Sky Blue Fan Lace Square Bedspread and Cushions Crochet Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Sky Blue Fan Lace Square Bedspread and Cushions Crochet Pattern
This lace square crochet bedspread is made from 56 sky blue squares, each a small piece of lace: a ring of eyelets at the center, four fans of spokes that spread toward the middle of each side, and solid triangles that fill the corners. Joined together, the fans of neighboring squares meet across the seams and form larger circular patterns across the bed, the way old cotton bedspreads did. A shell border and two lace cushions finish the set.
The fans grow round by round in a simple progression: single spokes with short chains between them, then longer chains, then V-stitches, then shells, and finally a solid row that closes each fan off. Meanwhile the corners grow by a few stitches each round. Using one soft color lets the lace itself carry the design, and a pillow or sheet underneath shows through the open spaces.
The bedspread takes about 95 to 115 hours. Each square takes under an hour and a half and is easy to carry around. It suits a crocheter who is comfortable following round-by-round lace instructions and counting stitches carefully.
Materials
- Worsted weight cotton, sky blue about 4,000 m (20 skeins of 100 g / 200 m)
- 5 mm crochet hook
- Stitch markers about 4, for marking the corners
- Tapestry needle and scissors
- Two 40 cm square cushion forms, in a pale cover that will show through the lace
Abbreviations
MRmagic ringchchainscsingle crochetdcdouble crochetsl stslip stitchV(dc, ch 1, dc) in the same stpicotch 3, sl st in 3rd ch from hookBLOback loop onlyskskipspspacest(s)stitch(es)rndroundreprepeatRS / WSright side / wrong sideFlower Center (Rnds 1-3)
- Rnd 1: MR, ch 3 (counts as dc here and throughout), 15 dc in ring, join with sl st to top of ch 3. Pull the ring tight. (16 sts)
- Rnd 2: ch 5 (counts as dc and ch 2), *dc in next st, ch 2; rep from * 14 more times, join to 3rd ch of ch 5. (16 dc, 16 ch-2 sps)
- Rnd 3: sl st in first ch-2 sp, ch 3, 2 dc in same sp, 3 dc in each remaining ch-2 sp, join. (48 dc)
- The ch-2 sps of Rnd 2 form the ring of eyelets around the center.
Fan Foundation (Rnd 4)
- Rnd 4: ch 3, [ch 1, dc in next st] 6 times, ch 2, sk next 2 sts, (2 dc, ch 3, 2 dc) in next st, ch 2, sk next 2 sts, *dc in next st, [ch 1, dc in next st] 6 times, ch 2, sk next 2 sts, (2 dc, ch 3, 2 dc) in next st, ch 2, sk next 2 sts; rep from * 2 more times, join to top of ch 3.
- This makes 4 fans of 7 dc spokes each, separated by 4 corner groups. (each quarter uses 12 sts of Rnd 3)
- Place a marker in each corner ch-3 sp.
Growing the Fans (Rnds 5-8)
- Rnd 5: ch 3, [ch 2, dc in next spoke] 6 times, *ch 2, dc in next 2 dc, (2 dc, ch 3, 2 dc) in corner sp, dc in next 2 dc, ch 2**, dc in next spoke, [ch 2, dc in next spoke] 6 times; rep from * 3 more times, ending the last rep at **, join. (7 spokes with ch-2 between in each fan; 4 dc on each side of each corner sp)
- Rnd 6: ch 3, [ch 3, dc in next spoke] 6 times, *ch 2, dc in each dc to corner sp, (2 dc, ch 3, 2 dc) in corner sp, dc in each dc to the ch-2 sp, ch 2**, dc in next spoke, [ch 3, dc in next spoke] 6 times; rep from * 3 more times, ending the last rep at **, join. (7 spokes with ch-3 between in each fan; 6 dc on each side of each corner sp)
- Rnd 7: ch 4 (counts as dc and ch 1), dc in same st, [ch 2, V in next spoke] 6 times, *ch 2, dc in each dc to corner sp, (2 dc, ch 3, 2 dc) in corner sp, dc in each dc to the ch-2 sp, ch 2**, V in next spoke, [ch 2, V in next spoke] 6 times; rep from * 3 more times, ending the last rep at **, join to 3rd ch of ch 4. (7 Vs in each fan; 8 dc on each side of each corner sp)
- Rnd 8: sl st in first ch-1 sp, ch 3, 2 dc in same sp, [ch 2, 3 dc in ch-1 sp of next V] 6 times, *ch 2, dc in each dc to corner sp, (2 dc, ch 3, 2 dc) in corner sp, dc in each dc to the ch-2 sp, ch 2**, 3 dc in ch-1 sp of next V, [ch 2, 3 dc in ch-1 sp of next V] 6 times; rep from * 3 more times, ending the last rep at **, join. (7 shells of 3 dc in each fan; 10 dc on each side of each corner sp)
Squaring Off (Rnds 9-10)
- Rnd 9: ch 3, dc in next 2 dc, [dc in next ch-2 sp, dc in next 3 dc] 6 times, *dc in next ch-2 sp, dc in each dc to corner sp, (2 dc, ch 3, 2 dc) in corner sp, dc in each dc to the ch-2 sp, dc in ch-2 sp**, [dc in next 3 dc, dc in next ch-2 sp] 6 times, dc in next 3 dc; rep from * 3 more times, ending the last rep at **, join. (53 dc per side: 12 at each corner, 1 on each side of the fan and 27 across the fan; 212 dc)
- Rnd 10: sl st to the next corner sp, ch 1, (sc, ch 2, sc) in same sp, *sc in each st to next corner, (sc, ch 2, sc) in corner sp; rep from * 2 more times, sc in each remaining st, join. Fasten off. (55 sc per side, 220 sc)
- Block the square to about 29 cm. Make 56.
