Teal and Cream Swirl Medallion Bedspread Crochet Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Teal and Cream Swirl Medallion Bedspread Crochet Pattern
This teal spiral crochet bedspread is covered with 124 small round medallions, each with a bold teal and cream swirl like a breaking wave. Around the swirl, a cream ring of open windows and a teal bobble edge frame each medallion. The medallions are linked by cream chain loops that form a lacy net between them, set in a honeycomb pattern. Two Euro shams of the same medallions and a ribbed teal lumbar pillow complete the coastal look.
The swirl is worked with both colors at once: each color works over the other color’s stitches from the round before, then waits while the other catches up, so the rounds spiral with no sewing. The final round of chain loops does double duty, finishing each medallion and joining it to its neighbors. Where three medallions meet, one loop ties all three together, which closes each gap with a small lacy triangle.
The set takes about 130 to 150 hours. Each medallion takes under an hour, which makes it a satisfying project to work on a few motifs at a time. It suits a crocheter who is comfortable with bobbles and handling two colors at once.
Materials
- Worsted weight cotton blend, deep teal about 2,900 m (15 skeins of 100 g / 200 m)
- Worsted weight cotton blend, cream about 2,600 m (13 skeins)
- 5 mm crochet hook
- Locking stitch markers at least 2, for holding the dropped loops
- Tapestry needle and scissors
- Two 60 cm square Euro pillows and one 30 x 50 cm cushion form
Abbreviations
MRmagic ringchchainscsingle crochethdchalf double crochetdcdouble crochetsl stslip stitchbobble(yarn over, insert hook in st, pull up a loop, yarn over, pull through 2 loops) 4 times in the same st, yarn over, pull through all 5 loopsBLOback loop onlyrev screverse single crochet (crab stitch), worked left to rightskskipspspacest(s)stitch(es)rndroundreprepeatJAYGjoin as you goRS / WSright side / wrong sideTwo-Color Spiral (Rnds 1-5)
- How it works: in every rnd, pick up one color and work over the other color’s sts from the previous rnd, then drop it and do the same with the other color. Each color always covers half the circle.
- Rnd 1: with teal (A), MR, ch 1, sc, hdc, 4 dc in ring. Drop A and put a marker in its loop. With cream (B), pull up a loop in the ring, ch 1, sc, hdc, 4 dc in ring. Drop B. Pull the ring tight. (6 sts in each color, 12 sts)
- Rnd 2: pick up A, 2 dc in each of the next 6 sts (B’s sts). Drop A. Pick up B, 2 dc in each of the next 6 sts (A’s sts). Drop B. (12 sts in each color, 24 sts)
- Rnd 3: with each color in turn, *dc in next st, 2 dc in next st; rep from * 5 more times. (18 sts in each color, 36 sts)
- Rnd 4: with each color in turn, *dc in next 2 sts, 2 dc in next st; rep from * 5 more times. (24 sts in each color, 48 sts)
- Rnd 5 (taper): with each color in turn, (dc in next 3 sts, 2 dc in next st) 4 times, hdc in next 2 sts, 2 hdc in next st, sc in next 2 sts, 2 sc in next st, sc in next st, sl st in next st. Fasten off both colors. (30 sts in each color, 60 sts)
Window Ring (Rnds 6-8)
- Rnd 6: join cream in any st, ch 1, *sc in next 4 sts, 2 sc in next st; rep from * 11 more times, join. (72 sc)
- Rnd 7: ch 5 (counts as dc and ch 2), sk next st, *dc in next st, ch 2, sk next st; rep from * 34 more times, join to 3rd ch of ch 5. (36 dc, 36 ch-2 sps)
- Rnd 8: ch 1, *sc in dc, 2 sc in next ch-2 sp; rep from * 35 more times, join. Fasten off cream. (108 sc)
Bobble Edge (Rnd 9)
- Rnd 9: join teal in any st, ch 2, bobble in same st (the ch 2 stands in for the first yarn over), ch 3, sk next 2 sts, *bobble in next st, ch 3, sk next 2 sts; rep from * 34 more times, join to top of first bobble. Fasten off teal. (36 bobbles, 36 ch-3 sps)
Loop Round (Rnd 10, first medallion only)
- Rnd 10: join cream with sc in the top of any bobble, *ch 5, sc in the top of next bobble; rep from * 34 more times, ch 5, join to first sc. Fasten off. (36 ch-5 loops)
- Loop positions: hold the medallion RS up and turn it so the first loop points left, at 9 o’clock. That is loop 1. Counting in the direction you worked, loop 7 points down and left, loop 13 down and right, loop 19 right, loop 25 up and right and loop 31 up and left.
- The loops halfway between those (4, 10, 16, 22, 28 and 34) point into the small gaps where three medallions meet.
Joining As You Go (Rnd 10 for all other medallions)
- Work Rnds 1-9 as usual. On Rnd 10, plan your starting point so loop 1 will point left in the finished layout.
- Neighbor join: replace the ch 5 with: ch 2, sl st in the matching loop of the neighbor, ch 2.
- Loop 1 joins to loop 19 of the medallion on the left. Loop 7 joins to loop 25 of the medallion below left. Loop 13 joins to loop 31 of the medallion below right.
- Gap join: a gap loop ties three medallions together. Replace the ch 5 with: ch 2, sl st in the first neighbor’s gap loop, ch 1, sl st in the second neighbor’s gap loop, ch 2.
- Loop 4 joins to loop 16 of the medallion on the left and loop 28 of the medallion below left. Loop 10 joins to loop 22 of the medallion below left and loop 34 of the medallion below right.
