Skip to content
✨ FREE Pattern 🎯 Beginner Friendly ⏱️ Single-Day Project

Sage and Cream Lattice Crochet Blanket Pattern

⏱️ 3–4 hours
↓ Jump to Pattern
Sage and Cream Lattice Crochet Blanket Pattern
✨ FREEBeginner Friendly
🪝

Beginner Friendly

Perfect for those just starting their crochet journey, with clear instructions and simple techniques

⏱️

Single-Day Project

A satisfying project you can complete in a single afternoon or evening.

🎀

Handmade Gift

A beautiful keepsake — free forever. Read online or print at home.

About This Sage and Cream Lattice Crochet Blanket Pattern

This lattice crochet blanket pattern builds a throw from small square blocks, each with a neat 5×5 grid of windows. Every square is a solid grid line in one color with little blocks of the second color sitting inside it, and the squares are joined in wide bands that swap colors, sage grid with cream windows, then cream grid with sage windows.

It is an advanced project because of the tapestry colorwork, the 48 matching squares, and the careful joining. Each square is worked flat in single crochet, carrying the second color across the back, then finished with a two-round border. Plan on 30 to 40 hours for the full throw, about 40 minutes per square once you find a rhythm.

It suits crocheters who are comfortable with color changes in single crochet and want a calm, graphic blanket that looks good with white bedding and natural wood. The finished throw is about 108 x 144 cm, and you can easily make it larger or smaller by changing the number of squares.

Materials

  • Chunky cotton-blend yarn, sage green (A) about 1 kg, estimated
  • Chunky cotton-blend yarn, cream (B) about 1 kg, estimated
  • Crochet hook 6.0 mm
  • Yarn needle
  • Scissors
  • Stitch markers for joining
  • Flat surface and pins for blocking and layout

Abbreviations

chchain
scsingle crochet
sl stslip stitch
st(s)stitch(es)
FOfasten off
Mmain color (the grid lines and border)
Xcontrast color (the window blocks)
Asage green yarn
Bcream yarn
( )xrepeat the stitches in brackets the number of times given
Before you start: Work a test square first and measure it. Aim for about 18 cm across after the border. If yours is smaller or larger, change the hook size, not the stitch count, so every square stays identical.

Colorways

  1. Colorway 1 (make 24): M = sage (A), X = cream (B). Sage grid, cream windows, sage border.
  2. Colorway 2 (make 24): M = cream (B), X = sage (A). Cream grid, sage windows, cream border.
  3. The instructions below use M and X, so the same steps work for both colorways.

Lattice Square (flat, tapestry crochet)

  1. Foundation: with M, ch 17. Sc in the 2nd ch from the hook and in each ch across (16). Ch 1 and turn at the end of every row.
  2. Row 1 (line row): sc in each st across in M (16)
  3. Rows 2-3 (window rows): sc in the first st in M, (2 sc in X, 1 sc in M)x5 (16). Carry the unused color loosely along the top of the stitches and crochet over it.
  4. Row 4 (line row): sc in each st across in M (16)
  5. Rows 5-6 (window rows): repeat rows 2-3 (16)
  6. Row 7 (line row): sc in each st across in M (16)
  7. Rows 8-9 (window rows): repeat rows 2-3 (16)
  8. Row 10 (line row): sc in each st across in M (16)
  9. Rows 11-12 (window rows): repeat rows 2-3 (16)
  10. Row 13 (line row): sc in each st across in M (16)
  11. Rows 14-15 (window rows): repeat rows 2-3 (16)
  12. Row 16 (line row): sc in each st across in M (16). Do not FO.
  13. Check your square: you should have 6 line rows and 5 window blocks across and down, and the square should be roughly as wide as it is tall.

Square Border (M)

  1. Round 1: ch 1, work 3 sc in the corner st. Sc evenly down the side, one sc in each st or row end, to the next corner. Work 3 sc in each corner and sc in each st between (68). Join with a sl st to the first sc.
  2. Round 2: ch 1, sc in each st around, working 3 sc in the middle st of each corner group (76). Join with a sl st, FO and weave in the ends.
  3. Block each square flat with a damp cloth and let it dry fully. Pin it to the same size as your test square.

Blanket Layout

  1. Lay out 6 squares across and 8 squares down (48 squares in all).
  2. Arrange in 4 horizontal bands of 2 rows each: Band 1 (rows 1-2) colorway 1, Band 2 (rows 3-4) colorway 2, Band 3 (rows 5-6) colorway 1, Band 4 (rows 7-8) colorway 2.
  3. Check that the window blocks all sit in the same direction before you start joining.

