Skip to content
✨ FREE Pattern 🎯 Beginner Friendly ⏱️ Single-Day Project

Dusty Rose Lace Square Bedspread and Shams Crochet Pattern

⏱️ 3–4 hours
↓ Jump to Pattern
Dusty Rose Lace Square Bedspread and Shams Crochet Pattern
✨ FREEBeginner Friendly
🪝

Beginner Friendly

Perfect for those just starting their crochet journey, with clear instructions and simple techniques

⏱️

Single-Day Project

A satisfying project you can complete in a single afternoon or evening.

🎀

Handmade Gift

A beautiful keepsake — free forever. Read online or print at home.

About This Dusty Rose Lace Square Bedspread and Shams Crochet Pattern

This dusty rose lace crochet bedspread is made from 72 lace squares, each like a large open flower: a ring of eyelets at the center, four fan-shaped petals reaching out to the corners, and a soft open mesh between them. An eyelet frame and a firm edge finish every square, and a ruffled flounce falls from the edge of the bed for a romantic, vintage feel. Two Euro shams and a small accent cushion complete the set.

The petals grow round by round: single spokes, then wider-spaced spokes, then V-stitches, then shells, so each petal fans out like a real flower. Between the petals, chain loops build a light mesh. A round of chain loops and a round of graded stitches then turn the circle into a square, with the tips of the petals pointing exactly into the corners.

The set takes about 145 to 165 hours, with each square taking around an hour and a half. It suits a crocheter who is comfortable with lace rounds and keeping careful count.

Materials

  • Worsted weight cotton, dusty rose about 5,200 m (26 skeins of 100 g / 200 m)
  • 5 mm crochet hook
  • Stitch markers about 4, for the petals
  • Tapestry needle and scissors
  • Two 55 cm square Euro pillows and one 28 cm square cushion form, in pale covers that will show through the lace

Abbreviations

MRmagic ring
chchain
scsingle crochet
hdchalf double crochet
dcdouble crochet
trtreble crochet
sl stslip stitch
V(dc, ch 1, dc) in the same st or sp
shell(2 dc, ch 2, 2 dc) in the same sp
picotch 3, sl st in 3rd ch from hook
BLOback loop only
skskip
spspace
st(s)stitch(es)
rndround
reprepeat
RS / WSright side / wrong side
Before you start: Make one complete square and wet block it. It should lie flat and measure about 27 cm along each side. Lace changes a lot when blocked, so always measure after blocking. If the petals cup, go up a hook size; if the square ruffles, go down one.

Center (Rnds 1-3)

  1. Rnd 1: MR, ch 3 (counts as dc here and throughout), 15 dc in ring, join with sl st to top of ch 3. Pull the ring tight. (16 sts)
  2. Rnd 2: ch 5 (counts as dc and ch 2), *dc in next st, ch 2; rep from * 14 more times, join to 3rd ch of ch 5. (16 dc, 16 ch-2 sps)
  3. Rnd 3: sl st in first ch-2 sp, ch 3, 2 dc in same sp, 3 dc in each remaining ch-2 sp, join. (48 dc)
  4. The eyelets of Rnd 2 form a small flower in the middle of the square.

Fan Petals and Side Mesh (Rnds 4-7)

  1. Rnd 4: ch 3, [ch 1, dc in next st] 6 times, ch 2, sk next 2 sts, sc in next st, ch 2, sk next 2 sts, *dc in next st, [ch 1, dc in next st] 6 times, ch 2, sk next 2 sts, sc in next st, ch 2, sk next 2 sts; rep from * 2 more times, join to top of ch 3. (4 petals of 7 dc spokes, with an sc between petals; each quarter uses 12 sts)
  2. Place a marker in the middle (4th) spoke of each petal. These spokes point to the corners of the finished square.
  3. Rnd 5: ch 3, [ch 2, dc in next dc] 6 times, *ch 4, sc in next sc, ch 4**, dc in next dc, [ch 2, dc in next dc] 6 times; rep from * 3 more times, ending the last rep at **, join. (7 spokes in each petal, now with ch-2 between)
  4. Rnd 6: ch 4 (counts as dc and ch 1), dc in same st, [ch 2, V in next dc] 6 times, *ch 4, sc in next ch-4 sp, ch 4, sc in next ch-4 sp, ch 4**, V in next dc, [ch 2, V in next dc] 6 times; rep from * 3 more times, ending the last rep at **, join to 3rd ch of ch 4. (7 Vs in each petal, 3 ch-4 loops between petals)
  5. Rnd 7: sl st in first V sp, ch 3, (dc, ch 2, 2 dc) in same sp, [ch 1, shell in next V sp] 6 times, *ch 4, [sc in next ch-4 loop, ch 4] 3 times**, shell in next V sp, [ch 1, shell in next V sp] 6 times; rep from * 3 more times, ending the last rep at **, join. (7 shells in each petal, 4 ch-4 loops between petals)