Joining the Squares
- Lay out 56 squares, 7 across and 8 long.
- Join method: place two squares side by side, RS up. Sl st through the BLO of the matching sts of both squares, starting and ending in the corner ch-2 sps. (57 sl st per side, including both corners)
- Join the squares into rows of 7, then join the rows along their long edges.
- Where four corners meet, work through all four corner sps so no gap is left.
- The joined bedspread measures about 203 x 232 cm.
Shell Border
- Rnd 1: RS facing, join in a corner sp. Work 1 sc in each bedspread corner sp, sc in each st along the edge of every square, and 1 sc in each point where two squares meet. Join. (447 sc along each long side, 391 along each short side and 4 at the corners: 1,680 sts)
- Rnd 2: ch 1, *sc in next st, sk next 2 sts, 5 dc in next st, sk next 2 sts; rep from * around, join. (280 shells)
- Rnd 3: *sl st in sc, sc in next 2 dc, (sc, picot, sc) in next dc, sc in next 2 dc; rep from * around, join. Fasten off. (280 picot scallops)
- The border is about 5 cm deep. The shells ease around the corners on their own.
Lace Cushions (make 4 large squares)
- Work Rnds 1-10 of the square. (55 sc per side)
- Rnd 11: sl st to the next corner sp, ch 3, (dc, ch 2, 2 dc) in same sp, *dc in each st to next corner, (2 dc, ch 2, 2 dc) in corner sp; rep from * 2 more times, dc in each remaining st, join. (59 dc per side)
- Rnds 12-14: rep Rnd 11, adding 4 dc per side each rnd. (Rnd 12: 63 per side, Rnd 13: 67, Rnd 14: 71 dc per side, 284 dc)
- Each large square measures about 39 cm. Make 2 for each cushion.
Cushion Assembly
- Hold two large squares WS together, with the corners matched.
- Rnd 1: join in a corner sp through both layers. Working through both layers, 3 sc in each corner sp and sc in each st along the sides. Insert the cushion form before closing the last side. Join. (296 sts: 74 per side including corners)
- Rnd 2: ch 1, *sc in next 2 sts, picot; rep from * around, join. Fasten off. (148 picots)
- Rep with the second cushion.
Finishing
Weave in all ends along the solid parts of the squares, such as the corner triangles or the sc rounds, rather than through the open fans, where they would show.
Wet block the bedspread on a large flat surface. Pin each square straight, open the fans so the spokes fan out evenly, and pin every picot along the border. Let it dry completely. Lay it over a white or pale sheet so the lace shows clearly on the bed.
Tips for Success
- Mark the four corner sps in Rnd 4 and move the markers up each round. It makes the long rounds much easier to follow.
- Count the spokes in each fan after every round: there should always be 7 spokes, 7 Vs or 7 shells.
- Use a mercerized cotton for crisp lace. It keeps the spokes straight and the shells well defined.
- Block every square before joining. Lace squares can vary in size until they’re blocked.
- Join in good light. The BLO join is easy to see in pale blue, but it’s still easy to miss a st near the corners.
Common Mistakes to Avoid
- Working into the ch-2 sps at the sides of the fans. These sps are just chained over until Rnd 9. If you work stitches into them earlier, the fans fill in and the square ruffles.
- Corners that don’t grow. Each corner must gain 2 dc on each side every round. If a corner stays small, the square becomes a circle.
- Fans that cup. If the fans bowl up, the chains between spokes are too tight. Keep them relaxed, especially in Rnds 6 and 7.
- Uneven sides after Rnd 9. Each side must have 53 dc. If a side has more or fewer, recount the fan section before working Rnd 10.
- A border that pulls. Work exactly 1 sc at each corner and at each joining point in Rnd 1, or the shell count won’t come out even.
Ways to Customize This Pattern
- Make it in white or ivory for a classic heirloom bedspread, or in blush pink for a romantic bedroom.
- Change the size: each square adds about 29 cm. A throw of 4 by 5 squares is about 126 x 155 cm with the border.
- Make a tablecloth of 3 by 3 or 4 by 4 squares with the shell border.
- Work the flower center (Rnds 1-3) in a darker blue for a little contrast.
- Make rectangular shams from two squares joined side by side, with plain dc rounds added to reach your pillow size.
Frequently asked questions
Each fan sits in the middle of a side. When two squares meet, their fans face each other across the seam, and with the fans of the squares above and below, they form a larger round pattern across the bed.
The stitches are simple: dc, chains, Vs and shells. The challenge is keeping track of the long rounds and counting. With stitch markers at the corners, it becomes very manageable.
Yes, on Rnd 10. Join each new square to its neighbors with a sl st in each matching st. Block the first few squares first so you know they’re the right size.
Wash it on a gentle cold cycle inside a large laundry bag, or by hand, and dry it flat. Re-block the lace while it’s damp to open up the fans again.
The finished Sky Blue Fan Lace Square Bedspread and Cushions Crochet Pattern