled pink center. The squares are worked in dense single crochet with raised ridges, and the flowers are made separately from five broad petals, a ruffled lip and a small yellow button, then sewn on. Joined with raised seams, the squares look like a bed of blooming orchids seen from above.
The flowers look delicate, but they are made from simple shapes. Every petal is the same, and the lip and center are small flat discs, so once you have made one orchid you have made them all. The challenge is the volume: this is a big, heavy project, so the pattern is written for making squares and flowers in batches and putting them together at the end.
Plan on about two hours per finished square, so roughly 150 to 170 hours for the full bed size, or about 60 hours for a throw. It suits crocheters who are comfortable with single crochet in the round, working in the back loop only, and basic sewing. The pattern also includes matching pillow covers.
Materials
- Bulky (weight 5-6) yarn in burgundy / plum about 2,500 m (2,730 yd) for the bed-size blanket with border
- Bulky (weight 5-6) yarn in cream / white about 950 m (1,040 yd) for 80 flowers
- Bulky (weight 5-6) yarn in orchid pink about 260 m (285 yd)
- Bulky (weight 5-6) yarn in yellow about 80 m (90 yd)
- Extra yarn for two pillow covers about 450 m (490 yd) burgundy, 60 m cream, 20 m pink, 10 m yellow
- 6 mm (US J-10) crochet hook
- 8 mm (US L-11) crochet hook only for the large pillow flowers
- Large-eye tapestry needle for sewing on the flowers and seaming
- 4 stitch markers one per corner
- Blocking mats and rustproof pins
- Two 40 cm (16 in) pillow inserts optional, for the pillow covers
Abbreviations
MRmagic ringchchainscsingle crochetsl stslip stitchst(s)stitch(es)incincrease: 2 sc in the same stcnrcorner: 3 sc in the same stBLOback loop onlyRSright side4 scsc in each of the next 4 sts (same idea for any number)Square Base (make 80 for the bed size)
The square is worked in burgundy from the center out, counterclockwise, as a continuous spiral with no joining and no turning. Place a marker in the center sc of each cnr and move it up each round. Every round has 4 corners, and the stitch count in brackets is the total for the round. Rounds 5, 8, 11 and 14 are worked in BLO, including the corner stitches (work the 3 sc of each cnr in the back loop of the corner st). The unworked front loops are left behind as raised ridges on the right side.
- Rd 1: 4 sc in MR. Pull the tail to close the ring tightly. Do not join. (4)
- Rd 2: cnr in each st. (12)
- Rd 3: 1 sc, cnr, 2 sc, cnr, 2 sc, cnr, 2 sc, cnr, 1 sc. (20)
- Rd 4: 1 sc, cnr, 4 sc, cnr, 4 sc, cnr, 4 sc, cnr, 3 sc. (28)
- Rd 5 (BLO): 1 sc, cnr, 6 sc, cnr, 6 sc, cnr, 6 sc, cnr, 5 sc. (36)
- Rd 6: 1 sc, cnr, 8 sc, cnr, 8 sc, cnr, 8 sc, cnr, 7 sc. (44)
- Rd 7: 1 sc, cnr, 10 sc, cnr, 10 sc, cnr, 10 sc, cnr, 9 sc. (52)
- Rd 8 (BLO): 1 sc, cnr, 12 sc, cnr, 12 sc, cnr, 12 sc, cnr, 11 sc. (60)
- Rd 9: 1 sc, cnr, 14 sc, cnr, 14 sc, cnr, 14 sc, cnr, 13 sc. (68)
- Rd 10: 1 sc, cnr, 16 sc, cnr, 16 sc, cnr, 16 sc, cnr, 15 sc. (76)
- Rd 11 (BLO): 1 sc, cnr, 18 sc, cnr, 18 sc, cnr, 18 sc, cnr, 17 sc. (84)
- Rd 12: 1 sc, cnr, 20 sc, cnr, 20 sc, cnr, 20 sc, cnr, 19 sc. (92)
- Rd 13: 1 sc, cnr, 22 sc, cnr, 22 sc, cnr, 22 sc, cnr, 21 sc. (100)
- Rd 14 (BLO): 1 sc, cnr, 24 sc, cnr, 24 sc, cnr, 24 sc, cnr, 23 sc. (108) Sl st in the next st and fasten off. Weave in all ends. The square measures 20 cm (8 in) after blocking.
Orchid Petal (cream, make 5 for each flower)
Each petal is worked around a foundation chain and is flat, broad and rounded at the tip. Leave a 25 cm tail on each petal for sewing.
- Rd 1: Ch 6. Sc in the 2nd ch from hook and the next 3 ch (4 sc), 3 sc in the last ch, then 4 sc down the other side of the foundation chain. Do not join. (11)
- Rd 2: 4 sc, inc, 3 sc in the next st, inc, 4 sc. (15)
- Rd 3: 5 sc, inc in each of the next 5 sts, 5 sc. Sl st in the next st and fasten off, leaving a 25 cm tail at the base. (20)
Orchid Lip (pink, make 1 for each flower)
The lip is a small disc with a ruffled edge. The last round has more stitches than the surface can hold, so it frills naturally.
- Rd 1: 6 sc in MR. (6)
- Rd 2: inc in each st around. (12)
- Rd 3: [1 sc, inc] 6 times. (18)
- Rd 4: inc in each st around. Sl st in the next st and fasten off, leaving a 25 cm tail. (36)
Yellow Center (yellow, make 1 for each flower)
- Rd 1: 6 sc in MR. (6)
- Rd 2: [1 sc, inc] 3 times. Sl st in the next st and fasten off, leaving a 25 cm tail. (9)
Assembling the Flower on the Square
- Block the square and all the flower pieces before you sew anything. Pin each petal flat and let it dry so the edges stay smooth.
