Peacock Feather Bedspread and Pillow Shams Crochet Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Peacock Feather Bedspread and Pillow Shams Crochet Pattern
This crochet peacock bedspread pattern is built from lacy teal squares, each with a peacock feather eye at its center: a navy pupil, a teal ring and a green teardrop pointing up. Around the eye, rounds of chain mesh spread out to the corners, and when the squares are joined, the lace between them opens into a lattice that lets the white sheet underneath show through. A deep scalloped border finishes the edge, and two lace pillow shams complete the set.
Each square is worked in rounds from the center. The teardrop shape comes from a single round that mixes short and tall stitches, so the eye is round at the bottom and pointed at the top. All the squares are joined as you go through small picots on the last round, and every feather points toward the head of the bed, so the whole bedspread reads like a spread of peacock plumes.
The set takes about 140 to 160 hours, with 102 squares in all. Each square takes a little over an hour once you know it. It suits a crocheter who is comfortable with lace mesh, color changes and keeping count across many rounds.
Materials
- DK weight cotton, teal about 3,200 m (14 skeins of 100 g / 230 m)
- DK weight cotton, emerald green about 200 m (1 skein)
- DK weight cotton, navy about 150 m (1 skein)
- 4 mm crochet hook
- Stitch markers a few, for marking the feather point
- Tapestry needle and scissors
- Two pillows 50 x 75 cm, for the shams
- Blocking mats and rust-proof pins
Abbreviations
MRmagic ringchchainscsingle crochethdchalf double crochetdcdouble crochettrtreble crochetsl stslip stitchskskipspspacest(s)stitch(es)rndroundreprepeatJAYGjoin as you goRSright sideFeather Eye (Rnds 1-4)
- Rnd 1: with navy, MR, ch 1, 8 sc in ring, join with sl st to first sc. Pull the ring tight. (8 sts)
- Rnd 2: ch 1, 2 sc in each st around, join. Fasten off navy. (16 sts)
- Rnd 3: join teal in any st, ch 1, *sc in next st, 2 sc in next st; rep from * 7 more times, join. Fasten off teal. (24 sts)
- Rnd 4: join green in any st. This st is the point of the feather. Ch 4 (counts as tr), (tr, ch 2, 2 tr) in same st, dc in next 3 sts, hdc in next 3 sts, sc in next 11 sts, hdc in next 3 sts, dc in next 3 sts, join to top of ch 4. Fasten off green. (27 sts and 1 ch-2 sp at the point)
- The eye is now a teardrop: round at the bottom and pointed at the top. Place a marker in the ch-2 sp at the point.
Squaring Up (Rnds 5-6)
- Rnd 5: join teal with sc in the ch-2 sp at the point. Ch 5, sk next 2 sts, sc in next st, ch 5, sk next st, sc in next st, ch 5, sk next 2 sts, sc in next st, [ch 5, sk next st, sc in next st] 6 times, ch 5, sk next 2 sts, sc in next st, ch 5, sk next st, sc in next st, ch 5, sk last 2 sts, join with sl st to first sc. (12 ch-5 loops)
- Number the loops 1-12, starting with the loop just to the right of the point. Loops 2, 5, 8 and 11 become the corners, so the point sits in the middle of the top side.
- Rnd 6: sl st in loop 1, ch 3 (counts as dc), 4 dc in same loop, ch 1, (3 dc, ch 3, 3 dc) in loop 2, ch 1, *[5 dc in next loop, ch 1] twice, (3 dc, ch 3, 3 dc) in next loop, ch 1; rep from * 2 more times, 5 dc in loop 12, ch 1, join to top of ch 3. (64 dc: 16 per side, with 3 ch-1 sps on each side and 4 corner ch-3 sps)
Lace Mesh (Rnds 7-10)
- Rnd 7: sl st in next 4 dc, in next ch-1 sp, in next 3 dc and in the corner ch-3 sp. Ch 1, *(sc, ch 5, sc) in corner sp, ch 5, sc in next ch-1 sp, ch 5, sc in 3rd dc of next 5-dc group, ch 5, sc in next ch-1 sp, ch 5, sc in 3rd dc of next 5-dc group, ch 5, sc in next ch-1 sp, ch 5; rep from * 3 more times, join to first sc. (6 loops per side plus 4 corner loops, 28 loops)
- Rnd 8: sl st in first 3 ch of the corner loop. Ch 1, *(sc, ch 5, sc) in corner loop, [ch 5, sc in next loop] 6 times, ch 5; rep from * 3 more times, join. (7 loops per side plus 4 corner loops, 32 loops)
- Rnd 9: sl st to the center of the corner loop and work as Rnd 8, with [ch 5, sc in next loop] 7 times on each side. (8 loops per side plus 4 corner loops, 36 loops)
- Rnd 10: as Rnd 9, with [ch 5, sc in next loop] 8 times on each side. (9 loops per side plus 4 corner loops, 40 loops)
- Don’t fasten off. Keep the teal attached for Rnd 11.
