Daisy Vine Filet Table Runner Crochet Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Daisy Vine Filet Table Runner Crochet Pattern
This crochet daisy table runner pattern keeps its center simple, an open filet mesh rectangle in plain cream, and puts all the visual richness into a dense floral border running around all four sides. Roughly 30 white daisies with yellow centers, dozens of small pink berry clusters, and a continuous winding vine of green leaves crowd the border so densely that almost no plain mesh shows at the edges, while the center stays calm and open.
What makes this design distinctive is the sheer density of the border relative to the plain center: rather than a light trim, this is a genuinely full floral frame built from 3 separately made motifs, daisies, berry clusters, and leaves, all tacked onto a winding vine that runs the entire perimeter. That vine gives the border real structure, so daisies and berries read as growing from a continuous stem rather than scattered randomly. Expect to spend 24-28 hours total, with the vast majority of that time in the border’s motifs rather than the mesh center.
This is an advanced pattern, best suited to someone comfortable maintaining a long filet mesh panel and confident hand-arranging a large number of small motifs along a continuous vine, rather than someone wanting a lightly trimmed piece.
Materials
- DK weight cotton yarn, cream ~200g, mesh center and edging
- DK weight yarn, white ~50g, daisy petals
- DK weight yarn, golden yellow ~15g, daisy centers
- DK weight yarn, dusty pink ~30g, berry clusters
- DK weight yarn, sage green ~70g, vine and leaves
- Crochet hook 3.25 mm (US D/3)
- Tapestry/yarn needle
- Steam iron and pressing cloth, or blocking mat and pins
- Straight pins, for positioning the border before sewing
- Sharp scissors
Abbreviations
chchainsl stslip stitchscsingle crochethdchalf double crochetdcdouble crochetMRmagic ringch-spchain spacest(s)stitch(es)reprepeatFOfasten offFilet Mesh Center Panel
- With cream, ch 71. Row 1: dc in 6th ch from hook, *ch 1, skip 1 ch, dc in next ch; rep from * across. 22 mesh squares.
- Row 2: ch 4 (counts as dc + ch-1), turn, dc in next dc, *ch 1, dc in next dc; rep from * across, ending dc in top of turning ch. 22 squares maintained.
- Rep Row 2 until the panel measures approximately 105 cm long, keeping the 22-square width consistent throughout.
- FO after the final row, leaving a long tail for the edging join.
Solid Edging Band
- With cream, join at one corner of the mesh panel. Round 1: sc evenly around the entire panel, working 3 sc in each corner st to keep the rectangle flat and square.
- Round 2: ch 2 (counts as first hdc), hdc in each st around, working 3 hdc in each corner st. Join with sl st to top of ch-2.
- Round 3: repeat Round 2 once more for a firm, solid double-thick band. Join and FO, leaving a long tail.
Daisy Motif (make approximately 30)
- With golden yellow, 8 sc in MR, inc around (16 sts), sl st to join, FO leaving a short tail. This is the flat textured center.
- With white, join in any st of the center. Round 1 (petals): *ch 4, sl st in 2nd ch from hook, sc in next 2 ch, sl st in same base st; rep from * around all 16 sts to form 16 rounded petals.
- FO leaving a short tail for attaching. Repeat for approximately 30 daisies total.
Berry Cluster (make approximately 40, in dusty pink)
- 4 sc in MR. Do not join.
- Pull the MR tail tight to close, then sl st into the first sc to close the round into a small tight bobble.
- FO leaving a short tail for attaching. Repeat for approximately 40 total, worked in small grouped clusters of 3-4 along the vine.
Leaf Motif (make approximately 40, in sage green)
- Ch 6. Starting in 2nd ch from hook: sl st, sc 1, hdc 1, 3 dc in last ch.
- Continue down the other side: hdc 1, sc 1, sl st in last ch.
- FO leaving a short tail for attaching. Repeat for approximately 40 leaves total.
Border Vine
- With sage green, chain a length matching the full perimeter of the blocked panel, approximately 320 cm, to form the vine that will wind continuously around all four sides.
