Heirloom Rosette Crochet Curtain Pattern
Advanced
For experienced crocheters who enjoy complex shaping, fine detail, and ambitious construction
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Heirloom Rosette Crochet Curtain Pattern
This crochet curtain pattern creates two narrow ivory lace panels with flower-centered squares, open lattice, and a tasseled lower edge. The warm cream cotton and repeated rosettes echo the light-filtering curtains in the reference photograph. This original interpretation uses joined square motifs to give the long panels a clear, workable structure.
Allow approximately 35–45 hours for crocheting, joining, and finishing the pair. The project suits experienced crocheters who enjoy thread work, clustered petals, precise joining, and careful blocking. Separate reinforced hanging tabs support the upper edge while the floral centers remain open enough to let daylight through.
Materials
- Size 10 mercerized crochet cotton in warm ivory Approximately 1,800–2,200 m for both panels; buy the same dye lot
- 1.75 mm crochet hook Adjust to obtain blocked motif gauge
- Tapestry needle and small scissors For joining and securing thread ends
- Rustproof pins, blocking mats, and measuring tape For consistent square dimensions
- Smooth card, 8 cm tall For winding tassels
- Curtain rod up to 20 mm diameter Use with the finished hanging tabs
Abbreviations
chchainsl stslip stitchscsingle crochetdcdouble crochettrtreble crochetst / stsstitch / stitchessp / spsspace / spacesRSright side4-tr clusterWork four incomplete trebles into the indicated space, leaving the final loop of each on the hook; yarn over and draw through all five loopsGauge, Size, and Construction
- Use US crochet terminology throughout. Starting chains do not count as stitches unless explicitly stated. Work motif rounds with the RS facing throughout.
- Blocked gauge: one six-round rosette square measures 12 × 12 cm. As a secondary check, 24 sc should measure approximately 10 cm in a flat swatch; motif dimensions control the curtain size.
- Make 32 identical motifs. Each panel contains 16 motifs arranged two across and eight down, giving a joined body approximately 24 × 96 cm before edging.
- One edging round brings each body to approximately 25 × 97 cm. Folded tabs add approximately 4 cm above the upper edge, and tassels extend approximately 8 cm below the lower edge: approximately 25 × 109 cm overall.
- The construction includes 32 floral squares, 10 separate reinforced tabs, and 10 separate tassels. No stuffing, eyes, facial details, or color changes are used for this ivory curtain design.
Rosette Squares — Make 32
- Foundation: Ch 6; sl st in the first ch to form a ring.
- Round 1: Ch 1, work 12 sc into the ring; sl st in the first sc. Count: 12 sc.
- Round 2: Ch 3, counting as the first dc; ch 1. Work (dc in the next sc, ch 1) 11 times; sl st in the top of the beginning ch-3. Count: 12 dc and 12 ch-1 sps.
- Round 3: Sl st into the first ch-1 sp. Ch 1, work a 4-tr cluster in that sp, ch 3; work (4-tr cluster in the next ch-1 sp, ch 3) 11 times. Sl st in the top of the first cluster. Count: 12 petals and 12 ch-3 sps.
- Round 4: Sl st into the first ch-3 sp; ch 3, counting as the first dc, then work (2 dc, ch 2, 3 dc) in that sp. Ch 1, work 3 dc in the next ch-3 sp; ch 1, work 3 dc in the next ch-3 sp; ch 1. Repeat [(3 dc, ch 2, 3 dc) in the next ch-3 sp, ch 1, 3 dc in the next ch-3 sp, ch 1, 3 dc in the next ch-3 sp, ch 1] three times. Sl st in the top of the beginning ch-3. Count: 48 dc, 12 ch-1 sps, and four ch-2 corners. Each side has 12 dc and three ch-1 sps between corner spaces.
- Round 5: Sl st across the next two dc and into the corner sp. Ch 3, counting as the first dc, then (2 dc, ch 2, 3 dc) in that corner. Along the following side, work (ch 1, 3 dc in the next ch-1 sp) three times, then ch 1. Repeat [(3 dc, ch 2, 3 dc) in the next corner, (ch 1, 3 dc in the next ch-1 sp) three times, ch 1] three times. Sl st in the top of the beginning ch-3. Count: 60 dc, 16 ch-1 sps, and four ch-2 corners; 15 dc and four ch-1 sps per side.
- Round 6: Sl st across the next two dc and into the corner sp. Ch 3, counting as the first dc, then (2 dc, ch 2, 3 dc) in that corner. Along the following side, work (ch 1, 3 dc in the next ch-1 sp) four times, then ch 1. Repeat [(3 dc, ch 2, 3 dc) in the next corner, (ch 1, 3 dc in the next ch-1 sp) four times, ch 1] three times. Sl st in the top of the beginning ch-3. Count: 72 dc, 20 ch-1 sps, and four ch-2 corners; 18 dc and five ch-1 sps per side. Fasten off.
- Wet-block every square to 12 × 12 cm, keeping the center circular and the four sides straight. Let dry completely. Weave ends through dense dc groups, changing direction twice.
Join the Panels
- Arrange two motifs across and eight down for each panel, all RS facing up. Keep the same petal orientation throughout.
- For each seam, place two adjacent edges together with their RS facing. Using a separate length of ivory cotton, whipstitch through the corresponding outer loops of the 18 dc and through each matching ch-1 sp once. Each edge has 23 matching positions between its corner spaces.
- At both ends of each seam, make one small securing stitch through the paired corner spaces. Keep corner spaces accessible for later joins and edging. The seam should lie flat when opened.
- Join the eight horizontal pairs first. Then join the pairs into eight-row panels, matching both motif edges across each row seam. At each four-motif intersection, secure all four corner spaces together with two loose crossing stitches.
