Sage Green Checkerboard Tassel Blanket Crochet Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Sage Green Checkerboard Tassel Blanket Crochet Pattern
This crochet checkerboard tassel blanket pattern alternates two kinds of square in a classic checkerboard grid: a solid sage green square worked in a dense radial spiral texture, and a cream square worked in a varied granny-style stitch texture with its own subtle pattern. Rather than a plain color block, both square types carry real surface texture, so the checkerboard reads as rich and tactile even without any applied motifs. Both short ends of the finished blanket are trimmed with a generous row of matching tassels in sage green and cream.
What makes this design distinctive is that both halves of the checkerboard carry distinct, deliberate textures rather than one textured square paired with a flat one: the green squares use a tight radial spiral worked from the center outward, while the cream squares combine shell and cluster stitches for a looser, more varied surface. Maintaining 2 genuinely different textures consistently across a very large alternating grid, finished with a substantial two-tone tassel fringe along both ends, is what makes this a demanding project. Expect to spend 42-50 hours total for the full blanket.
This is an advanced pattern, best suited to someone comfortable working two distinctly different textured squares to the exact same finished size and confident assembling a substantial two-tone tassel fringe, rather than someone wanting a single-texture or flat checkerboard project.
Materials
- Worsted weight cotton-acrylic blend yarn, sage green ~650g, green squares and tassels
- Worsted weight yarn, cream ~650g, cream squares and tassels
- Crochet hook 5 mm (US H/8)
- Tapestry/yarn needle
- Piece of cardboard or a book, for wrapping tassels
- Steam iron and pressing cloth, or a large blocking mat and pins
- Sharp scissors
Abbreviations
chchainsl stslip stitchscsingle crochethdchalf double crochetdcdouble crochetMRmagic ringincincrease (2 sts in one st)ch-spchain spacest(s)stitch(es)reprepeatFOfasten offSage Green Radial Square (make approximately 98, for alternating placement)
- With sage green, 8 dc in MR. Sl st to join. (8 sts)
- Round 2: inc in each st around. (16 sts)
- Round 3: *dc 1, inc; rep from * around. (24 sts)
- Round 4: *dc 2, inc; rep from * around. (32 sts)
- Round 5: *dc 3, inc; rep from * around. (40 sts)
- Round 6 (begin squaring): work dc evenly around, but at 4 evenly spaced points, work 3 dc into a single st to form the beginnings of 4 corners, flattening the circle’s edge at those points.
- Round 7: continue building out the 4 corners with (2 dc, ch 1, 2 dc) corner groups, and dc evenly along the 4 sides between corners, so the motif reads clearly as a square.
- Round 8 (solid finishing round): sc evenly around the entire square, working 3 sc in each corner, for a clean, solid edge. Sl st to join, FO leaving a long tail for joining.
- Repeat this entire sequence to make approximately 98 green squares total.
Cream Textured Square (make approximately 97, for alternating placement)
- With cream, ch a number matching the green square’s width, worked as a foundation chain. Row 1: dc in 4th ch from hook and in each ch across.
- Row 2: ch 2, turn, *shell (3 dc, ch 1, 3 dc) in next st, skip 2 sts, sl st in next st, skip 2 sts; rep from * across, building a shell and cluster texture.
- Row 3: ch 2, turn, work a row of clusters into the shell spaces from the row below, offsetting slightly to build a varied, textured surface.
- Continue alternating shell and cluster rows until the square is a true square matching the green square’s finished size exactly.
- Work a final solid sc round around the entire square, matching Round 8 of the green square, for a clean edge to join from. FO leaving a long tail for joining.
- Repeat for approximately 97 cream squares total.
Join-As-You-Go Assembly
- Plan your grid (for example, 13 columns x 15 rows for a full/queen blanket), alternating green and cream squares in both directions so the finished piece reads as a true checkerboard, with no two same-color squares ever touching edge to edge.
- Join squares as you complete each one, whipstitching or slip-stitch joining along the solid sc edge to the neighboring square already in place.
- Work row by row, double-checking the alternation against both the square beside it and the square above it before each join.
Side Edging
- With cream, work a simple sc round along both long sides of the assembled blanket to neaten the edge, since the fringe will finish the two short ends instead.
Two-Tone Tassel Fringe (both short ends)
- Cut sage green and cream yarn into lengths of approximately 25 cm, 4-5 strands per tassel, mixing both colors within each tassel.
- Fold each group of strands in half, and using a crochet hook, pull the folded loop through a stitch along one short end of the blanket, then pull the loose ends through the loop and tighten to form a knot.
- Space tassel knots evenly across both short ends, roughly every 3-4 cm, for a full, dense fringe line.
- Trim all tassel ends evenly once every knot is in place. Repeat along the opposite short end.
Finishing
Weave in every square’s starting and ending tail individually across the entire blanket, since a project this size accumulates a very large number of loose ends. Steam-block the finished blanket flat, checking that both the green radial squares and cream textured squares lie at exactly the same height so the overall surface reads as flat where the two textures meet. Comb through the tassels lightly with your fingers and trim evenly for a clean finish.
Tips for Success
- Work both square types to the exact same finished dimensions; any size mismatch is very visible once the two textures sit side by side in a checkerboard.
- Keep a written grid chart marking green versus cream placement, so you always know which type goes where as you assemble.
- Work squares in both types in parallel batches rather than finishing all of one type first, so you can track your alternating count accurately.
- Cut all tassel strands to the same length using a fixed-width cardboard guide, so every knot along both ends matches.
- Block thoroughly and evenly across the whole piece, since any unevenness between the two textures becomes more visible once joined.
Common Mistakes to Avoid
- Working green and cream squares to slightly different sizes creates a visibly uneven, rippled checkerboard surface once joined. Fix: measure both square types against each other before making a full batch of either.
- Losing track of the alternating placement partway through leads to two same-color squares accidentally sitting adjacent. Fix: keep a written grid chart and mark off each position as you join it.
- Cutting tassel strands to inconsistent lengths gives a ragged fringe edge. Fix: use a fixed-width cardboard wrap to cut every strand the same length.
- Skipping a size-matching test square before committing to a full batch of either type. Fix: always make and compare one of each type before mass-producing either.
- Underestimating how much yarn each color requires given the roughly 50/50 split plus tassels. Fix: calculate yardage separately for green and cream from several finished squares and a test tassel before buying all your yarn.
Ways to Customize This Pattern
- Reduce the grid size for a throw blanket instead of a full bedspread.
- Swap the sage green and cream palette for a different two-color combination to match your own decor.
- Skip the tassels and finish all 4 sides with the same simple sc edging for a cleaner, more minimal look.
- Use a single texture throughout (either all radial or all shell-and-cluster) in two colors, for a checkerboard without the dual-texture contrast.
- Add a fabric backing to the full blanket for added warmth and easier care.
Frequently asked questions
Work and block one of each type early on, then measure them against each other precisely. Adjust your starting chain, round count, or row count on whichever type runs smaller before committing to a full batch of either.
Yes. Finish all 4 sides with the same simple sc edging used on the long sides, skipping the fringe entirely, for a cleaner, more minimal finished look.
This usually means the two square types weren’t worked to exactly the same finished dimensions. Recheck your gauge on both, and block firmly and evenly across the whole surface to help minimize any remaining height difference.
Spacing tassels every 3-4 cm across both short ends of a blanket this width typically needs 40-50 tassels total; count your specific blanket width and divide by your spacing to get an exact number.
The finished Sage Green Checkerboard Tassel Blanket Crochet Pattern