Picot Edge (Rnd 11, first motif only)
- Rnd 11: sl st in first 2 ch of the corner loop. Ch 1, *(3 sc, ch 3, 3 sc) in corner loop, (2 sc, ch 3, 2 sc) in each of the next 9 loops; rep from * 3 more times, join. (168 sc; 9 picots per side and 4 corner picots)
- Fasten off and weave in all ends.
- This round is where every other motif is joined, so only the first motif is worked plain like this.
Joining As You Go (Rnd 11 for all other motifs)
- Work Rnds 1-10 as usual. Before starting Rnd 11, turn the motif so the feather point is at the top, matching the motifs already joined.
- Join stitch: on a side that needs joining, replace each ch 3 with: ch 1, sl st in the matching ch-3 picot of the neighbor, ch 1. Then continue the round as written.
- Join all 9 side picots along each shared side, and join the corner picots at both ends of that side.
- Where a corner meets motifs that are already joined to each other, sl st into the point where their corner picots meet, so all four corners are joined at one spot.
- Work plain ch-3 picots on any side that has no neighbor yet.
Bedspread Layout
- The bedspread is 9 motifs across and 10 motifs long, with every feather pointing toward the head of the bed. (90 motifs)
- Row 1: motif 1 is worked plain. Motifs 2-9 join their left side to the right side of the motif before. (9 motifs)
- Row 2: motif 1 joins its bottom side to Row 1 motif 1. Motifs 2-9 join their bottom side to the motif below and their left side to the motif before. (9 motifs)
- Rows 3-10: rep Row 2.
- Every few rows, lay the work flat and check that all feather points face the same way.
- The joined bedspread measures about 225 x 250 cm before the border.
Scalloped Border
- Rnd 1: join teal in any edge picot. Working around the whole bedspread, work 3 sc in each side picot along the edge, 1 sc in each point where two motifs’ corner picots are joined, and 5 sc in each of the 4 bedspread corner picots. Join. (279 sc along each long side, 251 along each short side and 20 at the corners: 1,080 sts)
- Rnd 2: ch 1, *sc in next st, sk next 2 sts, 7 dc in next st, sk next 2 sts; rep from * around, join to first sc. (180 fans)
- Rnd 3: *sl st in next sc, [sc in next dc, ch 2] 6 times, sc in next dc; rep from * around, join. Fasten off. (180 lacy scallops)
- The fans fall naturally around the corners; ease them with your fingers when blocking.
Pillow Sham Fronts (make 2)
- Each sham front is 3 motifs wide and 2 motifs tall, with the feathers pointing up. (6 motifs)
- Join the motifs exactly as for the bedspread layout.
- Border Rnd 1: join teal in any edge picot. Work 3 sc in each side picot, 1 sc in each point where two motifs’ corner picots are joined, and 3 sc in each of the 4 sham corner picots. Join. (83 sc along each long side, 55 along each short side and 12 at the corners: 288 sts)
- Border Rnd 2: work as bedspread border Rnd 2. (48 fans)
- Border Rnd 3: work as bedspread border Rnd 3. Fasten off. (48 scallops)
- The front measures about 50 x 75 cm inside the scallops.
Pillow Sham Backs (make 2 sets)
- Gauge for the back: 16 hdc and 12 rows = 10 cm.
