Mandala Lace Square Bedspread Crochet Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Mandala Lace Square Bedspread Crochet Pattern
This crochet lace bedspread pattern joins a large grid of open, lacy squares, each centered on a round filet mandala built from radiating spokes, small flower-like clusters, and delicate open mesh, into a full all-cream coverlet finished with a scalloped border. Two matching pillow shams repeat the same square motif and are finished with a distinctive ruffled edge that sets them apart from the flatter bedspread border.
What makes this design distinctive is the sheer density of lacework packed into every single square: rather than a simple granny square, each one works outward from a textured center mandala through several rounds of open mesh, small picot details, and shell stitches, so the finished piece reads as genuine heirloom lace rather than a typical granny square blanket. Working that level of detail consistently across a very large number of squares, plus a dramatically ruffled pillow trim that’s a completely different technique from the flat bedspread border, is what makes this such a demanding project. Expect to spend 55-65 hours total across the full bedspread and both pillow shams.
This is an advanced pattern, best suited to someone experienced with filet lace and mandala-style square motifs, comfortable maintaining exact consistency across a very large number of repeated squares, and confident working a dimensional ruffled trim, rather than someone wanting a simple granny square project.
Materials
- DK weight cotton yarn, cream/ivory ~1400g, squares, border, and pillow shams
- Crochet hook 3.5 mm (US E/4)
- Tapestry/yarn needle
- Pillow forms or inserts, 2 ~45 x 30 cm each
- Fabric for pillow backing (optional) ~1 m, if not crocheting a full backing
- Steam iron and pressing cloth, or a large blocking mat and pins
- Sharp scissors
Abbreviations
chchainsl stslip stitchscsingle crochethdchalf double crochetdcdouble crochettrtreble/triple crochetMRmagic ringpicotch 3, sl st in first ch of the 3ch-spchain spacest(s)stitch(es)reprepeatFOfasten offMandala Lace Square (make approximately 195 for a full/queen bedspread, plus 24 more for 2 pillow shams)
- Round 1: ch 6, sl st to form a ring. Ch 3 (counts as first dc), 23 dc into the ring. Sl st to join. (24 sts)
- Round 2: *ch 4, skip 2 sts, sl st in next st; rep from * around to form 8 ch-4 loops, building the first open spoke pattern radiating from the center.
- Round 3 (small flower clusters): in each ch-4 loop, work (sc, ch 2, 3 dc, ch 2, sc) to form 8 small flower-like shell clusters. Sl st to join.
- Round 4: working behind Round 3, join in the base st between two clusters. *ch 5, sl st in same base st; rep from * around to form 8 larger open loops.
- Round 5: in each ch-5 loop, work (sc, hdc, 3 dc, hdc, sc), beginning to widen the round shape outward toward the eventual square corners.
- Round 6 (square corners begin): join at a base point. Ch 3, (2 dc, ch 2, 3 dc) in same st, *ch 1, 3 dc in next st, ch 1, (3 dc, ch 2, 3 dc) in next corner point; rep from * around, placing 4 corner groups evenly to shape the square. Sl st to join.
- Round 7: ch 3, (2 dc, ch 2, 3 dc) in same corner sp, *ch 1, 3 dc in each ch-1 sp across the side, ch 1, (3 dc, ch 2, 3 dc) in next corner sp; rep from * around. Sl st to join, FO leaving a long tail for joining.
- Repeat this entire sequence to make approximately 195 squares for the bedspread and 24 more for the two pillow shams (12 per sham: 6 front, 6 back, or adjust based on your chosen backing method).
Join-As-You-Go Assembly, Bedspread
- Arrange squares into your planned grid (for example, 13 columns x 15 rows for a queen-size coverlet, adjusting to your own mattress measurements).
- Join squares as you complete each one’s final round, working a sl st into the corresponding corner or ch-1 sp of the neighboring square already in place, rather than sewing all squares together afterward.
- Work row by row, joining each new square to the one beside it and to the row above as you go, until the entire grid is assembled.
Bedspread Scalloped Border
- Join at any corner of the assembled bedspread. Round 1: sc evenly around the entire perimeter, working 3 sc at each of the 4 corners to keep them flat.
- Round 2: *sk 1 st, picot, sk 1 st, sc in next st; rep from * evenly around, working extra repeats at each corner for a delicate picot trim.
