Skip to content
✨ FREE Pattern 🎯 Beginner Friendly ⏱️ Single-Day Project

Lavender Irish Rose Filet Bedspread and Shams Crochet Pattern

⏱️ 3–4 hours
↓ Jump to Pattern
Lavender Irish Rose Filet Bedspread and Shams Crochet Pattern
✨ FREEBeginner Friendly
🪝

Beginner Friendly

Perfect for those just starting their crochet journey, with clear instructions and simple techniques

⏱️

Single-Day Project

A satisfying project you can complete in a single afternoon or evening.

🎀

Handmade Gift

A beautiful keepsake — free forever. Read online or print at home.

About This Lavender Irish Rose Filet Bedspread and Shams Crochet Pattern

This Irish rose filet crochet bedspread combines two classic lace traditions. Each of the 56 lavender squares has a filet mesh center with a layered Irish rose in deep purple and a stem with four green leaves stitched into the mesh. A frame of double crochet, a mesh round and a round of shells surround the center, and each corner opens into a lacy sunburst with four purple petals. Two Euro shams and a white cushion with a bobble trim complete the set.

The Irish rose is worked in rounds, with each new layer of petals growing from chain loops anchored behind the layer before. That gives the rose three tiers of petals that stand up from the mesh like a real bloom. The leaves are cross-stitched into the open filet squares, and the frame rounds are worked straight around the panel, ending in a picot edge that joins each square to its neighbors.

The set takes about 160 to 180 hours, with each square taking around two and a half hours. It suits a crocheter who is comfortable with filet crochet, working behind stitches and simple embroidery.

Materials

  • Worsted weight cotton blend, lavender about 4,200 m (21 skeins of 100 g / 200 m)
  • Worsted weight cotton blend, deep purple about 700 m (4 skeins)
  • Worsted weight cotton blend, forest green about 400 m (2 skeins)
  • Worsted weight cotton blend, white about 400 m (2 skeins), for the cushion
  • 5 mm crochet hook
  • Blunt tapestry needle, stitch markers and scissors
  • Two 60 cm square Euro pillows and one 30 x 45 cm cushion form

Abbreviations

MRmagic ring
chchain
scsingle crochet
hdchalf double crochet
dcdouble crochet
trtreble crochet
sl stslip stitch
picotch 3, sl st in 3rd ch from hook
bobble(yarn over, insert hook in st, pull up a loop, yarn over, pull through 2 loops) 4 times in the same st, yarn over, pull through all 5 loops
Xone cross stitch worked over one open mesh square
lazy daisyembroidered petal: bring the needle up, go back down in the same hole leaving a loop, come up at the tip inside the loop and make a tiny stitch over it
BLOback loop only
skskip
spspace
st(s)stitch(es)
rndround
reprepeat
RS / WSright side / wrong side
Before you start: Make the filet center first and block it: it should be about 21 x 21 cm. Then finish one whole square and block it to about 30 cm. When a step says to work around the back of a stitch, fold the petals forward and insert the hook from the back, around the post of that stitch.

Filet Center

  1. With lavender, ch 50.
  2. Row 1 (RS): dc in 8th ch from hook, *ch 2, sk next 2 ch, dc in next ch; rep from * 13 more times. (15 open spaces)
  3. Rows 2-15: ch 5 (counts as dc and ch 2), turn, dc in next dc, [ch 2, dc in next dc] 13 times, ch 2, dc in 3rd ch of turning ch. (15 open spaces)
  4. Don’t fasten off. The panel is a grid of 15 x 15 open squares.

Leaf Chart (15 x 15)

  1. Key: G green, . leave open. Each letter is one mesh square. Chart Row 1 is the top of the panel (crochet Row 15).
  2. Rows 1-7: ............... (the rose covers rows 2-7)
  3. Row 8: .......G.......
  4. Row 9: ..GGG..G..GGG..
  5. Row 10: .GGGG..G..GGGG.
  6. Row 11: ..GGGGGGGGGGG..
  7. Row 12: .......G.......
  8. Row 13: ...GG..G..GG...
  9. Row 14: ....GGGGGGG....
  10. Row 15: ...............
  11. The chart makes a stem with two large leaves above and two small leaves below. (41 green squares)

Layered Irish Rose (make 64)

