Sage Fan Lace Oval Table Runner Crochet Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Sage Fan Lace Oval Table Runner Crochet Pattern
This crochet lace table runner pattern makes a long sage green oval with a stacked fan center, a raised ring, and a scalloped fan edge. It is the kind of piece that looks at home on a wooden sideboard or a dining table, and the soft green lets the lace do all the talking.
The runner is built in stages. You crochet a narrow center panel of stacked fans in rows, then work around it in the round to add a firm, ridged ring, a textured lace band, and a border of fans finished with small picots. The oval ends are shaped with evenly spaced increases so the piece lies flat instead of cupping, and every round has a stitch count you can check as you go.
Plan on about seven to nine hours of stitching. It suits crocheters who are comfortable with fans, working into chain spaces, and picking up stitches along an edge. If you have made a doily or an oval rug before, you already have the skills you need.
Materials
- Worsted weight (#4) yarn in sage green, wool blend or cotton about 175 yd / 160 m (one 100 g skein)
- 4.0 mm crochet hook
- Stitch markers 4, plus one to mark the start of each round
- Tapestry needle for weaving in ends
- Rustproof T-pins and blocking mats about 60 pins
- Scissors and a spray bottle or basin for wet blocking
Abbreviations
chchainsl stslip stitchscsingle crochetdcdouble crochetst(s)stitch(es)sp(s)space(s)tchturning chainBLOback loop onlyRndroundCenter Fan Panel
- Row 1: Ch 10. Sc in the 2nd ch from hook and in each ch across (9 sc). Turn.
- Row 2 (arch row): Ch 1, sc in the first sc, ch 4, skip 3 sc, sc in the next sc (the center st), ch 4, skip 3 sc, sc in the last sc. You have 3 sc and two ch-4 arches. Turn.
- Row 3 (fan row): Sl st in each of the 4 ch of the first arch, then sl st in the center sc. Ch 3 (counts as a dc), work 8 dc in the same sc (9 dc). Turn.
- Row 4 (arch row): Ch 1, sc in the first dc, ch 4, skip 3 dc, sc in the next dc (the 5th dc, the center of the fan), ch 4, skip 3 dc, sc in the top of the tch (9 sts accounted for). Turn.
- Rows 5-40: Repeat Rows 3 and 4 eighteen more times, ending with an arch row on Row 40.
- Row 41 (final fan row): Repeat Row 3. Do not turn or fasten off. You now have 20 fans stacked along the panel.
Raised Ring (Rounds 1-4)
- Rnd 1: Ch 1, turn. Sc in each of the 9 dc across the top. Rotate the work and sc down the side: 2 sc along the edge of each fan row and 1 sc along the edge of each arch row, working from Row 41 down to Row 2 (60 sc). Work 1 sc in each of the 9 underside loops of the foundation chain across the bottom (9 sc). Sc up the other side the same way (60 sc). Join with a sl st to the first sc (138 sc). Place a marker after the first 9 sts, after the next 60, after the next 9, and after the last 60 so you can see the two ends and two sides.
- Rnd 2: Ch 1 (does not count as a st). Top end (9 sts): 2 sc in the first st, sc in each of the next 3 sts, 2 sc in the next st, sc in each of the next 3 sts, 2 sc in the last st (12 sts). Left side: sc in each of the next 60 sts. Bottom end: repeat the top end (12 sts). Right side: sc in each of the last 60 sts. Join (144 sc).
- Rnd 3: Ch 1. Work in BLO throughout to make a ridge. Top end (12 sts): [sc in each of the next 3 sts, 2 sc in the next st] 3 times (15 sts). Left side: sc in each of the next 60 sts. Bottom end: repeat the top end (15 sts). Right side: sc in each of the last 60 sts. Join (150 sc).
- Rnd 4: Ch 1. Work in both loops. Top end (15 sts): [sc in each of the next 4 sts, 2 sc in the next st] 3 times (18 sts). Left side: sc in each of the next 60 sts. Bottom end: repeat the top end (18 sts). Right side: sc in each of the last 60 sts. Join (156 sc).
Lace Band (Rounds 5-8)
- Rnd 5: Ch 1. [Sc in the next st, ch 3, skip 2 sts] around. Join with a sl st to the first sc (52 sc and 52 ch-3 sps: 6 sps across each end and 20 sps down each side).
