Rosewater Crochet Rose Bracelet Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Rosewater Crochet Rose Bracelet Pattern
This crochet rose bracelet pattern pairs a three-layer dusty pink rose with two cream blossoms, two lavender flowers, and small green leaves, all gathered on a soft pink cord. Pearls sit around the edges of the cluster, and two slim pink drops with pearl and gold beads hang from beneath the rose.
The bracelet is adjustable without a clasp. A round crocheted Romanian cord passes through two small crocheted sleeves beside the flower cluster, so you pull the hanging tails to tighten it and slide the sleeves apart to loosen it. The rose is worked in one piece, with each new layer of petals crocheted behind the one before it, which gives it real depth.
Allow six to eight hours for the flowers, cord, beading, and assembly. It suits crocheters who are confident with fine thread and small hooks and like jewelry-scale detail. Because it adjusts, it makes an easy gift when you do not know the wearer’s wrist size.
Materials
- Size 10 crochet cotton thread in dusty pink about 20 m (rose, base panel, drops)
- Size 10 crochet cotton thread in cream about 6 m
- Size 10 crochet cotton thread in lavender about 5 m
- Size 10 crochet cotton thread in sage green about 8 m
- Size 3 crochet cotton thread in dusty pink about 12 m (cord and sleeves)
- 1.5 mm steel crochet hook for flowers, leaves, panel, drops
- 2.0 mm crochet hook for cord and sleeves
- 6 mm ivory glass pearl 1 (rose center)
- 5 mm ivory glass pearls 2 (cream flower centers)
- 4 mm ivory glass pearls 10 (around the cluster)
- 8 mm ivory glass pearls 2 (drops)
- Gold 11/0 seed beads about 50
- White 11/0 seed beads 12
- Lavender 8/0 seed beads 2
- Gold 3 mm round beads 4 (drops)
- Fine sewing needle and beading needle
- Tapestry needle for the cord and sleeves
- Clear jewelry glue for knots and cord ends
- Light fabric stiffener optional
Abbreviations
MRmagic ringchchainsl stslip stitchscsingle crochetincincrease: 2 sc in the same stitchhdchalf double crochetdcdouble crochetspspacest(s)stitch(es)Layered Rose (Dusty Pink, Make 1)
- With 1.5 mm hook and size 10 thread. Round 1: Ch 1, 10 sc in MR, pull ring closed, sl st to first sc to join. (10)
- Round 2: Ch 1, (sc in next st, ch 3, skip next st) 5 times, sl st to first sc to join. (5 sc and 5 ch-3 sps)
- Round 3 (inner petals): Sl st into the first ch-3 sp. *(Sc, hdc, 3 dc, hdc, sc) in the ch-3 sp, sl st in next sc* 5 times. (35 petal sts and 5 sl sts)
- Round 4: Fold the inner petals forward. Working behind them, sc around the post of the first sc of Round 2, ch 4; *sc around the post of the next sc of Round 2, ch 4* 4 times, sl st to first sc to join. (5 sc and 5 ch-4 sps)
- Round 5 (middle petals): Sl st into the first ch-4 sp. *(Sc, hdc, 5 dc, hdc, sc) in the ch-4 sp, sl st in next sc* 5 times. (45 petal sts and 5 sl sts)
- Round 6: Fold the middle petals forward. Working behind them, sc around the post of the first sc of Round 4, ch 5; *sc around the post of the next sc of Round 4, ch 5* 4 times, sl st to first sc to join. (5 sc and 5 ch-5 sps)
- Round 7 (outer petals): Sl st into the first ch-5 sp. *(Sc, hdc, 7 dc, hdc, sc) in the ch-5 sp, sl st in next sc* 5 times. (55 petal sts and 5 sl sts)
- Fasten off, leaving a 25 cm tail.
Cream Flowers (Make 2)
- Round 1: Ch 1, 10 sc in MR, pull ring closed, sl st to first sc to join. (10)
- Round 2: Ch 1, (sc in next st, ch 3, skip next st) 5 times, sl st to first sc to join. (5 sc and 5 ch-3 sps)
- Round 3: Sl st into the first ch-3 sp. *(Sc, hdc, 3 dc, hdc, sc) in the ch-3 sp, sl st in next sc* 5 times. (35 petal sts and 5 sl sts)
- Round 4 (edging): Ch 1. *Sc in next 3 sts, 2 sc in the center dc, sc in next 3 sts, sl st in the sl st between petals* 5 times. (40 sc and 5 sl sts)
- Fasten off, leaving a 20 cm tail.
