Red and White Triangle Crochet Blanket Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Red and White Triangle Crochet Blanket Pattern
This triangle crochet blanket pattern builds a crisp red and white throw from 20 squares, each made of four triangles that meet in the center. Two triangles are solid red single crochet and two are white mesh, so every square looks like a little pinwheel, and the squares tile into the zigzag of triangles shown in the photo.
It is an advanced pattern because of the shaping and the assembly. You will make 40 red triangles and 40 white mesh triangles, each increased row by row from a single stitch, then sew four of them into every square, edge the square in red and join all 20 with flat seams. Plan on 40 to 50 hours in total, about an hour and a half per square including assembly.
It suits crocheters who are comfortable with shaping, mesh and careful sewing, and who want a graphic, festive throw for a bed with white linen. The finished blanket is about 152 x 188 cm, and you can resize it by adding or removing whole squares.
Materials
- Chunky cotton-blend yarn, red (R) about 1.9 kg, estimated
- Chunky cotton-blend yarn, white (W) about 1.1 kg, estimated
- Crochet hook 6.0 mm
- Yarn needle
- Stitch markers and pins for assembling and joining
- Flat surface for blocking and layout
Abbreviations
MRmagic ringchchainscsingle crochetinc2 sc in the same stitchdcdouble crochetsl stslip stitchspspacest(s)stitch(es)FOfasten offRred yarnWwhite yarn( )xrepeat the stitches in brackets the number of times givenRed Triangle (make 40, R)
- Each row has 2 stitches more than the one before. Ch 1 and turn at the end of every row (the ch 1 does not count as a stitch).
- Foundation: ch 2.
- Row 1: sc in the 2nd ch from the hook (1)
- Row 2: 3 sc in the stitch (3)
- Row 3: inc, 1 sc, inc (5)
- Rows 4-20: inc, sc in each st to the last st, inc. Row k has 2k – 1 stitches: row 4 has 7, row 5 has 9 and so on up to row 20 with 39 stitches. Row 20 is inc, 35 sc, inc (39).
- FO leaving a tail of about 30 cm. Count your rows. There must be 20, with 39 stitches in the last one.
- The point (row 1) goes in the center of the square and the long edge (row 20) is the outside of the square.
White Mesh Triangle (make 40, W)
- Row 1: with W, ch 3 (counts as a dc), ch 1, dc in MR. Pull the ring closed (2 dc, 1 sp). Turn.
- Rows 2-10: ch 4 (counts as a dc and a ch-1 sp), dc in the top of the ch 3 of the row below (the first dc). *Ch 1, dc in the next dc*, repeating until you have worked into every dc of the row below. Then ch 1 and work 1 more dc in the same last dc. Turn.
- Each row adds 2 dc. Row k has 2k dc, so row 2 has 4, row 3 has 6, row 9 has 18 and row 10 has 20 dc and 19 spaces (39 stitches).
- Row 10 has 39 stitches, the same as the base of the red triangle. FO leaving a tail of about 30 cm.
- Check your triangle: 10 rows, with 20 dc in the last one. The point (row 1) goes in the center of the square.
Assembling the Square (make 20)
- Block all triangles flat with a damp cloth and let them dry. Lay four triangles points together: red on the left and right, white on top and bottom, with all four points meeting at the center.
- Sew the sloping sides together with mattress stitch, using R. Each red side has 20 row ends and each white side has 10, so match 2 red row ends to 1 white row end all along the seam.
- Sew the four seams from the outside toward the center, and finish by pulling the four points together tightly at the center with the tails.
- Check your square: each side is 39 stitches long, the square is about 32 cm across, and the four points meet in the middle without a hole.
Square Border (R)
- Round 1: join R in the seam at one corner of the square. Ch 1, work 3 sc in the corner seam. Sc in each of the 39 stitches along the first base. Repeat at the next corner, so (3 sc in the seam, 39 sc along the base)x4. Join with a sl st (168).
- Round 2: ch 1, sc in each st around, working 3 sc in the middle st of each 3-sc corner group. Join with a sl st, FO and weave in the ends (176).
- Each side now has 41 stitches between the corner groups. Count them before you move on.
- Block each square flat and pin it to the size of your first square. Let it dry fully.