- Sl st back down the entire chain for body and a smooth finished edge. FO leaving tails at both ends.
Blocking All Pieces
- Steam-block the mesh panel with its edging band flat and square, pinning the corners into precise 90-degree angles.
- Steam and pin each daisy flat, spreading its petals evenly. Let all pieces, including leaves and berry clusters, dry completely before assembly.
Attaching the Vine and Border Motifs
- Lay the blocked panel flat and pin the vine around the entire perimeter, just outside the solid edging band, curving it gently in and out along each side rather than lying perfectly straight.
- Whipstitch the vine to the edging band at intervals, using the vine’s own tails and catching several stitches through the band for a secure hold.
- Space daisies evenly around the entire vine, roughly every 8-10 cm, angling them slightly so they sit at varied heights along the border rather than in a strict single row, and pin before sewing.
- Tuck leaves and berry clusters densely around and between the daisies, overlapping generously so very little bare vine or mesh shows anywhere along the border, working all the way around the panel.
- Sew each daisy, leaf, and berry cluster down firmly, checking density and balance every few motifs from a short distance.
Finishing
Once the entire border is filled, turn the runner over and check for any motif attached at only a single point; add a second stitch anywhere that feels loose, since a dense border like this gets handled often. Weave in all remaining tails. Give the whole runner a final light steam, keeping the center mesh flat and open while gently fluffing the border so it keeps some natural texture rather than pressing completely flat.
Tips for Success
- Block the mesh panel and its solid band before attaching the border vine; a flat, square base makes even spacing around all four sides far easier.
- Make extra leaves and berry clusters beyond your estimate; a dense border like this typically uses more than you expect once you start filling gaps.
- Space daisies evenly around the entire perimeter first, then fill in leaves and berries between them, rather than working motif by motif in one direction only.
- Check the border’s density from a short distance every few motifs; up close it’s easy to leave one section sparser than the rest without noticing.
- Curve the vine gently in and out along each side rather than pinning it in a perfectly straight line, for a softer, more natural border shape.
Common Mistakes to Avoid
- Attaching border motifs directly to the open filet mesh instead of the solid band leaves weak, gappy joins. Fix: always work the solid double crochet band first and anchor the vine and motifs there.
- Spacing daisies evenly but leaving leaves and berries sparse between them looks unfinished. Fix: fill every gap between daisies generously before considering that section complete.
- Working the mesh panel with a looser tension than the edging band causes the finished rectangle to warp slightly. Fix: keep consistent tension across both sections, or block firmly to correct minor differences.
- Leaving a visible gap where the vine meets itself back at the starting point breaks the continuous border look. Fix: plan and place the final connecting section last, sizing it to fill the remaining gap.
- Underestimating leaf and berry quantity leaves visible bare stretches of vine. Fix: make extras and keep adding until no bare vine remains anywhere around the border.
Ways to Customize This Pattern
- Reduce border density for a lighter, more open trim if the full dense look feels like too much for your table.
- Swap the pink berry clusters for a different accent color to match a specific table setting.
- Widen the mesh center and shorten the runner for a more rectangular placemat version.
- Use a single flower color throughout instead of white daisies for a bolder, more colorful border.
- Scale the whole design down with a finer thread and smaller hook for a matching doily using the same border technique.
Frequently asked questions
Around 30 daisies, 40 leaves, and 40 berries covers a runner of this size densely, but exact counts vary with your gauge and how tightly you pack the border. Make extras and keep filling gaps until the border reads as full and continuous.
The open filet mesh doesn’t have enough solid fabric to anchor a whipstitched join securely. The solid double crochet band gives the vine and every motif a firm, even surface to attach to all the way around the panel.
Yes. Adjust the starting chain and number of mesh rows to change the center’s width and length, then extend the vine and add motifs around the new, larger perimeter to match.
This usually means motifs were placed in one direction without checking overall balance. Step back and look at the whole border from a distance periodically while assembling, and add extra leaves or berries wherever a section looks thinner than the rest.
The finished Daisy Vine Filet Table Runner Crochet Pattern