Skip to content
✨ FREE Pattern 🎯 Beginner Friendly ⏱️ Single-Day Project

Lavender Lotus Flower Crochet Blanket

⏱️ 3–4 hours
↓ Jump to Pattern
Lavender Lotus Flower Crochet Blanket
✨ FREEBeginner Friendly
🪝

Beginner Friendly

Perfect for those just starting their crochet journey, with clear instructions and simple techniques

⏱️

Single-Day Project

A satisfying project you can complete in a single afternoon or evening.

🎀

Handmade Gift

A beautiful keepsake — free forever. Read online or print at home.

About This Lavender Lotus Flower Crochet Blanket

This lotus flower crochet blanket pattern covers a bed in 80 lavender squares, each with its own three-dimensional lotus blooming at the center. Every square is a dense, textured base worked in single crochet with a ring of popcorn stitches, and the flower is made separately from two layers of curling petals and a raised center disc, then sewn on. Joined with raised seams, the squares read like a garden of blossoms seen from above.

The flowers are the star, and they are simpler than they look. Every petal is the same small oval shape, worked in two rounds, and the layers build up the lotus. The squares themselves use only single crochet and popcorn stitches. The challenge is patience: this is a long project, so the pattern is written so you can make squares and flowers in batches and put them together at the end.

Plan on about two hours per finished square, so roughly 150 to 170 hours for the full bed size, or about 60 hours for a throw. It suits crocheters who are comfortable with single crochet in the round, popcorn stitches and basic sewing, and who want a statement piece. The pattern also includes matching pillow covers.

Materials

  • Bulky (weight 5-6) yarn in lavender about 4,300 m (4,700 yd) for the bed-size blanket with border
  • Extra yarn for two pillow covers about 700 m (770 yd)
  • 6 mm (US J-10) crochet hook
  • Large-eye tapestry needle for sewing on the flowers and seaming
  • 4 stitch markers one per corner
  • Blocking mats and rustproof pins
  • Two 40 cm (16 in) pillow inserts optional, for the pillow covers

Abbreviations

MRmagic ring
chchain
scsingle crochet
dcdouble crochet
sl stslip stitch
st(s)stitch(es)
incincrease: 2 sc in the same st
cnrcorner: 3 sc in the same st
pcpopcorn: 4 dc in the same st, drop the loop, insert hook in the first dc, pull the dropped loop through. Counts as 1 st.
BLOback loop only
4 scsc in each of the next 4 sts (same idea for any number)
Before you start: make one complete square with its flower, block it, and measure it before you commit to 80. The square should measure 20 cm (8 in) across after Round 14 and the flower should be about 13 cm (5 in) wide. If the square comes out smaller or larger, change hook size by half a size.

Square Base (make 80 for the bed size)

The square is worked from the center out, counterclockwise, as a continuous spiral with no joining and no turning. Place a marker in the center sc of each cnr and move it up each round. Every round has 4 corners, and the stitch count in brackets is the total for the round. Work the popcorn rounds (11 and 13) with the right side facing you so the popcorns pop forward.

  1. Rd 1: 4 sc in MR. Pull the tail to close the ring tightly. Do not join. (4)
  2. Rd 2: cnr in each st. (12)
  3. Rd 3: 1 sc, cnr, 2 sc, cnr, 2 sc, cnr, 2 sc, cnr, 1 sc. (20)
  4. Rd 4: 1 sc, cnr, 4 sc, cnr, 4 sc, cnr, 4 sc, cnr, 3 sc. (28)
  5. Rd 5: 1 sc, cnr, 6 sc, cnr, 6 sc, cnr, 6 sc, cnr, 5 sc. (36)
  6. Rd 6: 1 sc, cnr, 8 sc, cnr, 8 sc, cnr, 8 sc, cnr, 7 sc. (44)
  7. Rd 7: 1 sc, cnr, 10 sc, cnr, 10 sc, cnr, 10 sc, cnr, 9 sc. (52)
  8. Rd 8: 1 sc, cnr, 12 sc, cnr, 12 sc, cnr, 12 sc, cnr, 11 sc. (60)
  9. Rd 9: 1 sc, cnr, 14 sc, cnr, 14 sc, cnr, 14 sc, cnr, 13 sc. (68)
  10. Rd 10: 1 sc, cnr, 16 sc, cnr, 16 sc, cnr, 16 sc, cnr, 15 sc. (76)
  11. Rd 11 (popcorn round): 1 sc, cnr, [2 sc, pc] 6 times, cnr, [2 sc, pc] 6 times, cnr, [2 sc, pc] 6 times, cnr, [2 sc, pc] 5 times, 2 sc. (84)
  12. Rd 12: 1 sc, cnr, 20 sc, cnr, 20 sc, cnr, 20 sc, cnr, 19 sc. (92)
  13. Rd 13 (popcorn round): 1 sc, cnr, [sc, pc, sc] 7 times, 1 sc, cnr, [sc, pc, sc] 7 times, 1 sc, cnr, [sc, pc, sc] 7 times, 1 sc, cnr, [sc, pc, sc] 7 times. (100)
  14. Rd 14: 1 sc, cnr, 24 sc, cnr, 24 sc, cnr, 24 sc, cnr, 23 sc. (108) Sl st in the next st and fasten off. Weave in all ends. The square measures 20 cm (8 in) after blocking.

