Skip to content
✨ FREE Pattern 🎯 Beginner Friendly ⏱️ Single-Day Project

Marigold Flower Crochet Bedspread Pattern

⏱️ 3–4 hours
↓ Jump to Pattern
Marigold Flower Crochet Bedspread Pattern
✨ FREEBeginner Friendly
🪝

Beginner Friendly

Perfect for those just starting their crochet journey, with clear instructions and simple techniques

⏱️

Single-Day Project

A satisfying project you can complete in a single afternoon or evening.

🎀

Handmade Gift

A beautiful keepsake — free forever. Read online or print at home.

About This Marigold Flower Crochet Bedspread Pattern

This marigold crochet bedspread pattern covers a queen bed in 288 dense, ruffled flowers, each one sewn to the center of its own square and joined into a raised grid. The flowers are worked from the outside in along a spiral of free front loops, so every bloom gets six layers of petals from a single small base. Two shades of orange give each flower a darker outer edge and a bright golden heart, which is what makes the whole bed glow the way real marigold garlands do.

This is a long project. Each flower takes about 40 minutes and each square about 25 minutes, so plan on roughly 350 to 400 hours for the bedspread and the two matching pillow covers. The good news is that it breaks down into small, portable units you can make anywhere, and the joining only starts once you have a full stack ready.

It suits crocheters who are comfortable with working in back and front loops, reading stitch counts, and keeping even tension over hundreds of repeats. If you have made a granny square blanket and a few 3D flowers, you have the skills. What this pattern asks for most is patience and a big basket.

Materials

  • Worsted weight (#4) yarn, Color A – deep marigold orange approx. 7,600 m for the bedspread (about 38 skeins of 200 m / 100 g)
  • Worsted weight (#4) yarn, Color B – saffron / golden orange approx. 1,500 m for the bedspread (about 8 skeins)
  • Extra yarn for 2 pillow covers approx. 900 m Color A and 100 m Color B
  • 4.5 mm crochet hook for squares, joining, border and pillow backs
  • 4 mm crochet hook for the flowers
  • 2 pillow inserts 45 x 45 cm
  • Tapestry needle blunt, large eye
  • Stitch markers at least 4
  • Sewing pins for centering flowers and laying out squares
  • Blocking mats and rust-proof pins for squares
  • Fiberfill optional, a small pinch per flower
  • Scissors

Abbreviations

MRmagic ring
chchain
sl stslip stitch
scsingle crochet
hdchalf double crochet
dcdouble crochet
inc2 sc in the same stitch
rev screverse single crochet (crab stitch)
BLOback loop only
FL / FLOfront loop / front loop only
st(s)stitch(es)
sp(s)space(s)
rndround
RS / WSright side / wrong side
Before you start: Make one complete unit first, a square with its flower sewn on. The square should measure 14 x 14 cm after blocking (gauge: 15 hdc and 11 rows = 10 cm with the 4.5 mm hook). Weigh that finished unit and multiply by 288 to check your yarn total, then buy all of it from a single dye lot.

Base Squares (make 288 for the bedspread)

  1. With the 4.5 mm hook and Color A, ch 22.
  2. Row 1: hdc in 3rd ch from hook and in each ch across, turn. (20 hdc)
  3. Rows 2–14: ch 2 (does not count as a st), hdc in each st across, turn. (20 hdc)
  4. Rnd 1 (border): ch 1, do not turn. Work around all four sides as follows. On the top and bottom edges, work (sc, ch 2, sc) in the first st, sc in each of the next 18 sts, and (sc, ch 2, sc) in the last st. On each row-end side, work 18 sc evenly across the 14 row ends by working 2 sc into row ends 2, 5, 9 and 12 and 1 sc into the rest. Sl st to the first sc. (80 sc, 4 corner ch-2 sps; 20 sc per side counting the corner sc)
  5. Fasten off and weave in ends.
  6. Pin each square to 14 x 14 cm, mist or lightly steam, and let it dry completely.

Marigold Flower Base (make 288)

  1. With the 4 mm hook and Color A, work in a continuous spiral. Mark the first st of each rnd.
  2. Rnd 1: 6 sc in MR. (6)
  3. Rnd 2: working in BLO, inc in each st around. (12)
  4. Rnd 3: working in BLO, (sc, inc) 6 times. (18)
  5. Rnd 4: working in BLO, (sc in next 2 sts, inc) 6 times. (24)
  6. Rnd 5: working in BLO, (sc in next 3 sts, inc) 6 times. (30)
  7. Rnd 6: working in BLO, (sc in next 4 sts, inc) 6 times. (36)
  8. Sl st in the next st to smooth the end of the spiral. Do not fasten off. The free front loops of Rnds 1–5 now form one continuous spiral ridge on the side facing you. This is the RS of the flower.