- Where only one of the two neighbors exists, as at the edges, join a gap loop to that one neighbor only.
Honeycomb Layout
- The medallions are set in offset rows: 13 rows, alternating 10 and 9 medallions. (124 medallions)
- Row 1 (10 medallions): the first medallion is worked plain. Medallions 2-10 join loop 1 to the medallion on the left.
- Row 2 (9 medallions): each medallion sits between two medallions of Row 1, which are its lower left and lower right neighbors. Medallion 1 joins loops 7, 13, 4 (to the lower left only) and 10. Medallions 2-9 also join loop 1 to the medallion on the left and use the full three-way join on loop 4.
- Row 3 (10 medallions): medallion 1 has only a lower right neighbor; it joins loop 13 and loop 10 to that medallion. Medallions 2-9 join loops 1, 7, 13, 4 and 10 as described. Medallion 10 joins loop 1, loop 7, loop 4 and loop 10 (to the lower left only).
- Rows 4-13: rep Rows 2 and 3 alternately, ending with a Row 3.
- Turn every medallion so its spiral turns the same way. The bedspread measures about 210 x 239 cm, with a scalloped edge of loops and bobbles.
Euro Shams (make 2)
- Front: make 8 medallions and join them in 3 offset rows of 3, 2 and 3, as for the bedspread. (about 63 x 57 cm)
- Back pieces (make 2 per sham): with teal, ch 90. Row 1: hdc in 3rd ch from hook and in each ch across. (88 hdc) Rows 2-29: ch 2 (does not count as a st), turn, hdc in BLO of each st across. Fasten off. (about 63 x 32 cm, ribbed)
- Lay one back piece over the other, both RS up, so they overlap by about 7 cm and the rectangle measures 63 x 57 cm. Pin the overlap.
- Edging rnd: join teal in a corner. Working through both layers where they overlap, 3 sc in corner st, sc in next 86 sts, 3 sc in corner st, 80 sc evenly along the side, 3 sc in corner st, sc in next 86 sts, 3 sc in corner st, 80 sc evenly along the other side. Join. Fasten off. (344 sts)
Sham Assembly
- Lay a back with the overlap side down. Place a front on top, RS up, so the outer loops reach the edge of the back.
- Sew every outer loop that reaches the edge to the edging rnd with a few small stitches.
- Tack the center of each spiral to the back with a few hidden stitches.
- Rep with the second sham. The teal back shows through the lacy loops between the medallions.
Ribbed Lumbar Pillow
- Front and back (make 2): with teal, ch 44. Row 1: hdc in 3rd ch from hook and in each ch across. (42 hdc) Rows 2-45: ch 2, turn, hdc in BLO of each st across. Fasten off. (about 30 x 50 cm)
- Hold the front and back WS together. Rnd 1: join teal in a corner through both layers, 3 sc in each corner, sc in each st along the short sides and 70 sc evenly along each long side. Insert the cushion form before closing the last side. Join. (236 sts)
- Rnd 2: ch 1, rev sc in each st around. Join and fasten off. (236 sts)
Finishing
Weave in all ends on the WS, hiding teal ends in teal sts and cream ends in cream sts. With two colors starting and stopping in every spiral, weave in each medallion’s ends as soon as it’s finished.
Wet block the bedspread on a large flat surface. Pin each medallion round, open the windows of the cream ring and spread the chain loops into an even net. Let it dry completely. A teal or dark sheet underneath makes the cream lace and spirals stand out.
Tips for Success
- Always slip a marker into the dropped loop. With two live loops, it’s easy for one to pull out.
- Count each color’s sts at the end of every spiral rnd. Both colors should always have the same number.
- Make the spirals and rings for many medallions first, then work all the bobble and loop rounds. You’ll get faster at each step.
- Pull each bobble firmly closed so it pops out like a bead.
- Lay the joined rows flat as you work, so you can see which loops face which neighbors.
Common Mistakes to Avoid
- Working over your own color. Each color must always work over the other’s sts. If one arm grows wider, it worked into its own sts.
- Missing the taper in Rnd 5. Without the graded sts, each arm ends in a step instead of a smooth curve.
- Joining the wrong loop. Joining loop 6 instead of loop 7 tilts the medallion and the rows drift. Count from loop 1 before each join.
- Gaps left open. If a gap loop is joined to only one of its two neighbors when both exist, a hole appears. Use the three-way join whenever both are there.
- A cupped medallion. If the window ring bowls, the dc in Rnd 7 are too tight. Keep the ch-2 sps relaxed.
Ways to Customize This Pattern
- Try navy and white for a nautical look, or rust and cream for a warm desert version.
- Make the bobbles cream and the loops teal for a different balance of color.
- Change the size: each medallion adds 21 cm in width, and each extra row adds about 18 cm in length.
- Make a round table topper from 7 medallions: one in the center and six around it.
- Use single medallions as coasters or placemats; work the loop round plain and add a round of sc.
Frequently asked questions
Each color works over the other color’s stitches from the round before, then waits while the other catches up. Because the colors keep leapfrogging, the rounds form a spiral instead of rings, with no seams.
Where three medallions meet, one chain loop of the newest medallion is slip-stitched to a loop of each of the other two. It closes the small gap with a lacy triangle and keeps the honeycomb firm.
Yes. Work Rnd 10 plain on every medallion, lay them out and sew the matching loops together. Joining as you go is faster and keeps the net between medallions even.
Wash it on a gentle cold cycle inside a large laundry bag, or by hand, and dry it flat. Pin the medallions round again while damp. Wash a test medallion first so the teal doesn’t bleed onto the cream.
The finished Teal and Cream Swirl Medallion Bedspread Crochet Pattern