Joining

  1. Join the squares into 8 strips of 6. Hold two squares with right sides together and join with sc through both loops of the border along one edge, using the color of the border (76 sts around means 18 sts along each side, plus the corners).
  2. Join the strips in the same way, matching the corners so the seams make a clean cross.
  3. Work the horizontal seams last so the vertical and horizontal seams meet at a flat point at each corner.
  4. Weave in all ends.

Blanket Edging (A)

  1. Round 1: join A in any corner. Ch 1 and sc evenly around the blanket, working 3 sc in each corner and one sc in each border stitch. Join with a sl st.
  2. Round 2: ch 1, sc in each st around, working 3 sc in each corner. Join with a sl st, FO.
  3. Weave in the ends and block the whole blanket flat, pinning the edges square.

Finishing

Block the finished blanket by laying it flat on towels, pinning the corners and edges to the measurements you want, and misting it with water. Let it dry fully before moving it. This relaxes the carried yarn at the back of each square and makes the window blocks sit flat.

Check the back for loose floats and tack any long strands down with a few stitches. Fold the blanket at the foot of the bed with a sage band showing, and it will look like the photo.

Tips for Success

  • Make one test square before you commit to all 48, and write down your hook size and the measurements.
  • Change colors on the last pull-through of the stitch before, so the new color starts cleanly.
  • Keep the carried yarn loose. Pulling it tight puckers the square and makes the window blocks look uneven.
  • Count each row. Every line row has 16 sc, and every window row follows the same 1 + (2+1)x5 pattern.
  • Make the squares in batches of six, one strip at a time, so you can see the stripe pattern come together as you go.

Common Mistakes to Avoid

  • Squares that come out different sizes will not join flat. Block every square to the same size before you start joining.
  • Pulling the second color too tight puckers the fabric. Spread the stitches on your hook and carry the strand loosely.
  • Working a window row in the wrong position shifts the grid. Always start window rows with one stitch in M, and end them with one stitch in M.
  • Mixing up the two colorways in the layout breaks the stripes. Lay everything out on the floor before you join.
  • Joining with a tight seam makes ridges. Use a loose stitch and keep the seam tension close to the square tension.

Ways to Customize This Pattern

  • Swap sage for dusty blue, terracotta or charcoal for a different palette, and keep cream as the second color.
  • Change the band order to 1 row of each colorway for narrower stripes, or 3 rows for a bolder look.
  • Make a baby blanket with 4 squares across and 5 down (20 squares), about 72 x 90 cm.
  • Make matching pillow covers by joining two squares into a 2×1 panel and sewing it to a plain back.
  • Work only the lattice squares in one colorway and use a plain edging in the other for a simpler, calmer throw.

Frequently asked questions

The amounts above are estimates of about 1 kg of each color, based on roughly 40 g per square. Yarn use depends on your tension, so weigh your test square and multiply by 24 for each colorway, then add about 10 percent for the edging and joining.

Yes. Use a larger hook for bigger squares or a smaller hook for smaller ones, and keep the stitch counts the same so the grid stays even. You can also change the number of windows by adding or removing 3 stitches and 3 rows for each extra window.

Yes. Each window is only 2 stitches wide, so the unused color travels a short distance between blocks. Crocheting over it hides it inside the stitches, so the back stays tidy without cutting and rejoining.

Yes. Chain a multiple of 3 plus 1 stitches and repeat the same line row and window row sequence. You lose the border grid between squares, so the stripes will look softer, but the lattice pattern stays the same.

Sage and Cream Lattice Crochet Blanket Pattern

The finished Sage and Cream Lattice Crochet Blanket Pattern

🧶
Cozy Amigurumi

All our free patterns are tested multiple times by real makers before publishing. We believe clear, beautiful patterns should be free for everyone.

Read Our Story →
🎁

Get Free Patterns in Your Inbox

New free amigurumi patterns every week — no spam, unsubscribe anytime.

🔒 No spam · Unsubscribe anytime · 100% free patterns only

Made this? Share it! 📸 Tag #CozyCrochetPatterns on Instagram or Pinterest

Want More?

More Free Patterns Coming Soon 🎀

Instant PDF delivery. All tested. All beautiful.

Browse More Free Patterns →
Stay in the Loop

Free patterns + tips every week 📬

Join 1106 crocheters — no spam, just yarny goodness.

We respect your privacy. Unsubscribe anytime. Privacy Policy