Marigold Flower Petals

  1. Petal zone 1 (Color A): working in both loops of Rnd 6, 3 dc in each st around. Sl st to the first dc. (108 dc)
  2. Petal zone 2 (Color A): fold the zone 1 petals back toward you, sl st into the nearest free FL of Rnd 5, then work 3 dc in each FL of Rnd 5. (90 dc) Change to Color B in the last yarn over of the final dc. Cut Color A, leaving a 40 cm tail for sewing.
  3. Petal zone 3 (Color B): continue spiraling inward along the free front loops, 3 hdc in each FL of Rnd 4. (72 hdc)
  4. Petal zone 4 (Color B): 3 hdc in each FL of Rnd 3. (54 hdc)
  5. Petal zone 5 (Color B): 2 hdc in each FL of Rnd 2. (24 hdc)
  6. Petal zone 6 (Color B): (sl st, ch 2, sl st) in each FL of Rnd 1. (6 picots)
  7. Fasten off Color B and weave the tail to the back of the base.
  8. Pinch and fluff the petals with your fingers so the outer two zones stand upright and the center sits in a tight golden cluster.

Attaching the Flowers

  1. Fold one blocked square in half both ways and mark the center with a pin.
  2. Center a flower over the pin. If you want a fuller dome, tuck a small pinch of fiberfill under the flower base.
  3. Thread the 40 cm Color A tail onto the tapestry needle. Lift the outer petals and whipstitch around the edge of the flower base (between Rnds 5 and 6) to the square, catching only the top layer of the square.
  4. Go around a second time with smaller stitches so the flower cannot tilt.
  5. Weave the tail into the back of the square and trim.
  6. Repeat for all 288 units.

Joining the Squares

  1. Lay the units out in a grid 16 squares wide and 18 squares long.
  2. With the 4.5 mm hook and Color A, hold two squares WS together so the seam ridge sits on the RS.
  3. Working through both loops of both layers: sc in the corner ch-2 sps, sc in each of the 20 sc along the edge, sc in the next corner ch-2 sps. (22 sc per square edge)
  4. Without fastening off, pick up the next pair of squares and continue the same seam. Join all the horizontal seams first, each one running the full width of the blanket.
  5. Join the vertical seams the same way, working one sc into each seam end as you cross a horizontal seam so the grid stays flat.
  6. Fold the flower petals back out of the way as you work each seam.

Bedspread Border

  1. Rnd 1: with RS facing, join Color A in any outer corner ch-2 sp. Ch 1, 3 sc in the corner sp. Along each edge, sc in each sc and 1 sc in each ch-2 sp on both sides of every seam. Work 3 sc in each outer corner sp. Sl st to the first sc. (350 sc on each short side and 394 sc on each long side between corners; 1,500 sc in total)
  2. Rnd 2: ch 1, sc in each st around, working 3 sc in the center st of each corner. Sl st to the first sc. (1,508 sc)
  3. Rnd 3: ch 1, rev sc in each st around. Sl st to the first st. (1,508 sts)
  4. Fasten off and weave in ends.

Pillow Covers (make 2)

  1. Front: make 9 squares with flowers attached and join them 3 x 3, exactly as for the bedspread.
  2. Front border: join Color A in any corner sp. Work 3 sc in each corner sp, then sc in each sc and in each seam ch-2 sp along the sides. (64 sc per side between corners; 268 sc in total) Fasten off.
  3. Back: with the 4.5 mm hook and Color A, ch 66. Row 1: hdc in 3rd ch from hook and in each ch across, turn. (64 hdc)
  4. Back, Rows 2–46: ch 2 (does not count as a st), hdc in each st across, turn. (64 hdc)
  5. Back border: ch 1, then sc in each of the 64 sts along the top and bottom. Along each side, work 64 sc evenly across the 46 row ends by working 2 sc into every third row end. Work 3 sc into each corner. (268 sc) Fasten off.
  6. Hold the front and back WS together and line up the corners. Join Color A at a corner and sc through both layers in each st, working 3 sc in the center st of each corner.
  7. Before you close the fourth side, insert the 45 x 45 cm pillow form, then finish the side. (276 sc)
  8. Rev sc in each st around, sl st to join, and fasten off. Weave the end into the seam.