- Rnd 6: Sl st into the first ch-3 sp, ch 1. Work (sc, ch 3) in each ch-3 sp around, except in the 1st, 3rd, and 5th sp of each end, where you work (sc, ch 3, sc, ch 3) instead. Join with a sl st to the first sc (58 sc and 58 ch-3 sps: 9 sps across each end and 20 down each side).
- Rnd 7: Sl st into the first ch-3 sp, ch 1. Work 3 sc in each ch-3 sp around. Join (174 sc: 27 across each end and 60 down each side).
- Rnd 8: Ch 1. Top end (27 sts): [sc in each of the next 8 sts, 2 sc in the next st] 3 times (30 sts). Left side: sc in each of the next 60 sts. Bottom end: repeat the top end (30 sts). Right side: sc in each of the last 60 sts. Join (180 sc).
Scalloped Fan Border (Rounds 9-10)
- Rnd 9 (fan round): Ch 1. [Sc in the next st, skip 2 sts, 7 dc in the next st, skip 2 sts] 30 times: 5 fans across each end and 10 down each side. Join with a sl st to the first sc (30 sc and 30 fans of 7 dc).
- Rnd 10 (picot round): Ch 1. [Sc in the next sc, sc in each of the next 3 dc, sc in the next dc, ch 3 and sl st in the top of that sc to make a picot, sc in each of the last 3 dc of the fan] 30 times. Join with a sl st to the first sc (240 sc and 30 picots). Fasten off and weave in the ends.
Finishing
Weave in every end along the ring, where the ridge will hide them. Then wet block the runner: soak it in cool water, press out the excess in a towel, and lay it flat on your mats. Pin the ring straight along both sides, shape the two ends into smooth curves, and put one pin in the tip of each fan and each picot so the scallops open fully. Leave it to dry completely before you unpin it. Blocking is what opens the fans and evens the mesh, so please do not skip it.
Tips for Success
- Slip stitch loosely across each arch before a fan row. If the arch pulls tight, the fan will lean to one side, so go up half a hook size for that step if you tend to crochet tightly.
- Keep the four markers from Rnd 1 in place and move them up each round. They show you exactly where the end increases go in Rnds 2 to 8.
- Count your side stitches at the end of Rnd 1. You want 60 on each side, and fixing that now is much easier than fixing a wavy edge later.
- Use a firm yarn with some body, such as a cotton or a wool blend with a tight twist. It makes the ring crisp and the fans hold their shape.
- Work Rnd 3 in the back loops only and keep your tension even, since this single round is what gives the ring its raised look.
Common Mistakes to Avoid
- Slip stitching over the wrong number of chains in a fan row leaves the fan off-center. Always sl st across exactly 4 ch and into the center sc, and rip back to that row if a fan looks lopsided.
- Skipping the end increases makes the runner cup at the ends. Check that your end counts read 12, 15, 18, 27, then 30 as you go, and redo the round if they do not.
- Picking up too many or too few side stitches makes the ring ripple. Rip back only Rnd 1 and repick 2 sc per fan row edge and 1 sc per arch row edge.
- Losing your place in Rnd 9 throws off the fan count. You should finish with 30 fans: 5 on each end and 10 on each side.
- Working the bottom of the panel into the top loops of the foundation chain leaves a visible gap. Use the underside loops so the bottom edge lies flat.
Ways to Customize This Pattern
- Change the length in steps of two fans. With n fans (n must be even), Rnd 1 needs 3n sc down each side and Rnd 9 has n/2 fans per side. Eight fans gives a small mat about 22 x 30 cm.
- Work the ring in a darker sage or a cream so it stands out against the lace.
- Leave out the picots in Rnd 10 for a smoother, simpler scalloped edge.
- Add a round of sl sts in an accent color around the outside after Rnd 10 for a crisp outline.
- Use a mercerized cotton for a sharper, more formal look, or a soft wool blend for a cozier feel.
Frequently asked questions
Add or remove fans in pairs. Each fan needs 2 rows (one arch row and one fan row), so n fans is 2n plus 1 rows, and each side pick-up is 3n sc. Keeping n even means the scallop count in Rnd 9 works out evenly.
The slip stitches move your hook to the center of the previous fan without adding height. That is what makes each fan sit exactly on top of the last one and keeps the column straight.
Yes. Cotton gives crisper fans and a firmer ring, but it has less stretch, so keep your tension relaxed on the arches and block it firmly. A wool blend is more forgiving and shapes easily with pins.
Hand wash in cool water, press out the water gently, and reshape it flat with pins while it dries. Do not wring it, or the fans will lose their shape.