Cream and Camel Flower Motif Bedspread Crochet Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Cream and Camel Flower Motif Bedspread Crochet Pattern
This six-petal flower crochet bedspread is made from 147 flowers in soft cream and warm camel, mixed across the bed so the colors flicker like light through leaves. Each flower has a ring of eyelets at its center and six pointed petals, every one with an open teardrop in the middle and a raised outline around its edge. The flowers are joined petal to petal in a honeycomb, with little cream stars filling the gaps. Two pillow shams and a ribbed lumbar pillow with pompoms complete the set.
Six petals are a perfect fit for a honeycomb layout: each petal points straight at one of the flower’s six neighbors, so every petal tip joins to another flower. The open teardrops come from chain loops stretched over skipped stitches, and the final outline round, worked in the back loops, gives each petal its crisp, raised edge. The star fillers tie the petal sides together so the lace lies flat and firm.
The set takes about 130 to 150 hours. Each flower takes around 35 minutes and each filler a few minutes, which makes this a good project to work on in short sessions. It suits a crocheter who is comfortable joining motifs as they go.
Materials
- Worsted weight cotton blend, cream about 1,600 m (8 skeins of 100 g / 200 m)
- Worsted weight cotton blend, camel about 1,900 m (10 skeins), including sham backs and the lumbar pillow
- 5 mm crochet hook
- Pompom maker about 3 cm, for the lumbar pillow
- Stitch markers a few, for marking the first petal
- Tapestry needle and scissors
- Two 50 x 75 cm pillows and one 30 x 50 cm cushion form
Abbreviations
MRmagic ringchchainscsingle crochethdchalf double crochetdcdouble crochettrtreble crochetsl stslip stitchBLOback loop onlyrev screverse single crochet (crab stitch), worked left to rightskskipspspacest(s)stitch(es)rndroundreprepeatJAYGjoin as you goRS / WSright side / wrong sideFlower Center (Rnds 1-3)
- Make 74 flowers in cream and 73 in camel.
- Rnd 1: MR, ch 3 (counts as dc), 11 dc in ring, join with sl st to top of ch 3. Pull the ring tight. (12 sts)
- Rnd 2: ch 4 (counts as dc and ch 1), *dc in next st, ch 1; rep from * 10 more times, join to 3rd ch of ch 4. (12 dc, 12 ch-1 sps)
- Rnd 3: ch 1, sc in each dc and each ch-1 sp around, join. (24 sc)
- The ch-1 sps of Rnd 2 make the ring of eyelets in the center.
Open Petals (Rnds 4-5)
- Rnd 4: ch 1, *sc in next st, ch 14, sk next 3 sts; rep from * 5 more times, join to first sc. (6 ch-14 loops)
- Rnd 5: sl st in first ch-14 loop, *(sc, hdc, 2 dc, 4 tr, ch 2, 4 tr, 2 dc, hdc, sc) in loop; rep from * in each of the remaining 5 loops, join to first sc. (6 petals, 16 sts and 1 ch-2 tip each)
- The 3 skipped sts under each loop leave an open teardrop in the middle of every petal.
Petal Outline (Rnd 6, first flower only)
- Rnd 6: working in BLO, *sc in each of the first 8 sts of the petal, (sc, ch 3, sc) in the tip ch-2 sp, sc in each of the next 8 sts, sl st between this petal and the next; rep from * 5 more times, join. Fasten off. (18 sc per petal)
- Petal positions: hold the flower RS up and turn it so the petal where Rnd 6 started points left. That is petal 1. Counting in the direction you worked, petal 2 points down and left, petal 3 down and right, petal 4 right, petal 5 up and right and petal 6 up and left.
Joining As You Go (Rnd 6 for all other flowers)
- Work Rnds 1-5 as usual. Start Rnd 6 at the petal you want to point left.
- Join stitch: at the tip of a petal that needs joining, replace the ch 3 with: ch 1, sl st in the ch-3 tip of the matching petal on the neighbor, ch 1. Then continue the round as written.
- Petal 1 joins to petal 4 of the flower on the left.
- Petal 2 joins to petal 5 of the flower below and to the left.
- Petal 3 joins to petal 6 of the flower below and to the right.
- Work a plain ch-3 tip on any petal with no neighbor yet.
Honeycomb Layout
- The flowers are set in offset rows: 14 rows, alternating 11 and 10 flowers. (147 flowers)
- Colors: number the flowers in each row from the left, and the rows from the foot. Where the flower number plus the row number is even, use cream; where it is odd, use camel.
- Row 1 (11 flowers): the first flower is worked plain. Flowers 2-11 join petal 1 to the flower on the left.
- Row 2 (10 flowers): each flower sits between two flowers of Row 1. Flower 1 joins petal 2 to Row 1 flower 1 and petal 3 to Row 1 flower 2. Flowers 2-10 also join petal 1 to the flower on the left.
- Row 3 (11 flowers): flower 1 joins only petal 3, to Row 2 flower 1. Flowers 2-10 join petal 1 to the left, petal 2 to the Row 2 flower below left and petal 3 to the Row 2 flower below right. Flower 11 joins petal 1 to the left and petal 2 to Row 2 flower 10.
- Rows 4-14: rep Rows 2 and 3 alternately, ending with a Row 2.
- The joined bedspread measures about 209 x 234 cm, with a scalloped edge of petals.
