Skip to content
✨ FREE Pattern 🎯 Beginner Friendly ⏱️ Single-Day Project

Layered Pink Flower Bedspread and Pillow Topper Crochet Pattern

⏱️ 3–4 hours
↓ Jump to Pattern
🐰
✨ FREEBeginner Friendly
🪝

Beginner Friendly

Perfect for those just starting their crochet journey, with clear instructions and simple techniques

⏱️

Single-Day Project

A satisfying project you can complete in a single afternoon or evening.

🎀

Handmade Gift

A beautiful keepsake — free forever. Read online or print at home.

About This Layered Pink Flower Bedspread and Pillow Topper Crochet Pattern

This pink flower granny square bedspread is covered with 168 layered roses, each sitting on a ring of pointed green leaves inside a small square. The flowers have three tiers of petals, from a deep rose center to softer pink outer petals, so they stand up from the bed like a garden in full bloom. Light pink joins frame every square, a scalloped border finishes the edge, and a strip of the same flowers dresses up a plain white pillow.

The square is worked in one piece from the center out. Each petal layer is made in chain loops that sit behind the previous layer, anchored around the back of earlier stitches, which is what makes the petals stack and lift. A round of green leaves follows the same method, and then two rounds turn the circle into a square. There is no sewing on the flowers at all.

The full bedspread takes about 170 to 200 hours. Each square takes just under an hour and is very portable. It suits a crocheter who is comfortable working around the back of stitches and keeping track of several color changes.

Materials

  • Worsted weight cotton blend, deep rose about 700 m (4 skeins of 100 g / 200 m)
  • Worsted weight cotton blend, pink about 1,800 m (9 skeins)
  • Worsted weight cotton blend, sage green about 2,000 m (10 skeins)
  • Worsted weight cotton blend, pale pink about 700 m (4 skeins)
  • 5 mm crochet hook
  • Stitch markers a few
  • Tapestry needle and scissors
  • White pillowcase for the pillow topper

Abbreviations

MRmagic ring
chchain
scsingle crochet
hdchalf double crochet
dcdouble crochet
trtreble crochet
sl stslip stitch
BLOback loop only
skskip
spspace
st(s)stitch(es)
rndround
reprepeat
RS / WSright side / wrong side
Before you start: Make one complete square and block it. It should measure about 17 cm along each side. The bedspread is 12 by 14 squares, so a small difference adds up fast. Change hook size until your square matches. When a step says to work around the back of a stitch, fold the petals forward toward you and insert the hook from the back, around the post of that stitch.

Flower Center and First Petals (Rnds 1-3)

  1. Rnd 1: with deep rose, MR, ch 1, 8 sc in ring, join with sl st to first sc. Pull the ring tight. (8 sts)
  2. Rnd 2: ch 1, *sc in next st, ch 3; rep from * 7 more times, join to first sc. (8 sc, 8 ch-3 loops)
  3. Rnd 3: sl st in first ch-3 loop, *(sc, hdc, 3 dc, hdc, sc) in loop; rep from * in each of the remaining 7 loops, join. Fasten off deep rose. (8 petals, 7 sts each)

Second and Third Petal Layers (Rnds 4-7)

  1. Rnd 4: working behind the petals, join pink with sc around the back of any sc of Rnd 2, *ch 5, sc around the back of the next sc of Rnd 2; rep from * 6 more times, ch 5, join to first sc. (8 ch-5 loops)
  2. Rnd 5: sl st in first ch-5 loop, *(sc, hdc, 5 dc, hdc, sc) in loop; rep from * in each of the remaining 7 loops, join. (8 petals, 9 sts each)
  3. Rnd 6: working behind the petals, *ch 7, sc around the back of the next sc of Rnd 4; rep from * 7 more times, ending in the first sc. (8 ch-7 loops)
  4. Rnd 7: sl st in first ch-7 loop, *(sc, hdc, 7 dc, hdc, sc) in loop; rep from * in each of the remaining 7 loops, join. Fasten off pink. (8 petals, 11 sts each)
  5. Push each layer of petals forward with your fingers so the flower stands up in three tiers.

Leaf Round (Rnds 8-9)

  1. Rnd 8: working behind the petals, join sage green with sc around the back of any sc of Rnd 6, *ch 8, sc around the back of the next sc of Rnd 6; rep from * 6 more times, ch 8, join to first sc. (8 ch-8 loops)
  2. Rnd 9: sl st in first ch-8 loop, *(sc, hdc, 2 dc, tr, ch 2, tr, 2 dc, hdc, sc) in loop; rep from * in each of the remaining 7 loops, join. (8 pointed leaves, 10 sts and 1 ch-2 tip each)
  3. The leaves sit behind the third petal layer, with their pointed tips showing all around the flower.

Squaring Up (Rnds 10-12)

  1. Rnd 10: sl st in next 5 sts and into the ch-2 tip of the first leaf. Ch 1, sc in same sp, *ch 6, sc in ch-2 tip of next leaf; rep from * 6 more times, ch 6, join to first sc. (8 ch-6 loops)
  2. Rnd 11: sl st in first ch-6 loop, ch 3 (counts as dc), (3 dc, ch 2, 4 dc) in same loop, 7 dc in next loop, *(4 dc, ch 2, 4 dc) in next loop, 7 dc in next loop; rep from * 2 more times, join to top of ch 3. Fasten off green. (15 dc per side, 60 dc, 4 corner ch-2 sps)
  3. Rnd 12: join pale pink in any corner sp, ch 1, (sc, ch 2, sc) in same sp, *sc in each st to next corner, (sc, ch 2, sc) in corner sp; rep from * 2 more times, sc in each remaining st, join. Fasten off. (17 sc per side, 68 sc)
  4. The square measures about 17 cm. Make 168.