Squaring Off (Rnds 8-9)

  1. Rnd 8: sl st across to the ch-2 sp of the 4th shell of the first petal. Ch 1, (sc, ch 5, sc) in that sp (corner), *[ch 5, sc in ch-2 sp of next shell] 3 times, [ch 5, sc in next ch-4 loop] 4 times, [ch 5, sc in ch-2 sp of next shell] 3 times, ch 5, (sc, ch 5, sc) in ch-2 sp of next shell (corner); rep from * 3 times, omitting the last corner, join. (11 ch-5 loops per side, plus a corner loop at each corner)
  2. Rnd 9: sl st in corner loop, ch 4 (counts as tr), (2 tr, ch 3, 3 tr) in same loop, *3 dc in each of next 4 loops, 3 hdc in each of next 3 loops, 3 dc in each of next 4 loops, (3 tr, ch 3, 3 tr) in corner loop; rep from * 3 times, omitting the last corner, join to top of ch 4. (39 sts per side between corner sps)
  3. The taller sts at the corners and shorter sts in the middle of each side turn the circle into a square.

Eyelet Frame (Rnds 10-11)

  1. Rnd 10: sl st to the corner sp, ch 5 (counts as dc and ch 2), dc in same sp, *dc in next st, [ch 1, sk next st, dc in next st] 19 times, (dc, ch 2, dc) in corner sp; rep from * 3 times, omitting the last corner, join to 3rd ch of ch 5. (20 dc and 19 ch-1 sps along each side, plus the corner dc)
  2. Rnd 11: sl st in corner sp, ch 1, (sc, ch 2, sc) in same sp, *sc in each dc and each ch-1 sp to next corner, (sc, ch 2, sc) in corner sp; rep from * 2 more times, sc in each remaining st and sp, join. Fasten off. (43 sc per side, 172 sc)
  3. Block the square to about 27 cm. You need 72 squares for the bedspread, 8 for the shams and 2 for the cushion.

Joining the Squares

  1. Lay out 72 squares, 8 across and 9 long.
  2. Join method: hold two squares WS together with the edges matched. Sl st through both loops of both squares in each matching st, starting and ending in the corner ch-2 sps. (45 sl st per side, including both corners) This leaves a slight ridge on the RS.
  3. Join the squares into rows of 8, then join the rows along their long edges.
  4. Where four corners meet, work through all four corner sps so no gap is left. The four petal tips meet there and form a larger star.
  5. The joined bedspread measures about 216 x 243 cm.

Ruffled Flounce

  1. Rnd 1: RS facing, join in a corner sp. Work 1 sc in each bedspread corner sp, sc in each st along the edge of every square, and 1 sc in each point where two squares meet. Join. (395 sc along each long side, 351 along each short side and 4 at the corners: 1,496 sts)
  2. Rnd 2: sl st in next st, ch 4 (counts as dc and ch 1), dc in same st, *sk next st, V in next st; rep from * around, ending with sk last st, join to 3rd ch of ch 4. (748 Vs)
  3. Rnd 3: sl st in first V sp, ch 4, dc in same sp, *ch 1, V in next V sp; rep from * around, ch 1, join. (748 Vs with ch 1 between; the edge begins to ruffle)
  4. Rnd 4: sl st in first V sp, ch 3, 4 dc in same sp, *sc in next ch-1 sp, 5 dc in next V sp; rep from * around, sc in last ch-1 sp, join. (748 shells)
  5. Rnd 5: *sl st in next sc, sc in next 2 dc, (sc, picot) in next dc, sc in next 2 dc; rep from * around, join. Fasten off. (748 picot shells)
  6. The flounce is about 7 cm deep. For a deeper flounce, rep Rnd 3 once or twice more before Rnd 4.