Star Fillers (make 260)
- Each filler goes in a triangular gap where three flowers meet. There are 20 gaps between each pair of rows. Each gap is bordered by 6 petal sides, 2 from each flower.
- Rnd 1: with cream, MR, ch 1, 6 sc in ring, join. (6 sts)
- Rnd 2: hold the filler in a gap. *Ch 8, sl st in the 5th sc of the petal side facing it (counting from the notch between petals), ch 8, sl st in next st of Rnd 1; rep from * 5 more times, joining to each of the 6 petal sides around the gap. Fasten off. (6 arms)
- The arms form a small star that holds the petal sides together and fills the gap with lace.
Pillow Shams (make 2)
- Front: make 11 flowers (6 cream and 5 camel, alternating) and join them in 3 offset rows of 4, 3 and 4, as for the bedspread. Add 12 star fillers in the gaps. (about 76 x 52 cm)
- Back pieces (make 2 per sham): with camel, ch 108. Row 1: hdc in 3rd ch from hook and in each ch across. (106 hdc) Rows 2-28: ch 2 (does not count as a st), turn, hdc in BLO of each st across. Fasten off. (about 76 x 31 cm, ribbed)
- Lay one back piece over the other, both RS up, so they overlap by about 10 cm and the rectangle measures 76 x 52 cm. Pin the overlap.
- Edging rnd: join camel in a corner. Working through both layers where they overlap, 3 sc in corner st, sc in next 104 sts, 3 sc in corner st, 75 sc evenly along the side, 3 sc in corner st, sc in next 104 sts, 3 sc in corner st, 75 sc evenly along the other side. Join. Fasten off. (370 sts)
Sham Assembly
- Lay a back with the overlap side down. Place a front on top, RS up, so the outer petal tips reach the edge of the back.
- Sew every petal tip that reaches the edge to the edging rnd with a few small stitches.
- Tack the center of each flower to the back with a few hidden stitches so the front doesn’t shift.
- Rep with the second sham.
Ribbed Lumbar Pillow
- Front and back (make 2): with camel, ch 44. Row 1: hdc in 3rd ch from hook and in each ch across. (42 hdc) Rows 2-45: ch 2, turn, hdc in BLO of each st across. Fasten off. (about 30 x 50 cm)
- Hold the front and back WS together. Rnd 1: join in a corner through both layers, 3 sc in each corner, sc in each st along the short sides and 70 sc evenly along each long side. Insert the cushion form before closing the last side. Join. (236 sts)
- Rnd 2: ch 1, rev sc in each st around. Join and fasten off. (236 sts)
- Make 8 pompoms about 3 cm across in camel and sew 4 evenly along each short end.
Finishing
Weave in all ends, hiding the cream and camel tails inside the petal outlines of their own color so they can’t show through the open teardrops.
Wet block the bedspread on a large flat surface. Pin out each petal so its teardrop opens, and pin the star fillers so their arms lie straight. Let it dry completely before moving it. A cream or camel sheet underneath makes the lace look warm and even.
Tips for Success
- Make Rnds 1-5 of many flowers first, then join them all with Rnd 6. You can make flowers anywhere and do the joining at home.
- Keep the ch-14 loops in Rnd 4 the same length on every petal, so all the teardrops match.
- Mark petal 1 on each flower before Rnd 6, so you always know which petals to join.
- Lay out the flowers in each row with their colors before joining, and check the mix from a distance.
- Add the star fillers after each pair of rows is joined, rather than all at the end, so the work stays flat and manageable.
Common Mistakes to Avoid
- Petals with no teardrop. If you work Rnd 5 into the skipped sts instead of around the chain loop, the opening disappears. Always work into the loop.
- A flat outline. Rnd 6 must be worked in the BLO, or the raised edge around each petal is lost.
- Joining the wrong petal. Joining petal 3 to the flower below left instead of below right twists the flower and the rows drift. Count from petal 1 before each join.
- Fillers that pull. If a filler distorts the petals around it, its arms are too short. Make them ch 9 instead of ch 8.
- Colors in stripes. If you lose track of the color rule, stripes appear. Use the flower and row numbers to choose the color for each one.
Ways to Customize This Pattern
- Use white and sage, or blush and gray, for a different two-tone look.
- Make all the flowers in one color and the fillers in a contrasting shade.
- Change the size: each flower adds 19 cm in width, and each extra row adds about 16.5 cm in length.
- Make a round table topper from 7 flowers: one in the center and six around it, with six fillers.
- Use single flowers as coasters, doilies or appliques on a plain cushion.
Frequently asked questions
In a honeycomb layout, each flower has six neighbors. With six petals, every petal points straight at one neighbor, so all the tips join neatly without twisting the flowers.
The flowers hold together at their tips, but the fillers keep the petal sides from flapping and make the bedspread lie flat. You can leave them out for a lighter, more open throw.
Yes. Work Rnd 6 plain on every flower, lay them out and sew the matching petal tips together, then add the fillers. Joining as you go is faster and gives neater joins.
Wash it on a gentle cold cycle inside a large laundry bag, or by hand, and dry it flat. Pin out the petals while damp so the teardrops stay open. Wash a test flower of each color first, since camel can bleed onto cream.
The finished Cream and Camel Flower Motif Bedspread Crochet Pattern