Lotus Flower (make 1 for each square)

The flower has a raised center disc, 8 inner petals and 8 outer petals. Each petal is worked in rounds around a foundation chain, so it has a pointed tip and a narrow base. Leave a 25 cm tail on every piece for sewing.

  1. Center disc, Rd 1: 6 sc in MR. (6)
  2. Center disc, Rd 2: inc in each st around. (12)
  3. Center disc, Rd 3: [1 sc, inc] 6 times. (18)
  4. Center disc, Rd 4: BLO, sc in each st around. Sl st in the next st and fasten off, leaving a 25 cm tail. (18)
  5. Outer petal (make 8), Rd 1: Ch 4. Sc in the 2nd ch from hook and the next ch (2 sc), 3 sc in the last ch, then 2 sc down the other side of the foundation chain. Do not join. (7)
  6. Outer petal, Rd 2: 2 sc, inc, 3 sc in the next st, inc, 2 sc. Sl st in the next st and fasten off, leaving a 25 cm tail at the base. (11)
  7. Inner petal (make 8), Rd 1: Ch 3. Sc in the 2nd ch from hook (1 sc), 3 sc in the last ch, then 1 sc down the other side of the foundation chain. Do not join. (5)
  8. Inner petal, Rd 2: 1 sc, inc, 3 sc in the next st, inc, 1 sc. Sl st in the next st and fasten off, leaving a 25 cm tail at the base. (9)

Assembling the Flower on the Square

  1. Block the square and the petals before you sew anything. Pin each petal flat and let it dry so the edges curl neatly.
  2. Find the center of the square (the MR) and mark it with a pin. Place the 8 outer petals around it like the points of a star, tips pointing out, with the bases about 1.5 cm from the center and equal spaces between the petals. Sew each base down with its tail, then tack the lower 1 cm of each petal edge so the tip stays free.
  3. Place the 8 inner petals in the gaps between the outer petals, bases at the center and tips pointing out. Sew them down the same way, overlapping the outer petal bases slightly.
  4. Sew the center disc over the petal bases at the middle, stitching all the way around its edge so it sits raised and hides the petal ends.
  5. Gently curl the petal tips outward with your fingers.

Layout and Sizing

  1. Turn every square the same way, with the petals fanning out evenly, so the flowers line up across the blanket.
  2. Sizes: throw, 5 squares across by 6 down (30 squares), about 100 x 120 cm. Twin, 6 across by 9 down (54 squares), about 120 x 180 cm. Full or double, 8 across by 10 down (80 squares), about 160 x 200 cm. The border adds about 6 cm in each direction.
  3. Lay out all the squares on the floor and take a photo before you join anything.

Joining the Squares

  1. Join the squares into rows first, then join the rows to each other.
  2. Place two squares with wrong sides together and edges touching. Join yarn at one corner and slip stitch through the outer loops of both squares, working one sl st in each pair of sts. The seam ridge forms on the side facing you, so keep the right side toward you.
  3. Match the corners first, then ease the 24 sts between the corners.
  4. Where four squares meet, work the sl sts across the join in a plus shape so there is no gap at the center.

