Coneflower Bedspread and Cushions Crochet Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Coneflower Bedspread and Cushions Crochet Pattern
This coneflower crochet bedspread fills a bed with summer meadow flowers: 72 sage green granny squares, each topped with a large 3D pink echinacea. Fourteen long petals droop gently around a domed rust-orange cone covered in popcorn stitches, just like the real flower’s spiky center. A wide pink border frames the bed, and two cushions each carry one oversized coneflower.
The flower is made in two parts. The petals are worked all in one piece: each one is chained out from a small center ring, worked back down, then outlined in a final round, which gives every petal a raised center vein. The cone is a small dome of popcorn stitches, lightly stuffed, that sits on top of the ring. The squares are joined with raised seams that make a neat green grid between the flowers.
The full set takes around 190 to 220 hours. Each square and its flower take about two and a half hours together. It suits a crocheter who is comfortable with granny squares, popcorn stitches and working into the free loops of a chain.
Materials
- Worsted weight acrylic blend, sage green about 3,000 m (15 skeins of 100 g / 200 m)
- Worsted weight acrylic blend, rose pink about 2,000 m (10 skeins)
- Worsted weight acrylic blend, rust orange about 700 m (4 skeins)
- 5 mm crochet hook for the squares, joining and border
- 4 mm crochet hook for the petals and cones
- Polyester fiberfill a small bag, for the cones
- Two 45 cm square cushion forms
- Tapestry needle, stitch markers and scissors
Abbreviations
MRmagic ringchchainscsingle crochethdchalf double crochetdcdouble crochetsl stslip stitchpopcorn4 dc in the same st, drop the loop from the hook, insert hook from front to back through the top of the first dc, pick up the dropped loop and pull it throughrev screverse single crochet (crab stitch), worked left to rightspspacest(s)stitch(es)rndroundreprepeatRS / WSright side / wrong sideGreen Square (make 72)
- Rnd 1: with sage green and 5 mm hook, MR, ch 3 (counts as dc here and throughout), 2 dc in ring, ch 2, *3 dc in ring, ch 2; rep from * 2 more times, join with sl st to top of ch 3. Pull the ring tight. (12 dc, 4 corner ch-2 sps)
- Rnd 2: sl st in next 2 dc and in corner sp, ch 3, (2 dc, ch 2, 3 dc) in same sp, ch 1, *(3 dc, ch 2, 3 dc) in next corner sp, ch 1; rep from * 2 more times, join. (2 groups per side, 24 dc)
- Rnd 3: sl st in next 2 dc and in corner sp, ch 3, (2 dc, ch 2, 3 dc) in same sp, ch 1, *3 dc in each ch-1 sp to next corner with ch 1 between groups, (3 dc, ch 2, 3 dc) in corner sp, ch 1; rep from * 2 more times, 3 dc in each remaining ch-1 sp with ch 1 between groups, join. (3 groups per side, 36 dc)
- Rnds 4-8: rep Rnd 3, adding 1 group per side each rnd. (Rnd 4: 48 dc, Rnd 5: 60, Rnd 6: 72, Rnd 7: 84, Rnd 8: 8 groups per side, 96 dc)
- Rnd 9: sl st in next 2 dc and in corner sp, ch 1, (sc, ch 2, sc) in same sp, *sc in each dc and each ch-1 sp to next corner, (sc, ch 2, sc) in corner sp; rep from * 2 more times, sc in each remaining dc and ch-1 sp, join. Fasten off. (33 sc per side, 132 sc)
- The square measures about 26 cm.
Popcorn Cone (make 72)
- With rust orange and 4 mm hook, work in joined rnds.
