Sunflower and Dahlia Vine Table Runner Crochet Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Sunflower and Dahlia Vine Table Runner Crochet Pattern
This crochet sunflower dahlia table runner pattern alternates two large flower types down a single winding vine: bright mustard gold sunflowers with deep brown centers, and multi-layered burgundy dahlias each topped with a small white daisy accent at their core. Small white daisies, orange and olive leaves, and tiny bud clusters fill the vine between the large blooms, so the whole runner reads as one continuous, richly detailed garland.
What makes this design distinctive is the dahlia’s construction: three full rounds of pointed, increasingly larger petals build up from the base, and a separate small white daisy is worked and stitched into the very center, giving each dahlia a two-flower look in one motif. Paired with the classic layered sunflower on repeat, and connected by a vine dense with leaves and small white accent flowers, this piece has real complexity in both motif variety and sheer piece count. Expect to spend 26-30 hours total across 2 sunflowers, 3 dahlias, their daisy centers, and all the leaf and accent flower details.
This is an advanced pattern, best suited to someone experienced with multi-round layered flowers and comfortable managing several different motif types within one connected vine, rather than someone wanting a single repeated technique.
Materials
- DK weight yarn, mustard gold ~60g, 2 sunflowers
- DK weight yarn, dark brown ~20g, sunflower centers
- DK weight yarn, burgundy wine ~80g, 3 dahlias
- DK weight yarn, white/cream ~40g, daisy centers and accent daisies
- DK weight yarn, mustard/orange ~15g, daisy center dots
- DK weight yarn, olive green ~50g, vine and leaves
- DK weight yarn, rust orange ~20g, accent leaves
- DK weight yarn, sage green ~15g, bud accents
- Crochet hook 3.5 mm (US E/4)
- Tapestry/yarn needle
- Steam iron and pressing cloth, or blocking mat and pins
- Straight pins, for positioning motifs before sewing
- Sharp scissors
Abbreviations
chchainsl stslip stitchscsingle crochethdchalf double crochetdcdouble crochetMRmagic ringincincrease (2 sc in one st)ch-spchain spacest(s)stitch(es)reprepeatFOfasten offSunflower Motif (make 2)
- With dark brown, 8 sc in MR, inc around (16 sts), sl st to join, FO leaving a short tail. This is the flat textured center.
- With mustard gold, join in any st of the center. Round 1 (inner petals): *ch 2, dc 3 in next st, ch 2, sl st in same st; rep from * around all 16 sts. 16 petals.
- Round 2 (outer petals): join gold in a base st between two inner petals. *ch 3, dc 4 in next base st, ch 3, sl st in same st; rep from * around. 16 larger petals layered behind the first set.
- FO leaving a long tail for attaching. Fold outer petals slightly back so the two rounds separate visually.
Dahlia Motif (make 3)
- With burgundy, 8 sc in MR. Sl st to join, FO leaving a short tail. This is the small base disc.
- Round 1 (inner petals): join burgundy behind the disc. *ch 3, sl st in 2nd ch from hook, sc in next ch, sl st in same base st; rep from * around all 8 sts.
- Round 2 (middle petals): join burgundy behind Round 1. *ch 4, sl st in 2nd ch from hook, sc 2, sl st in same base st; rep from * around.
- Round 3 (outer petals): join burgundy once more behind Round 2. *ch 5, sl st in 2nd ch from hook, sc 2, hdc 1, sl st in same base st; rep from * around for a final, longest layer.
- FO leaving a long tail for attaching. Fold each successive round back and down from the one before it so all 3 layers show clearly.
Daisy Center Accent (make 3, for dahlia centers, plus approximately 6 more as vine accents)
- With mustard/orange, 6 sc in MR. Sl st to join, FO leaving a short tail. This is the small flat center dot.
- With white, join in any st of the center. Round 1 (petals): *ch 3, sl st in 2nd ch from hook, sc in next ch, sl st in same base st; rep from * around all 6 sts to form 6 rounded petals.
- FO leaving a short tail. Repeat for 3 dahlia-center daisies plus approximately 6 more for scattering along the vine, 9 total.
Vine and Leaves
- With olive green, ch a length matching your planned motif line, approximately 100 cm, to form the vine’s main spine.
- Sl st back down the entire chain for body and a smooth edge. FO leaving tails at both ends.