Joining the Squares

  1. Lay out 168 squares, 12 across and 14 long.
  2. Join method: place two squares side by side, RS up. With pale pink, sl st through the BLO of the matching sts of both squares, starting and ending in the corner ch-2 sps. (19 sl st per side, including both corners)
  3. Join the squares into rows of 12, then join the rows along their long edges.
  4. Where four corners meet, work through all four corner sps so no gap is left.
  5. The joined bedspread measures about 204 x 238 cm.

Scalloped Border

  1. Rnd 1: with pale pink, RS facing, join in a corner sp. Work 1 sc in each bedspread corner sp, sc in each st along the edge of every square, and 1 sc in each point where two squares meet. Join. (251 sc along each long side, 215 along each short side and 4 at the corners: 936 sts)
  2. Rnd 2: join sage green, ch 1, *sc in next st, sk next 2 sts, 7 dc in next st, sk next 2 sts; rep from * around, join. Fasten off green. (156 scallops)
  3. Rnd 3: join pale pink in any sc, *sl st in sc, [sc in next dc, ch 1] 6 times, sc in next dc; rep from * around, join. Fasten off. (156 scallops)
  4. The scallops ease naturally around the corners. Pin them into shape when blocking.

Pillow Topper

  1. Make 10 flowers, working Rnds 1-9 of the square only. Join them as you go on Rnd 9, in 2 rows of 5.
  2. Join stitch: at a leaf tip that needs joining, replace the ch 2 with: ch 1, sl st in the ch-2 tip of the facing leaf on the neighboring flower, ch 1.
  3. Join the leaf pointing at each neighbor (left, right, above or below) to that neighbor’s facing leaf. The diagonal leaves stay free.
  4. The finished strip measures about 75 x 30 cm. Center it on the front of a white pillowcase and sew it down through the leaf tips and the back of each flower.

Finishing

Weave in all ends on the WS. Hide the deep rose and pink ends behind the petal layers and the green ends behind the leaves, where they can’t be seen.

Lay the bedspread flat and steam it lightly, holding the iron above the flowers so you don’t flatten the petals. Pin the scallops and let them dry. Once dry, fluff each flower with your fingers so the three layers of petals stand up again.

Tips for Success

  • Make the squares in stages: all flower centers first, then all petal layers, then all leaves and squaring rounds. Fewer color changes means faster work and more even squares.
  • Keep the chain loops in Rnds 4, 6 and 8 snug. Loose loops make the petals droop and the square lose its shape.
  • Always fold the previous petals forward before working behind them, so you don’t catch a petal in the back loops by mistake.
  • Use a cotton blend. It keeps the petals crisp and the flowers stand up better than in soft acrylic.
  • Block every square to the same size before joining. Squares with full flowers can pull in slightly at the corners.

Common Mistakes to Avoid

  • Anchoring a loop round to the wrong stitches. Rnd 4 anchors around the sc of Rnd 2, Rnd 6 around the sc of Rnd 4 and Rnd 8 around the sc of Rnd 6. If you skip ahead, the layers won’t sit behind each other.
  • Petals that are all the same size. Each layer has more dc than the one before (3, 5 and 7), which makes the flower get bigger from the center out.
  • A wavy square. If the square ruffles, the ch-6 loops in Rnd 10 are too long. Make them firmer or go down a hook size for that round.
  • Corners in the wrong loops in Rnd 11. Corners go in every second loop. Count the loops before you start and mark the corners.
  • A ruffled border. The border only works with exactly 1 sc in each corner and at each join. Count Rnd 1 before starting the scallops.

Ways to Customize This Pattern

  • Make the flowers in a mix of colors, such as coral, peach and lilac, with the same green leaves.
  • Change the size: each square adds 17 cm. A throw of 7 by 9 squares is about 125 x 159 cm with the border.
  • Use cream for Rnds 11 and 12 instead of green and pale pink for a softer, vintage look.
  • Make a matching cushion of 3 by 3 squares for the front and a plain back.
  • Leave out the third petal layer for a quicker, flatter flower square.

Frequently asked questions

Each new layer starts with chain loops anchored around the back of stitches from two rounds earlier. Those loops sit behind the petals just made, so the next petals grow from further back and peek out around them.

Yes. Work Rnd 12 on each new square and join it to its neighbors with a sl st in each matching st. It saves a lot of time on a bedspread with 168 squares.

Cotton blend petals hold their shape well and spring back after being pressed. If they flatten over time, steam them lightly and fluff them with your fingers.

Wash it on a gentle cold cycle inside a large laundry bag, or by hand, and dry it flat. Shape the flowers and scallops while they are still damp. Wash a test square first, since deep rose can bleed into pale pink.

🧶
Cozy Amigurumi

All our free patterns are tested multiple times by real makers before publishing. We believe clear, beautiful patterns should be free for everyone.

Read Our Story →
🎁

Get Free Patterns in Your Inbox

New free amigurumi patterns every week — no spam, unsubscribe anytime.

🔒 No spam · Unsubscribe anytime · 100% free patterns only

Made this? Share it! 📸 Tag #CozyCrochetPatterns on Instagram or Pinterest

Want More?

More Free Patterns Coming Soon 🎀

Instant PDF delivery. All tested. All beautiful.

Browse More Free Patterns →
Stay in the Loop

Free patterns + tips every week 📬

Join 1106 crocheters — no spam, just yarny goodness.

We respect your privacy. Unsubscribe anytime. Privacy Policy