Lavender Flowers (Make 2)
- Rounds 1-2: Work as Cream Flowers Rounds 1-2 in lavender. (5 sc and 5 ch-3 sps)
- Round 3: Sl st into the first ch-3 sp. *(Sc, hdc, 3 dc, hdc, sc) in the ch-3 sp, sl st in next sc* 5 times. (35 petal sts and 5 sl sts)
- Fasten off, leaving a 20 cm tail. These flowers have no edging round, so they sit slightly smaller and softer than the cream ones.
Leaves (Sage Green, Make 6)
- Ch 8.
- Starting in the 2nd ch from hook: sl st, sc, hdc, dc, dc, hdc in the next 6 chs, then 3 sc in the last ch. (9 sts)
- Working along the opposite side of the foundation chain: hdc, dc, dc, hdc, sc, sl st in the next 6 chs. (15 sts)
- Ch 2 and sl st into the skipped ch at the tip to form the point.
- Fasten off, leaving a 15 cm tail. The 3-sc end is the base of the leaf.
Base Panel (Dusty Pink, Make 1)
- With 1.5 mm hook and size 10 thread, ch 31.
- Round 1: 2 sc in 2nd ch from hook, sc in next 28 chs, 4 sc in last ch. Rotate and work along the other side of the chain: sc in next 28 chs, 2 sc in the same ch as the first sts. Sl st to first sc to join. (64)
- Round 2: Ch 1, inc in next 2 sts, sc in next 28 sts, inc in next 4 sts, sc in next 28 sts, inc in next 2 sts. Sl st to join. (72)
- Round 3: Ch 1, (sc in next st, inc) 2 times, sc in next 28 sts, (sc in next st, inc) 4 times, sc in next 28 sts, (sc in next st, inc) 2 times. Sl st to join. (80)
- Fasten off, leaving a 30 cm tail. The panel should measure about 6.5 cm by 2 cm and stays hidden behind the flowers.
Romanian Cord (Dusty Pink, Make 1)
- With 2.0 mm hook and size 3 thread, leave a 10 cm tail and ch 2.
- Sc in 2nd ch from hook.
- Turn the work clockwise so the back faces you. Insert the hook into the single loop now on the left side, yo and pull up a loop, yo and pull through both loops on hook.
- Turn the work clockwise again. Insert the hook under the 2 strands now on the left side, yo and pull up a loop, yo and pull through both loops on hook.
- Repeat the previous step until the cord measures 36 cm. Fasten off and weave both tails a little way into the cord, then trim.
Sliding Sleeves (Dusty Pink, Make 2)
- With 2.0 mm hook and size 3 thread, ch 7.
- Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (6)
- Rows 2-10: Ch 1, sc in each st across. Turn. (6)
- Fasten off, leaving a 25 cm tail. Each sleeve should be about 2.5 cm long and wrap around two thicknesses of cord with a little room to spare.
Pearl Drops (Dusty Pink, Make 2)
- With 1.5 mm hook and size 10 thread, leave a 15 cm tail. Short drop: ch 20. Long drop: ch 32.
- Sl st in 2nd ch from hook and in each ch back to the start, for a firm, slim cord.
- Fasten off, leaving a 10 cm tail at the bottom end.
- On the bottom tail of each drop, thread a 3 mm gold bead, an 8 mm pearl, and a second 3 mm gold bead. Tie a tight overhand knot under the last bead, add a dot of glue, and trim once dry.
Bead Centers (Surface Detail)
- Rose: sew the 6 mm pearl over the MR. Bring the needle up just outside the pearl, pick up 2 gold seed beads, and backstitch them down. Repeat around to make a ring of about 14 gold seed beads.
- Cream Flowers: sew a 5 mm pearl in the center with a ring of about 12 gold seed beads around it.
- Lavender Flowers: sew a lavender 8/0 seed bead in the center, then sew 6 white seed beads in a tight ring around it to form a tiny beaded daisy.
