Cream Lace Flower Crochet Bedspread Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Cream Lace Flower Crochet Bedspread Pattern
This crochet flower bedspread pattern builds an airy cream throw from 20 mesh blocks, each framed in dark green and topped with a burgundy flower, a yellow center and four green leaves. Small purple flowers sit where four blocks meet, and a scalloped cream edge hangs over the sides and foot of the bed, just like the bedspread in the photo.
It is an advanced pattern because of the volume and the finishing. The blocks are simple double crochet mesh, but you will make 20 blocks, 20 flowers, 20 centers, 12 small flowers and 80 leaves, then sew every piece on by hand, join the blocks with neat green seams and work a scalloped edge of about 140 shells. Plan on 55 to 65 hours in total, with about 20 of them spent on the flowers and leaves.
It suits crocheters who are comfortable with mesh, small shaped pieces and careful sewing, and who want a classic, romantic bedspread for a bed with warm wood and white linen. The finished cover is about 148 x 183 cm, and you can resize it by adding or removing whole blocks.
Materials
- Worsted cotton yarn, cream (C) about 1.9 kg, estimated
- Worsted cotton yarn, dark green (G) about 800 g, estimated, border rounds, seams and leaves
- Worsted cotton yarn, burgundy (B) about 150 g, estimated
- Worsted cotton yarn, purple (P) about 40 g, estimated
- Worsted cotton yarn, golden yellow (Y) about 40 g, estimated
- Crochet hook 4.5 mm
- Yarn needle
- Stitch markers and pins for placing the flowers and for joining
- Flat surface for blocking and layout
Abbreviations
MRmagic ringchchainscsingle crochetinc2 sc in the same stitchhdchalf double crochetdcdouble crochetsl stslip stitchspspacest(s)stitch(es). Each dc and each ch-1 sp in the mesh counts as one stitch.RSright sideFOfasten offCcream yarnGdark green yarnBburgundy yarnPpurple yarnYgolden yellow yarn( )xrepeat the stitches in brackets the number of times givenMesh Block (make 20, flat, C)
- Foundation: with C, ch 42.
- Row 1 (RS): sc in the 2nd ch from the hook and in each ch across (41). Ch 3 and turn. The ch 3 counts as the first dc of the next row.
- Row 2: (ch 1, skip 1 st, dc in the next st)x20 (21 dc, 20 ch-1 sps, 41 sts). Ch 3 and turn.
- Rows 3-22: (ch 1, skip the next ch-1 sp, dc in the next dc)x20, working the last dc in the top of the turning ch of the row below (21 dc, 20 sps, 41 sts). Ch 3 and turn at the end of every row except row 22. After row 22, ch 1 and turn.
- Row 23: sc in each dc and each ch-1 sp across, including the top of the turning ch (41). Do not FO.
- Check your block: the dc should stack in straight columns with the spaces above each other, there should be 21 dc and 20 spaces in every mesh row, and the block should be about as wide as it is tall, roughly 29 cm each way before the border. The center is stitch 21 of row 12.
Block Border
- Round 1 (C): ch 1, work 3 sc in the first stitch of row 23 (the corner). Sc in each of the next 39 sts across the top, then work 3 sc in the last st. Work 39 sc evenly down the side: 2 sc in each of 18 row ends and 1 sc in each of the other 3 row ends. Work 3 sc in the first st of the foundation edge, 39 sc along the foundation edge and 3 sc in the last st. Work 39 sc up the other side in the same way. Join with a sl st to the first sc (168).
- Round 2 (C): ch 1, sc in each st around, working 3 sc in the middle st of each 3-sc corner group. Join with a sl st (176) and FO C.
- Round 3 (G): join G in the middle st of any corner group. Ch 1, sc in each st around, working 3 sc in the middle st of each corner group. Join with a sl st, FO and weave in the ends (184).
- Each side now has 43 stitches between the corner groups. Count them before you move on.
- Block each block flat with a damp cloth and pin it to the same size as your test block. Let it dry fully.
Flower (make 20, B)
- Round 1: 8 sc in MR (8)
- Round 2: inc x8 (16)
- Round 3: (1 sc, inc)x8 (24). Join with a sl st to the first sc.
- Round 4 (petals): (sl st in the next st, 4 dc in the next st)x12 (12 petals, 24 sts used). Join with a sl st, FO leaving a tail of about 30 cm.
- Count your petals. There must be 12, all the same size. The flower should be about 9 cm across. Press it flat with a damp cloth.
Flower Center (make 20, Y)
- Round 1: 6 sc in MR (6)
- Round 2: inc x6 (12). Join with a sl st, FO leaving a tail of about 20 cm.
- Sew the center onto the middle of the flower, over rounds 1 and 2, with small stitches around its edge. The center should be about 3.5 cm across.
Small Flower (make 12, P and Y)
- Round 1: 5 sc in MR (5)
- Round 2: inc x5 (10). Join with a sl st.
- Round 3 (petals): (sl st in the next st, 3 dc in the next st)x5 (5 petals, 10 sts used). Join with a sl st, FO leaving a tail of about 20 cm.
- With Y, make a French knot in the center and secure it on the back. The small flower should be about 5 cm across.
Leaf (make 80, G)
- Ch 11. Starting in the 2nd ch from the hook: sl st, sc, hdc, 4 dc, hdc, sc, sl st (10 sts).
- FO leaving a tail of about 15 cm for sewing. Press each leaf flat with a damp cloth.
- Optional: with a darker green, embroider a line of sl st down the middle of each leaf, from the base to the tip, for a center vein like the photo.