- Round 3 (scallop round): *sk 2 sts, 5 dc in next st, sk 2 sts, sl st in next st; rep from * evenly around all 4 sides, working extra repeats at each corner so scallops stay even in size.
- Join with sl st to first st and FO. Weave in all ends.
Pillow Sham Front (make 2, using a 2×3 grid of 6 squares each)
- Join 6 mandala squares into a 2×3 grid using the same join-as-you-go method as the bedspread, to form each pillow front panel.
Ruffled Pillow Edge (worked on both front and back panels before assembly)
- Round 1: sc evenly around the joined 2×3 panel, working 3 sc at each corner.
- Round 2: ch 3, dc in each st around, working 3 dc at each corner, to build a solid base round for the ruffle.
- Round 3 (ruffle foundation): *2 dc in next st; rep from * around, doubling the stitch count to create fullness for the ruffle.
- Round 4 (ruffle gather): *2 dc in next st; rep from * around once more, doubling the stitch count again so the trim gathers into a deep, dimensional ruffle rather than lying flat.
- FO leaving a short tail. Repeat for both front and back panels of each pillow sham.
Pillow Sham Assembly and Closure
- With the ruffled edges already worked on both front and back panels, whipstitch front and back together around 3 sides through the base of the ruffle rounds, leaving one side open to insert the pillow form.
- Add a few crocheted ties or a row of buttons along the opening to close the sham once the pillow form is inside.
Finishing
Weave in every square’s starting and ending tail individually across the entire bedspread and both pillow shams, since a project this size accumulates a very large number of loose ends. Steam-block the finished bedspread flat, pinning the scalloped and picot border open evenly on all 4 sides. Block both pillow fronts and backs before assembling the shams, gently steaming the ruffled trim to help it sit full and even rather than flattening. Insert the pillow forms once both shams are fully sewn and closed.
Tips for Success
- Keep every round of the mandala identical in stitch count and placement on every single square; even small variations become very visible once dozens of squares sit side by side.
- Join squares at the exact same corner and ch-sp points throughout the whole bedspread, so the grid lines up consistently across its full size.
- Work in batches, several squares at a time, rather than joining each one immediately after finishing it, so you can periodically check the overall grid lies flat.
- Work the ruffle rounds at a relaxed, even tension; working them too tightly prevents the fullness from gathering properly into a visible ruffle.
- Block the bedspread in sections on a large flat surface if you don’t have space to block the whole thing at once, working corner by corner.
Common Mistakes to Avoid
- Varying the mandala’s round structure between squares, even slightly, breaks the tile-like consistency this design depends on. Fix: keep a written reference of the exact round-by-round structure and check it for every square.
- Joining squares at inconsistent points causes visible misalignment across such a large grid. Fix: always join at the same designated corner and ch-sp points throughout.
- Working the ruffle rounds at too tight a tension produces a flat trim instead of a full, dimensional ruffle. Fix: keep tension relaxed through both doubling rounds so the fabric has room to gather.
- Underestimating how much yarn a project this size requires. Fix: calculate total yardage from a few finished squares and one pillow sham before buying all your yarn.
- Skipping intermediate flatness checks on a project this large means catching a drift only after dozens of rows are joined. Fix: lay the growing bedspread flat and check it every few rows rather than only at the end.
Ways to Customize This Pattern
- Reduce the grid size for a throw blanket instead of a full bedspread.
- Work the squares in a soft pastel instead of all cream for a different color story.
- Skip the ruffled trim on the pillows and use the same scalloped border as the bedspread for a more matched, less dramatic set.
- Skip the pillow shams and make only the bedspread, or make additional shams for more pillows.
- Add a fabric lining behind the full bedspread for added warmth and easier care.
Frequently asked questions
Block one square first to get its exact finished measurement, then divide your desired bedspread width and length by that measurement to calculate columns and rows, adding extra squares for overhang on the sides and foot of the bed.
Strongly recommended. Sewing together 195-plus squares after the fact would add a substantial amount of additional finishing time compared to joining each square as you complete it.
This usually means the two doubling rounds were worked at too tight a tension, which prevents the extra stitches from gathering into visible fullness. Work both rounds a little looser than your normal tension, and steam gently to help the ruffle settle into shape.
Yes. Use the same scalloped and picot border from the bedspread instead of the ruffle rounds for a simpler, more matched set that’s also faster to finish.
The finished Mandala Lace Square Bedspread Crochet Pattern