- Rnd 1: MR, ch 1, 6 sc in ring, join with sl st to first sc. Pull the ring tight. (6 sts)
- Rnd 2: ch 1, 2 sc in each st around, join. (12 sts)
- Rnd 3: ch 1, *popcorn in next st, 2 sc in next st; rep from * 5 more times, join. (18 sts, including 6 popcorns)
- Rnd 4: ch 1, *sc in next popcorn, popcorn in next st, 2 sc in next st; rep from * 5 more times, join. (24 sts, including 6 popcorns)
- Rnd 5: ch 1, *popcorn in next st, sc in next 3 sts; rep from * 5 more times, join. (24 sts, including 6 popcorns)
- Rnd 6: ch 1, *sc in next 2 sts, popcorn in next st, sc in next st; rep from * 5 more times, join. (24 sts, including 6 popcorns)
- Fasten off leaving a 40 cm tail. Rnds 5 and 6 don’t increase, so the cone curves into a dome about 6 cm across and 3 cm tall, open at the bottom.
Petal Ring (make 72)
- Rnd 1: with rose pink and 4 mm hook, MR, ch 3 (counts as dc), 13 dc in ring, join with sl st to top of ch 3. Pull the ring tight. (14 sts)
- Rnd 2 (petals): *ch 13, sc in 2nd ch from hook, hdc in next ch, dc in next 8 ch, hdc in next ch, sc in next ch, sl st in next st of Rnd 1; rep from * 13 more times. The last sl st goes into the joining st. (14 petals)
- Rnd 3 (outline): *working up the free loops on the other side of the petal’s chain, sc in each of the 12 ch, (sc, ch 2, sc) in the tip ch, sc in each of the 12 sts down the petal, sl st in the sl st between this petal and the next; rep from * 13 more times. (26 sc per petal, 364 sc)
- Fasten off leaving a 50 cm tail. The flower measures about 18 cm across, and the foundation chain of each petal forms a raised vein down its center.
Assembling Each Square
- Place the petal ring in the center of a square. With the pink tail, sew Rnd 1 of the ring to the square all around.
- Sew each petal down along the inner half of its length only, leaving the outer half free so the petals droop and lift slightly like a real coneflower.
- Stuff the cone lightly with fiberfill and place it over the center of the ring. With the rust tail, sew the bottom edge of the cone to the ring and the square all around.
- Press the cone gently from the top so it settles into a rounded dome.
Joining the Squares
- Lay out 72 squares, 8 across and 9 long.
- Join method: hold two squares WS together with the edges matched. With sage green and 5 mm hook, sl st through both loops of both squares in each matching st, starting and ending in the corner ch-2 sps. (35 sl st per side, including both corners) This leaves a raised ridge on the RS.
- Join the squares into rows of 8, then join the rows along their long edges.
- Where four corners meet, work through all four corner sps so no gap is left.
- The joined bedspread measures about 208 x 234 cm.
Pink Border
- Rnd 1: with rose pink and 5 mm hook, RS facing, join in a corner sp. Work 3 sc in each bedspread corner sp, sc in each st along the edge of every square, and 1 sc in each point where two squares meet. Join. (305 sc along each long side, 271 along each short side and 12 at the corners: 1,164 sts)
- Rnd 2: ch 2 (does not count as a st), hdc in each st around, working 3 hdc in the center st of each corner. Join. (1,172 sts)
- Rnds 3-6: rep Rnd 2, adding 8 sts each rnd. (Rnd 3: 1,180 sts, Rnd 4: 1,188, Rnd 5: 1,196, Rnd 6: 1,204)
- Rnd 7: ch 1, rev sc in each st around. Join and fasten off. (1,204 sts)
- The border is about 6 cm wide.
Large Cushion Squares (make 4)
- Work Rnds 1-8 of the Green Square. (8 groups per side, 96 dc)
- Rnds 9-13: work as Rnd 3, adding 1 group per side each rnd. (Rnd 9: 108 dc, and so on to Rnd 13: 13 groups per side, 156 dc)
- Rnd 14: work as Rnd 9 of the Green Square. Fasten off. (53 sc per side, 212 sc)
- Each large square measures about 43 cm. Make 2 fronts and 2 backs.
Large Coneflower (make 2)
- Large cone: work Rnds 1-4 of the Popcorn Cone. (24 sts)
- Rnd 5: ch 1, *popcorn in next st, sc in next 2 sts, 2 sc in next st; rep from * 5 more times, join. (30 sts, including 6 popcorns)
- Rnd 6: ch 1, *sc in next 2 sts, popcorn in next st, sc in next 2 sts; rep from * 5 more times, join. (30 sts)
- Rnd 7: ch 1, *popcorn in next st, sc in next 4 sts; rep from * 5 more times, join. (30 sts)
- Rnd 8: work as Rnd 6. Fasten off. (30 sts) The cone is about 9 cm across.