- Knot each thread on the back and add a small dot of glue to every knot.
Finishing
If you want crisp petals, dampen the flowers and leaves with light fabric stiffener, pin them flat, and let them dry before assembly. Leave the rose unpinned at the center so its layers keep their lift.
Lay the base panel flat. Sew the rose to the middle of the panel through its Round 1 and Round 2 stitches. Sew a cream flower above and slightly to each side of the rose, and a lavender flower below it on each side, so the small flowers tuck just under the rose’s outer petals. Slide the leaves in behind the flowers where they meet the panel edge, one on each outer upper corner, one on each outer lower corner, and one under the rose on each side, then sew them through the panel. Sew the 10 small pearls around the outside of the cluster, in the gaps between petals and leaves, each on a single gold seed bead stop so it sits just beyond the edge. Stitch the top ends of both pearl drops to the back of the panel directly under the rose, with the short drop on the left and the long drop on the right.
Fold the cord in half to find its middle and sew the center 6 cm firmly along the back of the panel, stitching through the cord and panel together. Wrap one sleeve around the cord right beside the left edge of the panel, sew its long edges together with the tail, and tack it to that cord with two stitches so it does not slip. Repeat on the right side. Now bring the left end of the cord around behind the wrist and push it through the right sleeve, and bring the right end around and through the left sleeve. Pull each end through until about 4 cm hangs out. Tie a small overhand knot in each tail, add a dot of glue, and let dry. To adjust, pull the tails to tighten, or pull the cord loop apart to loosen.
Tips for Success
- When working behind the petals on Rounds 4 and 6 of the rose, pinch the petals already made forward with your thumb. This keeps them out of the hook’s way and stops you catching them by accident.
- Keep the Romanian cord tension even from start to finish. Tight and loose sections are easy to see on a cord this visible, and uneven cord slides unevenly through the sleeves.
- Test-fit the sleeves on a doubled length of cord before sewing them closed. The cord should move with a gentle pull but not fall slack on its own.
- Arrange all the flowers, leaves, and pearls on the panel and take a quick photo before you sew. It makes it easy to recreate the layout if pieces shift.
Common Mistakes to Avoid
- Working Round 4 of the rose into the tops of the Round 3 petals instead of around the Round 2 sc posts. That stacks the petals instead of layering them behind. Always look for the small sc from Round 2 at the base of each petal.
- Making the sleeves too tight. The bracelet then will not adjust at all. If a sleeve grips, unpick the seam and add one more row before sewing it closed again.
- Sewing the cord only at the very center of the panel. The heavy flower cluster tips forward when worn. Stitch along the full 6 cm so the panel stays upright.
- Letting the lavender and cream flowers sit on top of the rose. The rose then looks flat and hidden. Tuck the small flowers slightly under the rose’s outer petals instead.
- Skipping glue on the drop knots. The 8 mm pearls are heavy enough to work a knot loose over time.
Ways to Customize This Pattern
- Make the cord longer, about 90 cm, and turn the design into an adjustable choker or necklace with the flower cluster at the front.
- Work the rose in cream and the small flowers in blush pink for a softer bridal version, with a cream cord.
- Replace the cord with a satin ribbon threaded through the back of the panel for a quick hair tie or wrist corsage.
- Make a smaller single-flower version with just the rose, two leaves, and one drop for a matching child’s bracelet.
- Change the seasons: a burgundy rose, gold flowers, and rust leaves on a brown cord make a warm autumn bracelet.
Frequently asked questions
Yes, but the look changes. A cord made with size 10 thread is very thin next to the flowers. If you only have size 10, hold three strands together for the cord and sleeves and keep the 2.0 mm hook.
Add 3 cm to the cord for every 2 cm of extra wrist size. The sleeves and flower cluster stay the same.
A crocheted I-cord or a firm chain with a row of slip stitches worked back along it can replace it. Both slide through the sleeves, though the Romanian cord is rounder and holds its shape best.
Take it off before washing your hands or swimming. If it needs cleaning, dab it with a damp cloth and let it dry flat. Do not soak it, since water can weaken the glue on the knots and dull the pearls.
The finished Rosewater Crochet Rose Bracelet Pattern