Finishing

Once the border is on, lay the bedspread flat on a clean floor or a large bed and look over the seams. Re-sew any flower that has worked loose, and weave in any ends that are peeking through on the front. Do not steam the flowers. Heat flattens the ruffles and they will not spring back. If the grid needs straightening, mist the seam lines lightly with water and pat them flat by hand.

Go over the whole surface and fluff each flower so the outer petals stand up and the golden centers are visible. The finished piece is heavy, so always lift and fold it with both arms rather than dragging it by one edge. For washing, hand wash or use a cold gentle cycle in a large front-loading machine, then dry it flat across a few drying racks. Never hang it wet, because the weight will stretch the seams.

Tips for Success

  • Work in batches: make 20 bases, then 20 sets of petals, then 20 squares. You will settle into a rhythm and your tension will stay much more even.
  • Count the petal zones on your first five flowers (108, 90, 72, 54, 24, 6). After that, your hands will know the shape and you can stop counting.
  • Keep the 40 cm Color A tail on every flower. It saves cutting and joining new yarn 288 times when you sew them on.
  • Store finished units flat in a box with the flowers facing up. Stacking them face down in a bag crushes the ruffles.
  • Number your rows of squares with stitch markers during joining so you never lose your place in the 16 x 18 grid.

Common Mistakes to Avoid

  • Working Rnds 2–6 of the flower base through both loops. This leaves no front loops for the inner petals. If you miss the BLO instruction, frog back to Rnd 1 and restart, because there is no way to add the loops afterwards.
  • Working petals on the wrong face of the base. The free front loops are on the side that faced you while you crocheted, and the petals must go there or the flower will cup the wrong way.
  • Squares that vary in size. Even 5 mm of difference adds up across 16 squares and the seams will pucker. Block every square to 14 cm and set aside any that are clearly off.
  • Joining too tightly. Tight seams pull the bedspread into ripples. If your seams look strained, go up to a 5 mm hook for joining only.
  • Sewing flowers off-center. Always pin the exact center of the square first, or the grid of flowers will look wavy from across the room.

Ways to Customize This Pattern

  • Make a throw instead: 8 x 10 squares (80 units) gives roughly 116 x 144 cm with the border and takes about a quarter of the yarn.
  • Make a festive table runner: join 2 x 8 squares and use the same three-round border.
  • Create an ombré: use deep orange flowers at the foot of the bed and fade through saffron to pale yellow at the head.
  • Make a checkerboard: work every other square in cream and leave it without a flower, which halves the flower count and shows off the texture of the seams.
  • Get fuller coverage: work a mini flower (petal zones 3–6 only, on a 4-round base) and sew one over each point where four squares meet.

Frequently asked questions

With about 9,100 m of worsted acrylic at roughly 200 m per 100 g, the bedspread weighs around 4.5 kg. That makes it a warm bed cover, but not one to throw over yourself as a light blanket. In cotton it would be closer to 5.5 kg.

Yes, and cotton gives very crisp ruffles. The trade-off is weight and drape. A blend of acrylic and cotton is a good middle ground. Whatever fiber you choose, use the same yarn for the squares and the flowers so they shrink and relax at the same rate when washed.

Each square is 14 cm, so divide the width and length of your bed top plus drop by 14 to get the number of squares across and down. For the border, Rnd 1 is 20 sc per square plus 1 sc for each seam sp along an edge, plus 3 sc at each corner.

Working the outer petals first means you always have room to see the next set of free front loops. If you start in the center, the finished inner petals cover the loops you still need. The spiral of free front loops also lets you work every zone without breaking the yarn except at the color change.

Marigold Flower Crochet Bedspread Pattern

The finished Marigold Flower Crochet Bedspread Pattern

🧶
Cozy Amigurumi

All our free patterns are tested multiple times by real makers before publishing. We believe clear, beautiful patterns should be free for everyone.

Read Our Story →
🎁

Get Free Patterns in Your Inbox

New free amigurumi patterns every week — no spam, unsubscribe anytime.

🔒 No spam · Unsubscribe anytime · 100% free patterns only

Made this? Share it! 📸 Tag #CozyCrochetPatterns on Instagram or Pinterest

Want More?

More Free Patterns Coming Soon 🎀

Instant PDF delivery. All tested. All beautiful.

Browse More Free Patterns →
Stay in the Loop

Free patterns + tips every week 📬

Join 1106 crocheters — no spam, just yarny goodness.

We respect your privacy. Unsubscribe anytime. Privacy Policy