Highland Tartan Crochet Bedspread Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Highland Tartan Crochet Bedspread Pattern
This crochet plaid blanket pattern creates a classic tartan in deep burgundy, forest green and cream. The horizontal stripes are worked in rows of linen stitch. The vertical stripes are added afterward with lines of surface slip stitch. Where the two cross, the colors overlap just as they do in woven tartan, so you get a true plaid rather than a grid of stripes. Chunky yarn makes the texture bold and keeps the stitch count manageable for a full-size bedspread.
The bedspread is worked in one piece. You cut the yarn at every color change and leave long tails, which are later knotted into the fringe along the sides, so there is almost nothing to weave in. The vertical lines are worked from foot to head with tails at both ends, and these also become part of the fringe. Two pillow covers repeat the same tartan on a smaller scale.
Plan on 75 to 90 hours. The rows go quickly once the linen stitch rhythm is set, while the surface lines and fringe are slower and need care. This pattern suits a crocheter who can keep track of a stripe sequence and who has the patience for neat finishing. The result looks like a traditional woven blanket, made entirely with a crochet hook.
Materials
- Bulky weight (#5) yarn, color A, burgundy about 2,900 m / 3,170 yd (roughly 25 skeins of 100 g / 120 m)
- Bulky weight (#5) yarn, color B, forest green about 1,200 m / 1,310 yd (roughly 10 skeins of 100 g / 120 m)
- Bulky weight (#5) yarn, color C, cream about 900 m / 985 yd (roughly 8 skeins of 100 g / 120 m)
- 6.5 mm (K-10.5) crochet hook
- 7 mm crochet hook for the foundation chains
- 2 pillow inserts 50 x 70 cm (20 x 28 in)
- Removable stitch markers at least 30, or a length of contrast waste yarn
- Tapestry needle
- A 15 cm (6 in) piece of cardboard for cutting fringe
- Sharp scissors
Abbreviations
A / B / Ccolor A (burgundy) / color B (green) / color C (cream)chchainsl stslip stitchsurface sl stslip stitch worked on top of finished fabric: hold the yarn behind the work, insert the hook from front to back and pull a loop up through the fabric and through the loop on the hookscsingle crochetskskipspspacest(s)stitch(es)SGstripe group: the 18-row (or 18-column) sequence of cream, burgundy and green that forms each tartan bandLinen Stitch Body
- With A and the 7 mm hook, ch 242. Change to the 6.5 mm hook.
- Row 1: Sc in 2nd ch from hook, *ch 1, sk next ch, sc in next ch* across. Turn. (121 sc and 120 ch-1 sps: 241 sts)
- Row 2: Ch 1 (does not count), sc in first sc, sc in first ch-1 sp, *ch 1, sk next sc, sc in next ch-1 sp* 119 times, sc in last sc. Turn. (122 sc and 119 ch-1 sps: 241 sts)
- Row 3: Ch 1 (does not count), sc in first sc, *ch 1, sk next sc, sc in next ch-1 sp* 119 times, ch 1, sk next sc, sc in last sc. Turn. (121 sc and 120 ch-1 sps: 241 sts)
- Repeat Rows 2 and 3 for the whole body, following the color sequence in the next section.
- Color changes: every stripe has an even number of rows, so all changes happen at the same edge. Work the last yo of the final sc with the new color. Cut the old color, leaving a 15 cm tail, and leave a 15 cm tail of the new color too. These tails become part of the fringe.
Horizontal Stripe Sequence
- Rows 1-20: A.
- Stripe group (SG), 18 rows: 2 rows C, 2 rows A, 4 rows B, 2 rows C, 4 rows B, 2 rows A, 2 rows C.
- Work the SG, then 30 rows A. Repeat this 48-row sequence 5 times in total.
- Work the SG once more, then finish with 20 rows A. (298 rows in total)
- Fasten off, leaving a 15 cm tail. The body should measure about 201 x 229 cm (79 x 90 in).
Vertical Surface Lines
- Lay the body flat with the right side up and the foundation edge toward you. Count stitch columns from the right edge and mark the stripe groups. Columns 1-16 are plain A, with no lines. The first SG covers columns 17-34. Then alternate 30 plain columns and an 18-column SG: SGs at columns 65-82, 113-130, 161-178 and 209-226. Columns 227-241 are plain.
- Within each 18-column SG, add lines as follows: 2 lines in C (columns 1-2), no lines for 2 columns, 4 lines in B (columns 5-8), 2 lines in C (columns 9-10), 4 lines in B (columns 11-14), no lines for 2 columns, 2 lines in C (columns 17-18). The 2-column gaps stay burgundy, matching the 2 A rows in the horizontal SG.
- To work a line, leave a 25 cm tail below the foundation edge. Holding the yarn behind the work, work 1 surface sl st in each row up the marked column, keeping the line straight and the loops relaxed.
- At the top edge, pull the yarn through to the front and cut it, leaving a 25 cm tail. Every line must start at the foundation edge and end at the top, so the V shapes all point the same way.
- Every 20 rows, lay the work flat and check that the line is no shorter than the fabric. If it pulls, rip back and loosen your tension. (70 lines in total: 30 in C and 40 in B)
Fringe
- Wind each color around the 15 cm cardboard and cut along one edge to make 30 cm strands.