- Large petal ring, Rnd 1: with rose pink, MR, ch 3, 17 dc in ring, join. (18 sts)
- Rnd 2: *ch 19, sc in 2nd ch from hook, hdc in next 2 ch, dc in next 12 ch, hdc in next 2 ch, sc in next ch, sl st in next st of Rnd 1; rep from * 17 more times. (18 petals)
- Rnd 3: *sc in each of the 18 free loops up the chain, (sc, ch 2, sc) in the tip ch, sc in each of the 18 sts down the petal, sl st between petals; rep from * 17 more times. Fasten off. (38 sc per petal) The flower is about 26 cm across.
- Assemble on a front square as for the bedspread.
Cushion Assembly
- Hold a front and a back WS together, with the front facing you and the corners matched.
- Rnd 1: with sage green, join in a corner sp through both layers. Working through both layers, 3 sc in each corner sp and sc in each st along the sides. Insert the cushion form before closing the last side. Join. (224 sts: 56 per side including corners)
- Rnd 2: ch 1, rev sc in each st around. Join and fasten off. (224 sts)
- Rep with the second cushion.
Finishing
Weave in all ends on the WS. Run the pink and rust tails under the flower so they don’t show through the open granny stitches of the green squares.
Lay the bedspread flat and steam the squares and border lightly, holding the iron well above the flowers so you don’t flatten the cones or petals. Once dry, lift the free ends of the petals with your fingers so they droop evenly around each cone.
Tips for Success
- Make the cones in batches. Popcorn stitches are quickest once you’re in a rhythm, and batching keeps the domes the same size.
- Pull each popcorn closed firmly so it pops forward. A loose popcorn lies flat and the cone loses its knobby texture.
- Keep the petal chains even. A loose chain makes a longer petal, and uneven petals make the flower look lopsided.
- Stuff the cones only lightly. Too much stuffing makes them hard and round instead of softly domed.
- Sew all the flowers on before joining the squares, while the backs of the squares are still easy to reach.
Common Mistakes to Avoid
- A flat cone. If you keep increasing in Rnds 5 and 6, the cone stays flat like a coaster. Those two rnds must stay at 24 sts.
- Popcorns on the wrong side. If the bumps appear on the inside of the dome, you closed the popcorn from back to front. Always insert the hook from front to back to close it.
- Petals that twist. Working into the wrong side of the chain in Rnd 3 twists the petal. Work up the free loops on the opposite side from the stitches of Rnd 2.
- Petals sewn down flat. Sewing the whole petal loses the drooping look. Sew only the inner half.
- Gaps at the four-corner points. Work the join through all four corner sps where squares meet.
Ways to Customize This Pattern
- Mix the petal colors: pink, purple, white and orange coneflowers all grow in gardens and look great together.
- Make black-eyed Susans instead with yellow petals and a dark brown cone.
- Change the size: each square adds 26 cm. A throw of 5 by 6 squares with the border is about 142 x 168 cm.
- Put a flower on every other square only for a lighter checkerboard look that uses half the pink and rust yarn.
- Work the border in sage green with a single pink rnd at the edge for a softer frame.
Frequently asked questions
Working them all from one center ring saves sewing 14 separate petals on every square, and it keeps them evenly spaced around the cone. The outline round makes each petal look as full as a separately made one.
They are lightly stuffed and spring back after being pressed. If they flatten over time, push them up from underneath and give them a little steam.
Yes. Start the petals with ch 10 instead of ch 13 and work dc in only 5 ch, then outline with 9 sc up and down. The flower will be about 14 cm across, leaving more green showing around it.
Wash it on a gentle cold cycle inside a large laundry bag, or by hand, and dry it flat. Shape the petals and push the cones back into domes while they are still damp.
The finished Coneflower Bedspread and Cushions Crochet Pattern