Border

  1. Rd 1: Join yarn at any outer corner of the blanket. Work 3 sc in the corner, then 1 sc in each st along the edge and 1 sc in each seam, with 3 sc in every remaining outer corner. Join with a sl st to the first sc.
  2. Rd 2: Ch 1, sc in each st around with 3 sc in each outer corner. Join with a sl st.
  3. Rd 3: Repeat Rd 2. Fasten off and weave in the end.

Matching Pillow Cover (make 2)

  1. Make 8 base squares for each cover and 4 lotus flowers. Sew a flower on each of 4 squares.
  2. Join the 4 flower squares into a 2 x 2 front panel using the sl st seam. Join the 4 plain squares into the back panel the same way. Each panel measures about 40 cm (16 in) square.
  3. With wrong sides together, seam the panels along three sides using sl st.
  4. Insert the 40 cm pillow and close the fourth side with whip stitch, or sew on snaps if you want to remove the insert for washing.

Finishing

Weave in every end before blocking, as each square and petal has a few and they are easiest to hide while the pieces are small. Block the finished blanket flat, following your yarn’s care label: wet-block wool, and steam acrylic by holding the iron above the fabric without pressing. Be careful not to flatten the flowers. The blanket is thick and heavy, so wash it gently and dry it flat to keep the popcorns and petals full.

Tips for Success

  • Make the squares and flowers in batches of ten, block them together, and sew the flowers on in front of the television. It keeps the project from feeling endless.
  • Keep your tension firm. The dense fabric supports the heavy flower and gives the popcorns something to stand against.
  • Pin the petals in position before you sew. A quick photo of your pinned layout helps you copy it exactly on the next square.
  • Pull each popcorn tight when you close it so it stays round and does not flatten into the fabric.
  • Weigh your first finished square and flower, then multiply by your square count to check you have enough yarn before you begin the rest.

Common Mistakes to Avoid

  • Counting a popcorn as more than one stitch throws the round off. A popcorn is one st, so check the bracketed total after every popcorn round.
  • Sewing the petals down flat kills the 3D effect. Stitch only the base and the lower edge, and let the tips lift.
  • Sewing the flower on before blocking the square can leave the square puckered. Always block the square first.
  • Skipping a corner increase turns the square into a rounded blob. Always work 3 sc in each marked corner stitch.
  • Using a hook that is too large leaves the fabric loose, and the flower sags. Drop down half a size so it stays dense.

Ways to Customize This Pattern

  • Make the petals in a lighter shade of lavender for a two-tone flower, with the center disc in the deeper shade.
  • Try another color family, such as dusty rose, sage or deep teal, in a single color so the texture takes center stage.
  • Make a 3-layer lotus by adding a third ring of 8 petals, each worked from a 5-chain foundation, under the outer layer.
  • Make a throw or baby blanket using the smaller sizes in the Layout and Sizing section.
  • Skip the flowers on alternate squares for a lighter, quicker blanket that still shows off the textured base.

Frequently asked questions

Yes. Every base square and every flower is made exactly the same way. Only the pillow backs differ, because they are left plain.

Yes. Worsted yarn and a 4 mm hook make a much lighter blanket, but you will need about 18 rounds per square and smaller petals. Make a test square and measure it before you start the rest.

The petals are firmly stitched and fairly sturdy, but wash the blanket on a gentle cycle inside a pillowcase or by hand, and dry it flat. Avoid the dryer, which can flatten the popcorns and fray the petal edges.

About two hours including the flower and sewing, a little longer for the first few. The base takes about an hour, the flower about 50 minutes and the sewing about 10 minutes.

Lavender Lotus Flower Crochet Blanket

The finished Lavender Lotus Flower Crochet Blanket

🧶
Cozy Amigurumi

All our free patterns are tested multiple times by real makers before publishing. We believe clear, beautiful patterns should be free for everyone.

Read Our Story →
🎁

Get Free Patterns in Your Inbox

New free amigurumi patterns every week — no spam, unsubscribe anytime.

🔒 No spam · Unsubscribe anytime · 100% free patterns only

Made this? Share it! 📸 Tag #CozyCrochetPatterns on Instagram or Pinterest

Want More?

More Free Patterns Coming Soon 🎀

Instant PDF delivery. All tested. All beautiful.

Browse More Free Patterns →
Stay in the Loop

Free patterns + tips every week 📬

Join 1106 crocheters — no spam, just yarny goodness.

We respect your privacy. Unsubscribe anytime. Privacy Policy