- Long sides: fold 2 strands in half and knot them through every second row end with a lark’s head knot, using the color of that row. Where a row has color-change tails, include them in the nearest knot.
- Short sides: knot 2 strands through every second st of the foundation and last rows. On each surface line, include the line’s two tails in the knot at that column, matching the line color.
- Lay the bedspread flat, comb the fringe straight, and trim it to an even 12 cm (4.75 in).
Pillow Front (make 2)
- With A and the 7 mm hook, ch 86. Change to the 6.5 mm hook.
- Row 1: Work as Body Row 1. (43 sc and 42 ch-1 sps: 85 sts)
- Row 2: Ch 1, sc in first sc, sc in first ch-1 sp, *ch 1, sk next sc, sc in next ch-1 sp* 41 times, sc in last sc. Turn.
- Row 3: Ch 1, sc in first sc, *ch 1, sk next sc, sc in next ch-1 sp* 41 times, ch 1, sk next sc, sc in last sc. Turn.
- Repeat Rows 2 and 3 in this color sequence: 7 rows A, 18-row SG, 15 rows A, 18-row SG, 7 rows A. (65 rows) Weave in the color-change tails, because there is no fringe on the pillows.
- Work vertical lines as for the bedspread: columns 1-15 plain, SG at columns 16-33, columns 34-52 plain, SG at columns 53-70, columns 71-85 plain. Weave in the line tails on the wrong side.
Pillow Back (make 2)
- With A and the 7 mm hook, ch 86. Change to the 6.5 mm hook.
- Work Body Rows 1-3, then repeat Rows 2 and 3 until you have 65 rows, all in A.
- Fasten off and weave in ends. The back should match the front at about 70 x 50 cm (28 x 20 in).
Pillow Assembly (make 2)
- Hold one front and one back with wrong sides together and edges matched.
- With A, join yarn at a corner through both layers. Ch 1, then sc through both layers along three sides: 1 sc in each st along the top and bottom edges, 1 sc in each row end along the sides, and 3 sc in each corner.
- Slide the insert in through the open side.
- Sc the fourth side closed, keeping the insert away from your hook. Sl st to the first sc, fasten off, and hide the tail inside the cover.
Finishing
Lay the bedspread flat and check that every vertical line runs straight from edge to edge and that the stripe groups line up with the horizontal bands. Mist the fabric lightly and smooth it into a true rectangle, pulling gently along any line that drew in. Let it dry flat before using it.
Wash the bedspread by hand or on a gentle cycle in a large machine, with the fringe gathered loosely in a few loose ties so it does not tangle. Dry it flat, then comb the fringe out again. Wash a scrap of all three colors together before you start, to make sure the burgundy and green do not bleed into the cream.
Tips for Success
- Mark all the line columns before working any surface lines. A strand of waste yarn threaded up each column is easier to follow than markers on a piece this size.
- Work every line in the same direction, from the foundation edge to the top. Lines worked the other way have V shapes pointing the opposite way, and the difference is easy to see.
- Wind small balls of B and C for the surface lines. Each line needs about 12 m of yarn plus tails, and small balls pass through the fabric much more easily than full skeins.
- Keep a written row tally beside you. With 298 rows and many color changes, losing your place in the sequence is the easiest mistake to make.
- Cut all fringe strands for one side before knotting. Cutting as you go makes the lengths drift and leaves a ragged edge to trim.
Common Mistakes to Avoid
- Puckered vertical stripes: the surface slip stitches are too tight. Use a larger hook for the lines and lay the fabric flat every 20 rows to check.
- Lines that wander between columns: you lost the column as you worked. Thread waste yarn up each column first, and work directly beside it.
- A body that narrows: you are missing the last sc at the row ends. Always finish the row in the last sc, never in the turning chain.
- Plaid bands that do not match in width: your gauge is not close to square. If your rows are much shorter than your stitches are wide, add or remove rows in each stripe to compensate.
- Fringe that pulls out: a strand was knotted through a single loop. Knot through a full stitch or row end every time.
Ways to Customize This Pattern
- Change the palette to navy, green and gold for a Black Watch look, or grey, red and white for a softer winter plaid.
- Make a throw: ch 162 and work 2 full repeats plus the ends, for about 135 x 145 cm.
- Skip the fringe and work 2 rounds of sc and a round of crab stitch in A instead. Weave in all the tails before you start the border.
- Simplify the stripe group to a single wide green band with one cream line, for a quicker and bolder plaid.
- Make a matching scarf from 31 sts, following the same sequences on a narrow scale.
Frequently asked questions
Working vertical stripes into each row would mean carrying several colors across every row, which makes the fabric stiff and the back messy. Surface lines give clean, straight vertical stripes, and they overlap the horizontal bands the way real tartan does.
About 10 minutes per line once you know the rhythm, so roughly 12 hours for all 70 lines. Work a few lines at a time between rows of a smaller project to keep the job from feeling endless.
Yes, but you will then need to weave in every color-change tail and every line tail. That is several hundred ends. The fringe is designed to use those tails, which is why it saves so much finishing time.
It tangles less if you gather it into a few loose ties before washing. Comb it out with your fingers while it is still damp, and trim any strands that have shrunk unevenly.
The finished Highland Tartan Crochet Bedspread Pattern