- Upper back: with teal, ch 122. Row 1: hdc in 3rd ch from hook and in each ch across. (120 hdc)
- Rows 2-36: ch 2 (does not count as a st), turn, hdc in each st across. (120 hdc)
- Last row: ch 1, turn, sc in each st across. Fasten off. (120 sc)
- Lower back: with teal, ch 122. Work Row 1 as for the upper back. (120 hdc)
- Rows 2-32: ch 2, turn, hdc in each st across. (120 hdc)
- Last row: ch 1, turn, sc in each st across. Fasten off. (120 sc)
- Lay the upper back over the lower back, both RS up, so the sc edges overlap by about 7 cm and the rectangle measures 75 x 50 cm. Pin the overlap.
- Edging rnd: join teal in a corner. Working through both layers where they overlap, 3 sc in corner st, sc in next 118 sts, 3 sc in corner st, 90 sc evenly along the side (about 3 sc for every 2 rows), 3 sc in corner st, sc in next 118 sts, 3 sc in corner st, 90 sc evenly along the other side. Join. Fasten off. (428 sts)
Sham Assembly
- Lay a sham back with the overlap side down. Place a sham front on top, RS up, so that Border Rnd 1 lines up with the edging rnd of the back and the scallops hang free beyond the edge.
- Pin all around, easing the front to fit.
- With teal and a tapestry needle, whipstitch Border Rnd 1 of the front to the edging rnd of the back.
- Tack the center of each feather eye to the back with a few hidden stitches.
- Rep with the second sham.
Finishing
Weave in all remaining ends. Hide the navy and green tails inside the eye stitches, and run teal tails along the solid dc rounds rather than through the mesh, where they would show.
Wet block the bedspread on a large flat surface. Pin out each motif so the mesh opens evenly and the corners are square, and pin every scallop of the border. Let it dry completely before moving it. Block the shams the same way, then put the pillows in through the back opening.
Tips for Success
- Make all the feather eyes first, in batches. Switching colors once per batch is much faster than changing yarn three times on every motif.
- Keep the marker in the feather point until the motif is joined. It’s easy to join a motif sideways once the mesh is around it.
- Count the loops after every mesh round. A missing loop on one side makes that side shorter, and its picots won’t line up with the neighbor.
- Use mercerized cotton for crisp lace. It holds the shape of the mesh and the feather eye much better than acrylic.
- Join the bedspread on a large table or the floor, so the finished rows lie flat while you work the next one.
Common Mistakes to Avoid
- A round eye instead of a teardrop. If Rnd 4 is worked with even stitches, the point disappears. Make sure the tr group sits at the point and the sc are at the bottom.
- Corners in the wrong loops in Rnd 6. If the point isn’t centered on the top side, recount: the corners go in loops 2, 5, 8 and 11, counting from the loop to the right of the point.
- Ruffled mesh. If the motif waves, the ch-5 loops are too loose. Go down a hook size for Rnds 7-10.
- Feathers pointing different ways. Check the orientation before every Rnd 11. A sideways feather is very noticeable on the finished bed.
- A tight border. If the edge pulls in, Rnd 1 has too few stitches. Work exactly 3 sc into every picot and 5 sc at each corner.
Ways to Customize This Pattern
- Add a ring of bronze or gold around the green teardrop for a more realistic feather eye.
- Change the size: each motif adds 25 cm. A king bed needs about 11 by 11 motifs.
- Make a table runner of 2 by 6 motifs, or a throw of 5 by 6 motifs, with the same border.
- Offset every second row by half a motif for a more scattered, plume-like layout, filling the edge gaps with plain mesh half-squares.
- Work the mesh in a darker teal and the outline round in a lighter one to make the lattice stand out.
Frequently asked questions
Rnd 4 uses different stitch heights around the circle: trebles at the top, then doubles, half doubles and singles at the bottom. The tall stitches push the top out into a point while the bottom stays round.
Yes. The mesh is open, so a solid sheet underneath shows off the lace. A white sheet makes the teal stand out most, while a dark sheet gives a richer, moodier look.
Yes. Work Rnd 11 plain on every motif, lay them out, and sew the matching picots together. Joining as you go is faster and gives neater joins, but separate motifs are easier to carry around.
Wash it on a gentle cold cycle inside a large mesh laundry bag, or by hand. Dry it flat and pin out the edges if the mesh has pulled in. Never hang it to dry, because the weight stretches the lace out of shape.
The finished Peacock Feather Bedspread and Pillow Shams Crochet Pattern