Terracotta Diamond Lattice Crochet Bedspread Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Terracotta Diamond Lattice Crochet Bedspread Pattern
This crochet bedspread pattern builds an open diamond lattice in warm terracotta, with a small knot where the lines cross, a ridged border and a long fringe that hangs over the sides and foot of the bed. The net is worked in filet crochet, so the rows are easy to count and the edges stay straight, and the puff knots give it the look of knotted cord.
It is an advanced project because of its size and the discipline it asks for. You will work 81 rows of 148 stitches, follow an eight-row lattice repeat across 49 tiles, make a puff stitch at every crossing, and then add eight border rounds of more than 600 stitches and tie 255 fringe bunches by hand. Plan on 30 to 40 hours in total.
It suits crocheters who are comfortable with double crochet, filet tiles and puff stitches, and who want a light, airy bedspread that drapes well over a bed with white linen and natural wood. The finished spread is about 155 x 198 cm before the fringe, and you can change the width in steps of 8 tiles.
Materials
- Chunky cotton-blend yarn, terracotta about 1.6 kg in all, estimated (body 0.7 kg, border 0.35 kg, fringe 0.5 kg)
- Crochet hook 6.5 mm
- Yarn needle
- Stiff card about 33 cm long, for cutting the fringe
- Stitch markers one every 8 rows
- Scissors
- Flat surface and pins for blocking
Abbreviations
chchainscsingle crochethdchalf double crochetdcdouble crochetpuff(yarn over, insert hook in the stitch, pull up a loop) 3 times, yarn over and pull through all 7 loops on the hooksl stslip stitchst(s)stitch(es). A chain in a ch-2 space counts as a stitch.BLOback loop onlyRSright sideWSwrong sideFOfasten off( )xrepeat the stitches in brackets the number of times givenHow the Tiles Work
- Every row has 49 tiles and 148 stitches. The ch 3 at the start of each row counts as the first stitch, and each tile uses the next 3 stitches of the row below.
- Space: ch 2, skip 2 sts (or skip a ch-2 space), dc in the next st.
- Block: dc in each of the next 3 sts. If there is a ch-2 space below, work the first 2 dc into that space and the third dc into the next st.
- Knot: puff in the next st, puff in the next st, dc in the next st. This is worked like a block, so the stitch count stays the same. If there is a ch-2 space below, work both puffs into that space.
- Number the tiles 1 to 49 from the right-hand edge of the right side. On wrong-side rows you work from tile 49 down to tile 1.
- Knots are only worked on right-side rows, so the puffs always face the front.
- Each row starts with ch 3 and skips the first stitch of the row below. Each row ends with a dc in the top of the ch 3 of the row below. Turn at the end of every row.
Lattice Rows 1-8 (the repeat)
- Foundation: ch 150.
- Row 1 (RS, knots): the first 3 chains from the hook count as the first stitch. Work tiles 1-49 along the chain, starting in the 4th chain from the hook. For a block or knot, work into the next 3 chains. For a space, ch 2, skip 2 chains and dc in the next chain. Knots on tiles 1, 9, 17, 25, 33, 41 and 49. Spaces on all other tiles (7 knots, 42 spaces). Ch 3 and turn (148)
- Row 2 (WS): blocks on tiles 2, 8, 10, 16, 18, 24, 26, 32, 34, 40, 42 and 48. Spaces on all other tiles (12 blocks, 37 spaces). Ch 3 and turn (148)
- Row 3 (RS): blocks on tiles 3, 7, 11, 15, 19, 23, 27, 31, 35, 39, 43 and 47. Spaces on all other tiles (12 blocks, 37 spaces). Ch 3 and turn (148)
- Row 4 (WS): blocks on tiles 4, 6, 12, 14, 20, 22, 28, 30, 36, 38, 44 and 46. Spaces on all other tiles (12 blocks, 37 spaces). Ch 3 and turn (148)
- Row 5 (RS, knots): knots on tiles 5, 13, 21, 29, 37 and 45. Spaces on all other tiles (6 knots, 43 spaces). Ch 3 and turn (148)
- Row 6 (WS): same as row 4 (148)
- Row 7 (RS): same as row 3 (148)
- Row 8 (WS): same as row 2 (148)
- Check the lattice: from row 1 to row 5 the two diagonal lines of blocks should walk toward each other and cross at the knots on row 5, then move apart again. One lattice repeat is 8 tiles wide and 8 rows tall.
Body (rows 9-81)
- Repeat rows 1-8 (rows 9-16 repeat rows 1-8, and so on) until you have worked 80 rows, which is 10 full repeats. Work row 81 as row 1 (knots on tiles 1, 9, 17, 25, 33, 41 and 49).
- Place a stitch marker in the turning chain of row 1 of every repeat so you can count the repeats at a glance.
- Count the stitches at the end of every repeat. Every row must have exactly 148 stitches.
- After row 81, FO and weave in the end. The body should measure about 135 cm wide and 178 cm tall.
- Check the top and bottom: row 1 and row 81 are both knot rows, so the lattice starts and ends with the same edge.