Euro Shams (make 2)

  1. Front: join 4 squares in 2 rows of 2. (about 54 cm square)
  2. Back pieces (make 2 per sham): ch 78. Row 1: hdc in 3rd ch from hook and in each ch across. (76 hdc) Rows 2-28: ch 2 (does not count as a st), turn, hdc in BLO of each st across. Fasten off. (about 54 x 31 cm, ribbed)
  3. Lay a front WS up. Place one back piece on top, RS up, lined up with the top edge, and the other lined up with the bottom edge, overlapping by about 8 cm in the middle. Pin all edges.
  4. Rnd 1: turn so the front faces you. Join in a corner through all layers. 3 sc in each corner sp and sc in each st of the front’s edge (1 sc in each point where squares meet), easing the back to fit. Join. (360 sts: 90 per side including corners)
  5. Rnd 2: ch 1, *sc in next st, sk next st, 5 dc in next st, sk next st; rep from * around, join. Fasten off. (90 shells)

Accent Cushion

  1. Hold 2 squares WS together with the corners matched.
  2. Rnd 1: join in a corner sp through both layers. 3 sc in each corner sp and sc in each st along the sides. Insert the cushion form before closing the last side. Join. (184 sts: 46 per side including corners)
  3. Rnd 2: ch 1, *sc in next st, sk next st, 5 dc in next st, sk next st; rep from * around, join. Fasten off. (46 shells)

Finishing

Weave in all ends along solid areas, such as the shells or the sc frame, rather than through the open mesh, where they would show.

Wet block the bedspread on a large flat surface. Pin each square straight, open the petals and mesh, and arrange the flounce into even ruffles. Let it dry completely. Lay it over a cream or pale pink sheet so the lace shows clearly.

Tips for Success

  • Mark the center spoke of each petal in Rnd 4 and move the markers up each round. They show you exactly where the corners will be.
  • Count the spokes, Vs or shells in each petal after every round: there should always be 7.
  • Keep the chain loops relaxed but even. Loops that are too tight make the square cup; too loose and it ruffles.
  • Use a mercerized cotton for crisp lace that holds its shape after washing.
  • Make the flounce last, after the bedspread is fully joined and blocked, so it hangs evenly.

Common Mistakes to Avoid

  • Working into the ch-2 sps beside the petals in Rnd 5. These are chained over; working stitches into them fills the mesh and makes the square ruffle.
  • Corners in the wrong place in Rnd 8. The corners go in the 4th (middle) shell of each petal. If a corner lands on another shell, the square comes out twisted.
  • Uneven sides in Rnd 9. Each side must have exactly 11 loops before Rnd 9; count them so each side gets 39 sts.
  • A flounce that doesn’t ruffle. If the edge only waves, add an extra Rnd 3 to increase the fullness.
  • Gaps at the four-corner points. Work the join through all four corner sps where squares meet.

Ways to Customize This Pattern

  • Make it in ivory or white for a classic heirloom bedspread, or in sage for a fresh cottage look.
  • Leave off the flounce and finish with a simple shell edge for a flatter coverlet.
  • Change the size: each square adds 27 cm. A throw of 5 by 6 squares is about 135 x 162 cm.
  • Make a tablecloth of 4 by 4 squares with a short flounce.
  • Use a single square as a doily, or four squares as a table centerpiece.

Frequently asked questions

The four petals start in Rnd 4 at evenly spaced points around the center. In Rnd 8, the corner of the square is placed in the middle shell of each petal, so the petals point straight into the corners.

No. The flounce gives the romantic, skirted look in the photo, but the bedspread works well with just a shell edge, especially on a bed with a separate valance.

Yes, on Rnd 11. Block the first few squares to check the size, then join each new square to its neighbors with a sl st in each matching st.

Wash it on a gentle cold cycle inside a large laundry bag, or by hand, and dry it flat. Re-block while damp to open the lace and reshape the ruffle.

Dusty Rose Lace Square Bedspread and Shams Crochet Pattern

The finished Dusty Rose Lace Square Bedspread and Shams Crochet Pattern

🧶
Cozy Amigurumi

All our free patterns are tested multiple times by real makers before publishing. We believe clear, beautiful patterns should be free for everyone.

Read Our Story →
🎁

Get Free Patterns in Your Inbox

New free amigurumi patterns every week — no spam, unsubscribe anytime.

🔒 No spam · Unsubscribe anytime · 100% free patterns only

Made this? Share it! 📸 Tag #CozyCrochetPatterns on Instagram or Pinterest

Want More?

More Free Patterns Coming Soon 🎀

Instant PDF delivery. All tested. All beautiful.

Browse More Free Patterns →
Stay in the Loop

Free patterns + tips every week 📬

Join 1106 crocheters — no spam, just yarny goodness.

We respect your privacy. Unsubscribe anytime. Privacy Policy