Blanket Layout
- Lay out 4 squares across and 5 squares down (20 squares in all).
- Turn every square the same way, with the red triangles on the left and right, so the white triangles of neighboring squares meet in straight columns.
- Check from a few steps back that the triangles line up before you start joining.
Joining
- Join the squares into 5 rows of 4. Hold two squares with wrong sides together and sc through the back loops of both, using R. Match the stitches one for one along each side, from the middle stitch of one corner group to the middle stitch of the next (43 stitches including both corners).
- Join the 5 rows to each other in the same way, matching the corners so the seams make a clean cross.
- Work the horizontal seams last so the vertical and horizontal seams meet flat at each corner.
- Weave in all ends.
Blanket Edging (R)
- Round 1: join R in any outer corner. Ch 1, 3 sc in the corner stitch, then sc in each stitch along the edge, working 1 sc in each seam. At each outer corner work 3 sc in the middle stitch. Join with a sl st. This gives about 184 stitches along the top and foot and about 231 down each side (about 842 in all).
- Rounds 2-3: ch 1, sc in each st around, working 3 sc in the middle st of each corner group. Join with a sl st at the end of each round. Each round adds 8 stitches, so round 2 has about 850 and round 3 about 858.
- FO and weave in the end. Count your own stitches. The edge only needs to lie flat, so add or remove a stitch if a side ripples.
Finishing
Weave in all ends along the back, following the stitches for at least 8 cm. Block the blanket by laying it flat on towels, pinning the corners and edges to about 152 x 188 cm, and misting it with water. Let it dry fully before moving it. Blocking opens the mesh triangles and flattens the seams.
Drape the blanket with the head under the pillows and the foot hanging over the bed. The red and white triangles will line up into a zigzag, and it will look like the photo.
Tips for Success
- Make one test square before you commit to all 20, and write down your hook size and measurements.
- Count the stitches at the end of every row: 2 more than the row before on every triangle.
- Make the triangles in batches of ten, one color at a time, so every triangle in a batch comes out the same size.
- Block every triangle before sewing. Mesh curls at the edges, and unblocked triangles will not match up.
- Pin the four triangles together before you sew, and check that the center point is tight and flat.
Common Mistakes to Avoid
- Counting the ch 1 turning chain as a stitch makes the red triangle one stitch wider on every row. The ch 1 never counts.
- Forgetting the extra dc at the end of each mesh row makes the triangle lopsided. Every mesh row ends with a second dc in the last dc.
- Sewing the sloping sides one to one leaves the red side too long and the white side puckered. Match 2 red row ends to 1 white row end.
- Turning squares in different directions breaks the zigzag. Lay out the whole blanket before you join anything.
- Joining with a tight seam makes ridges across the triangles. Use a loose stitch and match the seam tension to the squares.
Ways to Customize This Pattern
- Swap red for navy, forest green or dusty rose and keep the white mesh for a different palette.
- Work the mesh triangles in a light color, such as cream or pale gray, for a softer look.
- Make a baby blanket with 3 squares across and 4 down (12 squares), about 110 x 146 cm with the edging.
- Make matching pillow covers by sewing one finished square to a plain red back, with a button closure.
- Turn alternate squares a quarter turn so the white triangles form larger diamonds across the blanket.
Frequently asked questions
The amounts above are estimates of about 3 kg in all. Weigh your test square (two red triangles, two white triangles and the border), multiply by 20, and add about 10 percent for the joining and the edging. Red makes up about two thirds of the total.
Yes. Use a larger hook for bigger triangles or a smaller hook for smaller ones, and keep the stitch counts the same. To change the proportions, add one red row and one white row together, which makes the base wider by 2 stitches on the red and 2 dc on the mesh.
Yes. The four triangles meet at one point, and sewing them gives the tightest center and the cleanest seams. Working the triangles together stitch by stitch is possible, but it is much harder to keep the mesh and the solid triangles in line.
With a washable cotton blend, wash it on a gentle cycle in cool water, press out the water without wringing, and lay it flat to dry. Red can bleed onto the white, so wash it with a color catcher the first time, and never hang a wet blanket this heavy.
The finished Red and White Triangle Crochet Blanket Pattern