  1. Rnd 1: with deep purple, MR, ch 5 (counts as dc and ch 2), *dc in ring, ch 2; rep from * 3 more times, join to 3rd ch of ch 5. Pull the ring tight. (5 dc, 5 ch-2 sps)
  2. Rnd 2: sl st in first ch-2 sp, *(sc, hdc, 3 dc, hdc, sc) in sp; rep from * in each remaining sp, join. (5 petals)
  3. Rnd 3: working behind the petals, *ch 4, sc around the back of the next dc of Rnd 1; rep from * 4 more times. (5 ch-4 loops)
  4. Rnd 4: *(sc, hdc, 5 dc, hdc, sc) in next ch-4 loop; rep from * 4 more times, join. (5 petals)
  5. Rnd 5: working behind the petals, *ch 5, sc around the back of the next sc of Rnd 3; rep from * 4 more times. (5 ch-5 loops)
  6. Rnd 6: *(sc, hdc, 7 dc, hdc, sc) in next ch-5 loop; rep from * 4 more times, join. Fasten off leaving a 50 cm tail. (5 petals; the rose is about 9 cm across)

Assembling the Center

  1. Leaves: with green held double, work one X over each charted square, from corner to corner of the open mesh square. Work all the half stitches of a row first, then cross them in the same direction.
  2. Rose: sew the rose over chart rows 2-7, centered across the panel, with the top of the stem tucked under its lower petals. Sew around the back of the outer petals through the mesh.
  3. Weave the embroidery tails under the backs of their own stitches.

Frame Rounds (Rnds 1-2)

  1. Rnd 1: continuing with lavender, ch 3 (counts as dc here and throughout) and work along all four sides of the panel: 45 dc along each side (3 dc in each open sp or row end) and (3 dc, ch 3, 3 dc) in each corner. Join. (51 dc per side between corner sps)
  2. Rnd 2: sl st to the next corner sp, ch 3, (dc, ch 3, 2 dc) in same sp, *dc in next st, [ch 1, sk next st, dc in next st] 25 times, (2 dc, ch 3, 2 dc) in corner sp; rep from * 3 times, omitting the last corner, join. (26 dc and 25 ch-1 sps along each side, plus the corner groups)
  3. Place a marker in each corner sp.

Shells and Corner Flowers (Rnd 3)

  1. Rnd 3: sl st to the next corner sp, ch 4 (counts as tr), [ch 3, tr] 4 times in same sp, *sk next 3 dc, sc in next ch-1 sp, [3 dc in next ch-1 sp, sc in next ch-1 sp] 12 times, sk next 3 dc, (tr, [ch 3, tr] 4 times) in corner sp; rep from * 3 times, omitting the last corner, join to top of ch 4. (a sunburst of 5 tr in each corner and 12 shells along each side)
  2. Corner flowers: with deep purple, embroider 4 lazy daisy petals in each corner sunburst, one in each ch-3 sp, radiating out from the corner.

Picot Edge (Rnd 4, first square only)

  1. Rnd 4: with lavender, sl st in first ch-3 sp of a corner sunburst, ch 1, *(2 sc, picot, 2 sc) in each of the 4 ch-3 sps of the sunburst, [sl st in next sc, sc in next dc, (sc, picot, sc) in next dc, sc in next dc] 12 times, sl st in next sc; rep from * 3 more times, join. Fasten off.
  2. Each side has 12 shell picots, and each corner has 4 picots. The square measures about 30 cm.

Joining As You Go (Rnd 4 for all other squares)

  1. Work the square through Rnd 3 and the corner flowers.
  2. Join stitch: on a side that touches a square already in place, replace each picot with: ch 1, sl st in the matching picot of the neighbor, ch 1.
  3. Join all 12 shell picots on that side, plus the corner picot nearest each end of the side (the first or last picot of the corner sunburst). The two middle corner picots stay free and leave a small lacy opening where four squares meet.
  4. Turn every square so the rose faces the head of the bed before joining.

Bedspread Layout

  1. The bedspread is 7 squares across and 8 squares long. (56 squares)
  2. Row 1: the first square is worked plain. Squares 2-7 join one side to the square on the left.
  3. Rows 2-8: the first square in each row joins only its lower side to the square below. Squares 2-7 join their left side and their lower side.
  4. The joined bedspread measures about 210 x 240 cm, with a scalloped picot edge all around.

Euro Shams (make 2)

  1. Front: join 4 squares in 2 rows of 2, as for the bedspread. (about 60 cm square)
  2. Back pieces (make 2 per sham): with lavender, ch 86. Row 1: hdc in 3rd ch from hook and in each ch across. (84 hdc) Rows 2-30: ch 2 (does not count as a st), turn, hdc in BLO of each st across. Fasten off. (about 60 x 33 cm, ribbed)
  3. Lay one back piece over the other, both RS up, so they overlap by about 6 cm and the rectangle measures 60 cm square. Pin the overlap.
  4. Edging rnd: join lavender in a corner. Working through both layers where they overlap, 3 sc in corner st, sc in next 82 sts, 3 sc in corner st, 84 sc evenly along the side, 3 sc in corner st, sc in next 82 sts, 3 sc in corner st, 84 sc evenly along the other side. Join. Fasten off. (344 sts)

Sham Assembly

  1. Lay a back with the overlap side down. Place a front on top, RS up, so the outer picots reach the edge of the back.
  2. Sew every outer picot to the edging rnd with a few small stitches.
  3. Tack the center of each rose to the back with a few hidden stitches.
  4. Rep with the second sham.