- Find the center of the square (the MR) and mark it with a pin. Arrange the 5 petals like a five-pointed star, tips pointing out, with one petal at the top and the others evenly spaced (72 degrees apart). Overlap the bases at the center by about 1 cm and pin them in place.
- Sew each petal down with its tail, stitching across the base and tacking the lower 1 cm of each side edge so the rounded tip stays free.
- Sew the pink lip over the petal bases at the center, stitching around Round 3 so the ruffled Round 4 stands free and covers the petal ends.
- Sew the yellow center in the middle of the lip.
- Optional: with pink yarn, add 3 or 4 French knots near the base of each petal for orchid markings.
Layout and Sizing
- Turn every square the same way, with one petal at the top, so the flowers line up across the blanket.
- Sizes: throw, 5 squares across by 6 down (30 squares), about 100 x 120 cm. Twin, 6 across by 9 down (54 squares), about 120 x 180 cm. Full or double, 8 across by 10 down (80 squares), about 160 x 200 cm. The border adds about 6 cm in each direction.
- Lay out all the squares on the floor and take a photo before you join anything.
Joining the Squares
- Join the squares into rows first, then join the rows to each other.
- Place two squares with wrong sides together and edges touching. Join burgundy at one corner and slip stitch through the outer loops of both squares, working one sl st in each pair of sts. The seam ridge forms on the side facing you, so keep the right side toward you.
- Match the corners first, then ease the 24 sts between the corners.
- Where four squares meet, work the sl sts across the join in a plus shape so there is no gap at the center.
Border
- Rd 1: Join burgundy at any outer corner of the blanket. Work 3 sc in the corner, then 1 sc in each st along the edge and 1 sc in each seam, with 3 sc in every remaining outer corner. Join with a sl st to the first sc.
- Rd 2: Ch 1, sc in each st around with 3 sc in each outer corner. Join with a sl st, fasten off, and weave in the end.
Matching Pillow Cover (make 2)
- Make 8 base squares for each cover: 4 for the front and 4 for the back.
- Join the 4 front squares into a 2 x 2 panel using the sl st seam. Join the 4 back squares into the back panel the same way. Each panel measures about 40 cm (16 in) square.
- For the large front flower, make the petals, lip and center with an 8 mm hook and two strands of yarn held together. The flower measures about 18 cm (7 in) across. Sew it to the center of the front panel, over the seam crossing, as in the assembly steps.
- With wrong sides together, seam the panels along three sides using sl st.
- Insert the 40 cm pillow and close the fourth side with whip stitch, or sew on snaps if you want to remove the insert for washing.
Finishing
Weave in every end before blocking, as each square and petal has a few and they are easiest to hide while the pieces are small. Block the finished blanket flat, following your yarn’s care label: wet-block wool, and steam acrylic by holding the iron above the fabric without pressing. Be careful not to flatten the flowers. The blanket is thick and heavy, so wash it gently and dry it flat to keep the ridges and petals full.
Tips for Success
- Make the squares and flowers in batches of ten, block them together, and sew the flowers on in front of the television. It keeps the project from feeling endless.
- Keep your tension firm. The dense fabric supports the heavy flower and keeps the ridges crisp.
- Pin the petals in position before you sew. A quick photo of your pinned layout helps you copy it exactly on the next square.
- Mark the BLO rounds on your first square with a stitch marker or a note so you do not lose track of the ridge rhythm.
- Weigh your first finished square and flower, then multiply by your square count to check you have enough yarn before you begin the rest.
Common Mistakes to Avoid
- Working a BLO round in both loops loses a ridge. If you notice it within a round or two, rip back so the ridges stay evenly spaced.
- Sewing the petals down flat kills the 3D effect. Stitch only the base and the lower edge, and let the tips lift.
- Sewing the flower on before blocking the square can leave the square puckered. Always block the square first.
- Skipping a corner increase turns the square into a rounded blob. Always work 3 sc in each marked corner stitch.
- Using a hook that is too large leaves the fabric loose, and the flower sags. Drop down half a size so it stays dense.
Ways to Customize This Pattern
- Change the flower colors. Pale pink, yellow or lavender petals on the same burgundy ground all look striking.
- Make the ground navy, forest green or charcoal for a different mood, keeping the petals pale so they stand out.
- Skip the flowers on alternate squares for a lighter, quicker blanket that still shows off the ridged base.
- Make a throw or baby blanket using the smaller sizes in the Layout and Sizing section.
- Add a tiny second orchid bud, made from one petal and a small yellow button, at a square corner for a more garden-like look.
Frequently asked questions
Yes. Every base square and every flower is made exactly the same way. Only the pillow backs differ, because they are left plain.
Yes. Worsted yarn and a 4 mm hook make a much lighter blanket, but you will need about 18 rounds per square. Make a test square and measure it before you start the rest.
The petals are firmly stitched and fairly sturdy, but wash the blanket on a gentle cycle inside a pillowcase or by hand, and dry it flat. Avoid the dryer, which can flatten the ruffles and fray the petal edges.
About two hours including the flower and sewing, a little longer for the first few. The base takes about 55 minutes, the flower about 55 minutes and the sewing about 10 minutes.
The finished Burgundy Orchid Flower Crochet Blanket