- Leaf motif, olive (make 16): ch 9. Starting in 2nd ch from hook: sl st, sc 2, hdc 2, dc 2, 3 dc in last ch, then work back down the other side: dc 2, hdc 2, sc 2, sl st. FO leaving a short tail.
- Leaf motif, rust orange (make 8): repeat the same construction in rust orange. FO leaving a short tail.
- Repeat for 24 leaves total, mixing olive and rust throughout, to be tacked along the vine between and around the flowers.
Bud Accents (make approximately 8, in sage green)
- 5 sc in MR. Pull the MR tail tight to close, then sl st into the first sc to close into a small tight bud shape.
- FO leaving a short tail for attaching. Repeat for approximately 8 total, tucked among the leaves near several flowers.
Assembling Each Dahlia
- Sew a finished white daisy center accent directly onto the middle of each dahlia’s base disc, before the dahlia is attached to the vine.
- Repeat for all 3 dahlias.
Assembly
- Pin the vine down the center of your work surface, curving it gently side to side rather than in a straight line.
- Position the 5 large flowers along the vine in this order: sunflower, dahlia, dahlia, dahlia, sunflower, spacing them evenly, and pin.
- Tack the vine to the mesh at intervals, then sew each sunflower and dahlia down firmly through its center or base into the vine below.
- Tuck and tack 4-5 leaves around the base of each large flower, mixing olive and rust, angling them outward from the stem.
- Scatter the remaining accent daisies and bud clusters along the vine between flowers, spacing them irregularly, and tack each one down.
Finishing
Once every motif is attached, turn the runner over and check for any piece held by only a single stitch; add a second point wherever something feels loose. Weave in all remaining tails. Steam-block gently, keeping the sunflower and dahlia petal layers separated and slightly domed rather than pressed flat, and let the whole piece dry completely before moving it to the table.
Tips for Success
- Sew each dahlia’s daisy center on before attaching the dahlia to the vine; it’s much easier to center accurately on a flat, unattached motif.
- Fold sunflower and dahlia outer petal rounds back deliberately after attaching; this step is what turns a flat flower into a dimensional bloom.
- Keep the flower order strict, sunflower-dahlia-dahlia-dahlia-sunflower, to match the balanced bookend look shown in the photo.
- Mix olive and rust leaves throughout rather than grouping by color, for a natural, blended vine.
- Curve the vine loosely rather than pinning it straight, for a more natural, garden-like flow.
Common Mistakes to Avoid
- Attaching the daisy center after the dahlia is already sewn to the vine makes accurate centering much harder. Fix: assemble each dahlia’s daisy center first, as a separate step.
- Sewing petal layers down flat against each other loses the ruffled, dimensional look. Fix: fold and tack each outer round back and slightly down after attaching.
- Reversing the flower order breaks the symmetrical sunflower-bookend layout shown in the photo. Fix: double check flower order before sewing anything down permanently.
- Placing accent daisies and buds in a perfectly even row along the vine looks stiff. Fix: scatter them irregularly, closer together in some spots and farther in others.
- Pinning the vine in a straight line looks stiff against the finished florals. Fix: curve it gently from side to side as you pin.
Ways to Customize This Pattern
- Reduce to 3 flowers total, 1 sunflower and 2 dahlias, for a shorter runner suited to a smaller table.
- Swap the burgundy dahlias for a deep purple for a different jewel-toned palette.
- Skip the daisy centers on the dahlias for a simpler, single-color flower.
- Add a third sunflower in the very center for an odd-numbered, more varied flower rhythm.
- Scale each large flower down slightly for a set of matching coasters using the same motifs.
Frequently asked questions
Lay the finished daisy on the dahlia’s base disc before sewing and adjust until it sits centered by eye, then pin before stitching. Doing this while the dahlia is still flat and unattached makes it much easier to judge.
Yes. Add dahlias in the middle section to keep the sunflower-bookend symmetry, extending the vine length and leaf count proportionally to match.
24 gives a full, leafy vine similar to the photo. Reduce the leaf count for a lighter, more open vine, or add more for an even denser garland look.
This usually means the outer 2 petal rounds weren’t folded back after attaching. Gently fold and tack the middle and outer rounds back and down from the inner round so all 3 layers show clearly.
The finished Sunflower and Dahlia Vine Table Runner Crochet Pattern