Bobble-Trim Cushion

  1. Front and back (make 2): with white, ch 72. Row 1: sc in 2nd ch from hook, *ch 1, sk next ch, sc in next ch; rep from * across. (71 sts) Row 2: ch 1, turn, sc in first sc, sc in next ch-1 sp, *ch 1, sk next sc, sc in next ch-1 sp; rep from * to last sc, sc in last sc. (71 sts) Row 3: ch 1, turn, sc in first sc, *ch 1, sk next sc, sc in next ch-1 sp; rep from * to last 2 sc, ch 1, sk next sc, sc in last sc. (71 sts) Rows 4-60: rep Rows 2 and 3, ending with a Row 2. Fasten off. (about 45 x 30 cm)
  2. Hold the front and back WS together. Rnd 1: join white in a corner through both layers, 3 sc in each corner, 69 sc along each long side and 48 sc evenly along each short side. Insert the cushion form before closing the last side. Join. (246 sts)
  3. Rnd 2: ch 1, *sc in next 2 sts, bobble in next st; rep from * around, join. Fasten off. (82 bobbles)

Finishing

Weave in all ends along solid areas, such as the dc frame or the shells, rather than in the open mesh. Make sure each rose is sewn down all around so it can’t flip up.

Wet block the bedspread on a large flat surface, pinning each square straight, opening the mesh and corner sunbursts and pinning out every picot. Let it dry completely, then lift the petals of each rose with your fingers so the three layers stand up.

Tips for Success

  • Make all the roses in one batch. Working behind the petals becomes quick once you’ve made a few.
  • Stitch the leaves on all the filet centers in one session, so they look the same on every square.
  • Count the open spaces at the end of every filet row. A missing space shifts the leaf chart.
  • Use the green yarn doubled so each X fills its mesh square.
  • Block each square before joining. Filet lace changes size a lot when blocked.

Common Mistakes to Avoid

  • Petal layers in front of each other. The loops in Rnds 3 and 5 of the rose must be anchored behind the previous petals, or the new petals cover the old ones.
  • An extra space in a filet row. The ch 5 at the start of each row counts as the first dc and ch-2 sp. Adding another dc makes the row one space wider.
  • Shells that don’t fit. Each side of Rnd 2 must have exactly 25 ch-1 sps for the 12 shells of Rnd 3.
  • Corner sunbursts that cup. Work the tr spokes loosely, or use a half-size larger hook for Rnd 3.
  • Joining the wrong corner picots. Join only the first and last picot of each corner sunburst; joining all four pulls the corners into a point.

Ways to Customize This Pattern

  • Make the roses in two shades, with the inner layer in a lighter purple and the outer layers deeper.
  • Use red roses on ivory, or pink roses on white, for a more traditional bedspread.
  • Change the size: each square adds 30 cm. A throw of 4 by 5 squares is about 120 x 150 cm.
  • Make a single square into a cushion top or framed wall decoration.
  • Leave out the corner flowers for a simpler all-lavender lace frame.

Frequently asked questions

Irish crochet roses are built in layers, with each new round of petals worked into chain loops behind the last. That gives the rose its raised, many-tiered look, unlike a flat flower or a rolled strip.

Yes, as green blocks, but carrying a second color through filet mesh is fiddly. Cross-stitching the leaves afterward is easier and gives fuller, slightly raised leaves.

Yes. Work Rnd 4 plain on every square, lay them out and sew the matching picots together. Joining as you go is faster and gives neater seams.

Wash it on a gentle cold cycle inside a large laundry bag, or by hand, and dry it flat. Re-block while damp to open the mesh and lift the roses. Wash a test square first so the purple doesn’t bleed onto the lavender.

Lavender Irish Rose Filet Bedspread and Shams Crochet Pattern

The finished Lavender Irish Rose Filet Bedspread and Shams Crochet Pattern

🧶
Cozy Amigurumi

All our free patterns are tested multiple times by real makers before publishing. We believe clear, beautiful patterns should be free for everyone.

Read Our Story →
🎁

Get Free Patterns in Your Inbox

New free amigurumi patterns every week — no spam, unsubscribe anytime.

🔒 No spam · Unsubscribe anytime · 100% free patterns only

Made this? Share it! 📸 Tag #CozyCrochetPatterns on Instagram or Pinterest

Want More?

More Free Patterns Coming Soon 🎀

Instant PDF delivery. All tested. All beautiful.

Browse More Free Patterns →
Stay in the Loop

Free patterns + tips every week 📬

Join 1106 crocheters — no spam, just yarny goodness.

We respect your privacy. Unsubscribe anytime. Privacy Policy