Placing the Flowers and Leaves
- Lay a blocked block flat with the RS facing you. Number the stitches 1 to 41 from the right edge and the rows 1 to 23 from the bottom. Place every piece by its center.
- Flower: center on stitch 21, row 12.
- Leaves: pin 4 leaves per block, with their bases tucked under the flower petals and the tips pointing away from the center at about 45 degrees. The leaf centers sit on stitch 10 and row 17 (upper left), stitch 32 and row 17 (upper right), stitch 10 and row 7 (lower left) and stitch 32 and row 7 (lower right).
- Step back and check that the blocks on a few squares look the same before you sew anything.
- Sew the leaves on first, with small stitches along their base and the first 2 cm of each side. Leave the tips loose so they lift slightly.
- Sew the flower on last, with small stitches around the whole base of the petals and through the mesh, which also hides the base of the leaves. Weave all tails along the back of the block for at least 5 cm.
Bedspread Layout
- Lay out 4 blocks across and 5 blocks down (20 blocks in all).
- Turn every block the same way, so the leaves point the same way on every block. Check from a few steps back that the flowers line up in straight rows and columns before you start joining.
Joining
- Join the blocks into 5 rows of 4. Hold two blocks with wrong sides together and sc through the back loops of both, using G. Match the stitches one for one along each side, from the middle stitch of one corner group to the middle stitch of the next (45 stitches including both corners). The green seam will look like the green lines in the photo.
- Join the 5 rows to each other in the same way, matching the corners so the seams make a clean cross.
- Work the horizontal seams last so the vertical and horizontal seams meet flat at each corner.
- Sew a small flower on each of the 12 crossings where four blocks meet, with the center of the flower over the crossing point. Weave in all ends.
Scalloped Edge (C)
- Round 1: join C in any outer corner. Ch 1 and sc evenly around the bedspread, working 3 sc in each outer corner, one sc in each stitch along the edges and one sc in each seam where two blocks meet. Join with a sl st. Count the stitches on each side. The top and foot have about 196 and the sides about 245.
- Round 2: ch 1, sc in each st around, working 3 sc in the middle st of each corner. Join with a sl st.
- Round 3 (scallops): ch 1, sl st in the first st, *skip 2 sts, 5 dc in the next st, skip 2 sts, sl st in the next st*, and repeat around. Each scallop uses 6 stitches, so there are about 32 across the top and foot and about 40 down each side. Adjust by working a few extra sc or a dec in round 2 so each side divides by 6.
- Join with a sl st, FO and weave in the end.
- Check your scallops: they should lie flat without ruffling, with one scallop on every corner.
Finishing
Weave in all ends along the back, following the stitches for at least 8 cm. Block the bedspread by laying it flat on towels, pinning the corners and the tip of every second scallop, and misting it with water. Keep the pins away from the flowers and leaves so you do not flatten them. Let it dry fully before moving it.
Check each flower for loose stitches and secure any petal that lifts too far. Drape the bedspread with the head under the pillows and the scalloped edge hanging over the foot and sides, and it will look like the photo.
Tips for Success
- Make one test block with its flower and leaves before you commit to all 20, and write down your hook size and measurements.
- Count the stitches at the end of every five rows of each block. There should always be 21 dc and 20 spaces, or the seams will not line up.
- Make the flowers and leaves in batches of ten, one type at a time, so every piece in a batch comes out the same size.
- Use a thinner thread in the same color to sew on each piece, so the stitches sink into the mesh and stay hidden.
- Block the blocks before you sew the flowers on. Mesh curls at the edges, and unblocked blocks will not join flat.
Common Mistakes to Avoid
- Working the dc into the ch-1 space instead of the dc below fills in the mesh. Skip the space and put the dc on the dc.
- Counting the turning chain as an extra stitch makes the rows 42 stitches wide. The ch 3 stands in for the first dc, and there are always 21 dc.
- Making more or fewer than 12 petals leaves a gap or crowds the flower. Count the 24 stitches of round 3 before you start the petals.
- Sewing the leaves flat against the mesh hides their shape. Leave the tips loose.
- Working different corner counts in the border makes the blocks unequal. Use exactly 3 sc in each corner stitch on every round.
Ways to Customize This Pattern
- Swap burgundy for red, rust or dusty pink, and keep the cream and green for a different palette.
- Mix burgundy, red and purple flowers across the blocks for the garden look in the photo.
- Make a baby blanket with 3 blocks across and 3 down (9 blocks), about 105 x 105 cm with the edge.
- Make matching pillow covers by sewing one finished block to a plain cream back, with a button closure.
- Make the bedspread larger by adding one more column or one more row of blocks (about 35 cm each), and recalculate the scallops so each side divides by 6.
Frequently asked questions
The amounts above are estimates of about 2.9 kg in all. Weigh your test block with its flower and leaves, multiply by 20, and add about 10 percent for the joining and the scalloped edge. Cream makes up about two thirds of the total.
Yes. A cotton thread or fingering weight with a smaller hook gives a finer, lacier bedspread, but the blocks will be smaller, so you will need more of them. Swatch first and divide the size you want by your block size.
Yes. Each flower and leaf is a separate piece, so it needs stitching to stay in place. Sewing also lets you adjust the position of every flower on the mesh.
With a washable cotton, wash it by hand or on a gentle cycle in cool water, press out the water without wringing, and lay it flat to dry. Burgundy and green can bleed onto the cream, so wash it with a color catcher the first time, and check that the flowers are sewn on securely before every wash.
The finished Cream Lace Flower Crochet Bedspread Pattern