- Each panel has eight vertical motif seams and seven full-width horizontal seams, equivalent to 22 individual joined motif edges. Check that the panel lies flat before securing the final thread ends.
Continuous Panel Edging
- With RS facing, identify the 20 exposed motif sides around one panel: two at the top, eight down one side, two at the bottom, and eight up the other side.
- Join cotton in an outer panel corner space. Ch 1 and work 3 sc in that corner. Proceed around the panel in one direction.
- For every exposed motif side, work 1 sc in each of its 18 dc and 1 sc in each of its five ch-1 sps: 23 sc between corner spaces.
- At a junction between two motifs along a straight panel edge, work 1 sc through both adjacent corner spaces together. There are 16 such straight-edge junctions around each panel.
- At each remaining outer panel corner, work 3 sc in its corner space. After the final motif side, sl st in the first sc and fasten off. Count: 460 sc across motif sides, 16 sc at straight junctions, and 12 corner sc = 488 sc.
- Repeat for the second panel. Each top and bottom edge has 49 sc strictly between the center stitches of its two corner groups, or 51 sc when both corner-center stitches are included.
Reinforced Hanging Tabs — Make 10
- Foundation: Ch 7, leaving a 25 cm sewing tail.
- Row 1: Sc in the second ch from the hook and in each remaining ch; turn. Count: 6 sc.
- Rows 2–28: Ch 1, sc in each of the six sts; turn. Count: 6 sc in every row. The strip should measure approximately 2.5 × 9 cm at the stated sc gauge.
- Fasten off with a 25 cm tail. Fold the strip in half crosswise without twisting. Overlap the first and last 1 cm of the strip against opposite faces of the curtain’s upper edge, producing approximately 4 cm of rise above the panel.
- Number the top-edge stitches 1–51 from left to right, including both corner-center stitches. Center five tabs over stitches 4, 15, 26, 37, and 48. Sew both ends securely to the edging and the dense dc groups immediately below it, using two horizontal lines of backstitch per tab end.
- Repeat for the other panel. Check the folded openings against the actual rod before weaving in the sewing tails.
Lower Tassels — Make 10
- For each tassel, wind cotton around an 8 cm card 24 times. Slide a separate 30 cm cotton tie under all wraps at the upper edge and tie firmly with a double knot.
- Slide the bundle off the card and cut the lower loops. Fold the strands downward. With another 30 cm length, wrap the bundle eight times approximately 1 cm below the top and secure with a double knot. Thread both wrap ends down through the tassel.
- Trim the tassel to approximately 8 cm from its upper tie to the strand ends. Each tassel has 48 main strands before trimming.
- Number the bottom-edge stitches 1–51 from left to right, including both corner-center stitches. Attach tassels at stitches 4, 15, 26, 37, and 48. Pass one upper tie end through the edging stitch and the other around the adjacent dc group; knot together on the reverse and weave both ends through the dense stitches.
- Repeat for the second panel. Hang both panels before making the final tassel trim.
Finishing
Soak the panels in cool water with a little mild detergent, rinse, and press out moisture in a towel. Lay each curtain flat with its body measuring approximately 25 × 97 cm. Pin the side edges straight and adjust the rosettes with your fingers. Keep the tabs equal in length and comb the damp tassel strands downward. Allow everything to dry fully before hanging.
Slide the rod through the tabs and let the panels settle for a day. Cotton may lengthen slightly under its own weight. Trim stray tassel ends once the hems hang evenly, then check that every tab seam is secure.
Tips for Success
- Count all 12 petal spaces before squaring the motif. Each corner uses one space, with two side spaces between corners.
- Keep the cluster-closing loop small so each petal stays distinct when the lace is stretched.
- Block squares together in batches against the same 12 cm template to keep the long side seams straight.
- Anchor the hanging tabs into the dc groups below the border; the single edging round alone should not carry the full panel weight.
Common Mistakes to Avoid
- A rippled square often comes from extra ch-1 spaces. Check that Rounds 4, 5, and 6 have exactly three, four, and five side spaces respectively.
- Twisted seams make neighboring rosettes tilt. Match all 23 edge positions and keep the squares in the same orientation.
- Working two edging stitches at a straight motif junction adds unwanted width. Work one sc through both adjacent corner spaces together.
- Unequal tabs create a sloping hem. Measure every folded tab from the curtain edge to its upper fold before sewing the second attachment line.
Ways to Customize This Pattern
- Use pale oatmeal cotton for a slightly deeper neutral while retaining the reference’s natural lace appearance.
- For a wider panel, use three motifs across. Each additional motif column adds approximately 12 cm and requires eight more squares per panel; add tabs so their spacing remains no more than about 6 cm.
- For a shorter café curtain, use five motif rows per panel. The body will be approximately 25 × 61 cm after edging.
- Omit the tassels for a straight lower edge, reducing the overall hanging length by approximately 8 cm.
Frequently asked questions
The pair provides approximately 50 cm of flat coverage. The reference shows narrow decorative panels, and this pattern follows that proportion. For fuller coverage, add motif columns and allow extra width for gentle gathering.
Try a smaller hook and make another complete square. At 13 cm per motif, the unedged two-by-eight body would measure 26 × 104 cm, so a small gauge difference has a substantial effect on curtain length.
Yes. Omit the tabs and attach five rings at the same marked top-edge positions. Secure each ring around both the edging and an adjacent dc group. The total hanging length will depend on the rings’ drop.
Remove the rod, hand-wash gently in cool water, and support the wet fabric when lifting it. Reshape flat to the recorded body measurements. Avoid hanging the panels while wet, which can stretch the cotton and distort the tab attachments.
The finished Heirloom Rosette Crochet Curtain Pattern