Ridged Border
- Round 1 (sc): with the RS facing you and row 81 at the top, join yarn in the top right corner stitch. Ch 1 and work 3 sc in the corner stitch. Sc in each of the next 146 sts across row 81. Work 3 sc in the top left corner stitch.
- Work 2 sc in each of the 79 row ends down the left side (158). Work 3 sc in the bottom left corner.
- Work along the foundation chain with 1 sc in each chain, skipping the 2 extra chains next to the first stitch of row 1, so you get 146 sc between the corners. Work 3 sc in the bottom right corner.
- Work 2 sc in each of the 79 row ends up the right side (158). Join with a sl st to the first sc (620).
- Rounds 2-7: ch 2 (does not count as a stitch), hdc in the back loop only of each st around, working 3 hdc in the back loop of the middle st of each 3-st corner group. Join with a sl st to the first hdc at the end of each round. Each round adds 8 stitches: round 2 has 628, round 3 has 636, round 4 has 644, round 5 has 652, round 6 has 660 and round 7 has 668.
- Round 8: ch 1, sc in each st around, working 3 sc in the middle st of each corner group. Join with a sl st (676). FO and weave in the end.
- Check the border: it should be about 10 cm wide. The between-corner counts on round 8 are 160 along the foot and head and 172 down each side.
Fringe (255 bunches)
- Wrap yarn around the card and cut one end to get strands about 66 cm long. You need 765 strands (3 for each bunch).
- Fringe goes on the foot (the row 81 edge) and both sides. The head edge stays plain.
- Start at the first stitch above the bottom left corner group, on the left side. The path has 510 stitches: 172 up the left side, 3 in the foot-left corner, 160 along the foot, 3 in the foot-right corner and 172 down the right side.
- Fold 3 strands in half and pull the folded loop through the stitch with a crochet hook. Pull the ends through the loop and tighten. Tie a bunch in every 2nd stitch, starting with the first (255 bunches).
- Trim all the fringe to an even length of about 30 cm.
- For a fuller look, comb each bunch out with your fingers and steam it lightly so the fibers relax.
Finishing
Weave in all ends along the back, following the stitches for at least 8 cm. Block the bedspread by laying it flat on towels, pinning the corners and edges to about 155 x 198 cm, and misting it with water. Pin the border straight, but keep the pins out of the knots so you do not flatten the puffs. Let it dry fully before moving it.
Drape the bedspread with the head edge under the pillows and the fringe hanging over the foot and sides, and it will look like the photo. Trim any uneven fringe once the bedspread is on the bed.
Tips for Success
- Write the tile numbers for rows 1 to 5 on a card and keep it with your work. Rows 6, 7 and 8 repeat rows 4, 3 and 2.
- Count the stitches after every 8 rows. There should always be 148, and a wrong count is easiest to fix straight away.
- Keep your chains loose, especially the ch 2 in each space. Tight chains pull the diamonds out of shape.
- Pull up each puff loop to the height of a dc so every knot is the same size.
- Join new balls of yarn at the end of a row, so the ends do not hide inside a puff.
Common Mistakes to Avoid
- Skipping the wrong stitch after a ch 2 shifts a block by one stitch and breaks the diagonal. Count every tile against the row below as you go.
- Reading the tile numbers from the wrong side on WS rows flips the lattice. Remember that you start at tile 49 on every even row.
- Working puffs on a wrong-side row sends them to the back. Only work knots on rows 1, 5, 9 and so on.
- Working into the ch-2 space when you should work into the stitches changes the stitch count. Use the tile key every time.
- Tying the fringe too tightly puckers the border. Pull each bunch snug but not hard.
Ways to Customize This Pattern
- Swap terracotta for sage, cream or charcoal and keep the same pattern. The lattice reads clearly in any solid color.
- Make a lap throw: chain 78 (25 tiles, 76 stitches) and work 6 repeats of rows 1-8 plus row 1 again, about 70 x 105 cm before the border.
- Make a matching cushion front: chain 42 (13 tiles, 40 stitches) and work 3 repeats plus row 1, then add 3 border rounds and sew it to a plain back.
- Skip the fringe and finish with a round of sc and a round of reverse sc for a quicker, simpler edge.
- For smaller diamonds, use a lighter yarn and a smaller hook, and add tiles in steps of 8 so the width stays a multiple of 8 plus 1.
Frequently asked questions
The amounts above are estimates of about 1.6 kg. Weigh your swatch and scale it up by area for the body, then add the border and fringe. The fringe alone needs about 500 m of yarn, so check that before you buy.
Add or remove 8 tiles at a time. That is 24 stitches and 24 chains in the foundation (foundation = 3 x tiles + 3, stitches = 3 x tiles + 1). Keep the tile count at a multiple of 8 plus 1 so the lattice stays symmetrical, then recount the border and fringe from your new edge lengths.
No. The bedspread in the photo looks like knotted macrame cord. This pattern uses filet crochet to build a diamond net and puff stitches to stand in for the knots, so it looks similar from a distance but is crocheted, not knotted.
With a washable cotton blend, wash it on a gentle cycle in cool water, press out the water without wringing, and lay it flat to dry. Hanging a wet spread this large stretches the diamonds, so always dry it flat and comb out the fringe afterward.
The finished Terracotta Diamond Lattice Crochet Bedspread Pattern